From: Rui Miguel Silva <rmfrfs@gmail.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, Jacopo Mondi <jacopo@jmondi.org>,
Paul Elder <paul.elder@ideasonboard.com>,
kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH 3/4] media: imx: imx-mipi-csis: Implement the .get_frame_desc() operation
Date: Thu, 16 Jun 2022 01:09:02 +0100 [thread overview]
Message-ID: <20220616000902.kact2q2rqb73dffd@arch-thunder> (raw)
In-Reply-To: <YqpyZOvD3f9MFq39@pendragon.ideasonboard.com>
Hi Laurent,
On Thu, Jun 16, 2022 at 02:59:32AM +0300, Laurent Pinchart wrote:
> Hi Rui,
>
> On Thu, Jun 16, 2022 at 12:53:14AM +0100, Rui Miguel Silva wrote:
> > On Wed, Jun 15, 2022 at 10:26:01PM +0300, Laurent Pinchart wrote:
> > > The CSIS is connected to its sink through an SoC-specific gasket that
> > > needs to be configured. Depending on the platform, the gasket
> > > configuration requires knowing the CSI-2 DT. To provide the needed
> > > information, implement the .get_frame_desc() operation.
> > >
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > ---
> > > drivers/media/platform/nxp/imx-mipi-csis.c | 27 ++++++++++++++++++++++
> > > 1 file changed, 27 insertions(+)
> > >
> > > diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> > > index 8674aaad5fa0..905072871ed2 100644
> > > --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> > > +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> > > @@ -1160,6 +1160,32 @@ static int mipi_csis_set_fmt(struct v4l2_subdev *sd,
> > > return 0;
> > > }
> > >
> > > +static int mipi_csis_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> > > + struct v4l2_mbus_frame_desc *fd)
> > > +{
> > > + struct mipi_csis_device *csis = sd_to_mipi_csis_device(sd);
> > > + struct v4l2_mbus_frame_desc_entry *entry = &fd->entry[0];
> >
> > Think that you should check *fd before use here, other than that.
>
> fd isn't supposed to be null, the same way sd isn't, or the various
> format pointers passed to other subdev operations aren't. We don't check
> those either, that's why I haven't checked fd here.
Yeah, agree. Thanks.
Cheers,
Rui
>
> > Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
> >
> > > +
> > > + if (pad != CSIS_PAD_SOURCE)
> > > + return -EINVAL;
> > > +
> > > + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL;
> > > + fd->num_entries = 1;
> > > +
> > > + memset(entry, 0, sizeof(*entry));
> > > +
> > > + mutex_lock(&csis->lock);
> > > +
> > > + entry->flags = 0;
> > > + entry->pixelcode = csis->csis_fmt->code;
> > > + entry->bus.csi2.vc = 0;
> > > + entry->bus.csi2.dt = csis->csis_fmt->data_type;
> > > +
> > > + mutex_unlock(&csis->lock);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int mipi_csis_log_status(struct v4l2_subdev *sd)
> > > {
> > > struct mipi_csis_device *csis = sd_to_mipi_csis_device(sd);
> > > @@ -1184,6 +1210,7 @@ static const struct v4l2_subdev_pad_ops mipi_csis_pad_ops = {
> > > .enum_mbus_code = mipi_csis_enum_mbus_code,
> > > .get_fmt = mipi_csis_get_fmt,
> > > .set_fmt = mipi_csis_set_fmt,
> > > + .get_frame_desc = mipi_csis_get_frame_desc,
> > > };
> > >
> > > static const struct v4l2_subdev_ops mipi_csis_subdev_ops = {
>
> --
> Regards,
>
> Laurent Pinchart
next prev parent reply other threads:[~2022-06-16 0:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 19:25 [PATCH 0/4] media: imx: imx-mipi-csis: Add i.MX8MP support Laurent Pinchart
2022-06-15 19:25 ` [PATCH 1/4] media: imx: imx-mipi-csis: Set the subdev fwnode for endpoint matching Laurent Pinchart
2022-06-15 23:50 ` Rui Miguel Silva
2022-06-15 19:26 ` [PATCH 2/4] media: imx: imx-mipi-csis: Add version register Laurent Pinchart
2022-06-15 23:51 ` Rui Miguel Silva
2022-06-15 19:26 ` [PATCH 3/4] media: imx: imx-mipi-csis: Implement the .get_frame_desc() operation Laurent Pinchart
2022-06-15 23:53 ` Rui Miguel Silva
2022-06-15 23:59 ` Laurent Pinchart
2022-06-16 0:09 ` Rui Miguel Silva [this message]
2022-06-15 19:26 ` [PATCH 4/4] dt-bindings: media: nxp,imx-mipi-csi2: i.MX8MP support Laurent Pinchart
2022-06-15 21:01 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220616000902.kact2q2rqb73dffd@arch-thunder \
--to=rmfrfs@gmail.com \
--cc=jacopo@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=paul.elder@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox