From: paul.elder@ideasonboard.com
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, Rui Miguel Silva <rmfrfs@gmail.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Jacopo Mondi <jacopo@jmondi.org>,
kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH 2/3] media: imx: imx7-media-csi: Rename phys variables to dma_addr
Date: Thu, 8 Sep 2022 12:36:56 +0900 [thread overview]
Message-ID: <20220908033656.GC1140330@pyrite.rasen.tech> (raw)
In-Reply-To: <20220907191547.19255-3-laurent.pinchart@ideasonboard.com>
On Wed, Sep 07, 2022 at 10:15:46PM +0300, Laurent Pinchart wrote:
> All the phys variables and structure fields store a DMA address, not a
> physical address. Even if the two are effectively identical on all
> platforms where this driver is used due to the lack of IOMMU, rename the
> variables to dma_addr to make their usage clearer.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
> ---
> drivers/staging/media/imx/imx7-media-csi.c | 36 +++++++++++-----------
> 1 file changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
> index 1aef2cf41745..03986445c0da 100644
> --- a/drivers/staging/media/imx/imx7-media-csi.c
> +++ b/drivers/staging/media/imx/imx7-media-csi.c
> @@ -200,7 +200,7 @@ to_imx7_csi_vb2_buffer(struct vb2_buffer *vb)
>
> struct imx7_csi_dma_buf {
> void *virt;
> - dma_addr_t phys;
> + dma_addr_t dma_addr;
> unsigned long len;
> };
>
> @@ -384,13 +384,13 @@ static void imx7_csi_dmareq_rff_disable(struct imx7_csi *csi)
> imx7_csi_reg_write(csi, cr3, CSI_CSICR3);
> }
>
> -static void imx7_csi_update_buf(struct imx7_csi *csi, dma_addr_t phys,
> +static void imx7_csi_update_buf(struct imx7_csi *csi, dma_addr_t dma_addr,
> int buf_num)
> {
> if (buf_num == 1)
> - imx7_csi_reg_write(csi, phys, CSI_CSIDMASA_FB2);
> + imx7_csi_reg_write(csi, dma_addr, CSI_CSIDMASA_FB2);
> else
> - imx7_csi_reg_write(csi, phys, CSI_CSIDMASA_FB1);
> + imx7_csi_reg_write(csi, dma_addr, CSI_CSIDMASA_FB1);
> }
>
> static struct imx7_csi_vb2_buffer *imx7_csi_video_next_buf(struct imx7_csi *csi);
> @@ -402,19 +402,19 @@ static void imx7_csi_setup_vb2_buf(struct imx7_csi *csi)
> int i;
>
> for (i = 0; i < 2; i++) {
> - dma_addr_t phys;
> + dma_addr_t dma_addr;
>
> buf = imx7_csi_video_next_buf(csi);
> if (buf) {
> csi->active_vb2_buf[i] = buf;
> vb2_buf = &buf->vbuf.vb2_buf;
> - phys = vb2_dma_contig_plane_dma_addr(vb2_buf, 0);
> + dma_addr = vb2_dma_contig_plane_dma_addr(vb2_buf, 0);
> } else {
> csi->active_vb2_buf[i] = NULL;
> - phys = csi->underrun_buf.phys;
> + dma_addr = csi->underrun_buf.dma_addr;
> }
>
> - imx7_csi_update_buf(csi, phys, i);
> + imx7_csi_update_buf(csi, dma_addr, i);
> }
> }
>
> @@ -441,10 +441,10 @@ static void imx7_csi_free_dma_buf(struct imx7_csi *csi,
> struct imx7_csi_dma_buf *buf)
> {
> if (buf->virt)
> - dma_free_coherent(csi->dev, buf->len, buf->virt, buf->phys);
> + dma_free_coherent(csi->dev, buf->len, buf->virt, buf->dma_addr);
>
> buf->virt = NULL;
> - buf->phys = 0;
> + buf->dma_addr = 0;
> }
>
> static int imx7_csi_alloc_dma_buf(struct imx7_csi *csi,
> @@ -453,7 +453,7 @@ static int imx7_csi_alloc_dma_buf(struct imx7_csi *csi,
> imx7_csi_free_dma_buf(csi, buf);
>
> buf->len = PAGE_ALIGN(size);
> - buf->virt = dma_alloc_coherent(csi->dev, buf->len, &buf->phys,
> + buf->virt = dma_alloc_coherent(csi->dev, buf->len, &buf->dma_addr,
> GFP_DMA | GFP_KERNEL);
> if (!buf->virt)
> return -ENOMEM;
> @@ -714,7 +714,7 @@ static void imx7_csi_vb2_buf_done(struct imx7_csi *csi)
> {
> struct imx7_csi_vb2_buffer *done, *next;
> struct vb2_buffer *vb;
> - dma_addr_t phys;
> + dma_addr_t dma_addr;
>
> done = csi->active_vb2_buf[csi->buf_num];
> if (done) {
> @@ -729,14 +729,14 @@ static void imx7_csi_vb2_buf_done(struct imx7_csi *csi)
> /* get next queued buffer */
> next = imx7_csi_video_next_buf(csi);
> if (next) {
> - phys = vb2_dma_contig_plane_dma_addr(&next->vbuf.vb2_buf, 0);
> + dma_addr = vb2_dma_contig_plane_dma_addr(&next->vbuf.vb2_buf, 0);
> csi->active_vb2_buf[csi->buf_num] = next;
> } else {
> - phys = csi->underrun_buf.phys;
> + dma_addr = csi->underrun_buf.dma_addr;
> csi->active_vb2_buf[csi->buf_num] = NULL;
> }
>
> - imx7_csi_update_buf(csi, phys, csi->buf_num);
> + imx7_csi_update_buf(csi, dma_addr, csi->buf_num);
> }
>
> static irqreturn_t imx7_csi_irq_handler(int irq, void *data)
> @@ -1301,14 +1301,14 @@ static bool imx7_csi_fast_track_buffer(struct imx7_csi *csi,
> struct imx7_csi_vb2_buffer *buf)
> {
> unsigned long flags;
> - dma_addr_t phys;
> + dma_addr_t dma_addr;
> int buf_num;
> u32 isr;
>
> if (!csi->is_streaming)
> return false;
>
> - phys = vb2_dma_contig_plane_dma_addr(&buf->vbuf.vb2_buf, 0);
> + dma_addr = vb2_dma_contig_plane_dma_addr(&buf->vbuf.vb2_buf, 0);
>
> /*
> * buf_num holds the framebuffer ID of the most recently (*not* the next
> @@ -1345,7 +1345,7 @@ static bool imx7_csi_fast_track_buffer(struct imx7_csi *csi,
> return false;
> }
>
> - imx7_csi_update_buf(csi, phys, buf_num);
> + imx7_csi_update_buf(csi, dma_addr, buf_num);
>
> isr = imx7_csi_reg_read(csi, CSI_CSISR);
> if (isr & (buf_num ? BIT_DMA_TSF_DONE_FB1 : BIT_DMA_TSF_DONE_FB2)) {
next prev parent reply other threads:[~2022-09-08 3:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 19:15 [PATCH 0/3] media: imx: imx7-media-csi: Small fix and cleanups Laurent Pinchart
2022-09-07 19:15 ` [PATCH 1/3] media: imx: imx7-media-csi: Move variable to loop scope Laurent Pinchart
2022-09-08 3:20 ` paul.elder
2022-09-07 19:15 ` [PATCH 2/3] media: imx: imx7-media-csi: Rename phys variables to dma_addr Laurent Pinchart
2022-09-08 3:36 ` paul.elder [this message]
2022-09-07 19:15 ` [PATCH 3/3] media: imx: imx7-media-csi: Clear BIT_MIPI_DOUBLE_CMPNT for <16b formats Laurent Pinchart
2022-09-08 3:49 ` paul.elder
2022-09-08 15:02 ` [PATCH 0/3] media: imx: imx7-media-csi: Small fix and cleanups Rui Miguel Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908033656.GC1140330@pyrite.rasen.tech \
--to=paul.elder@ideasonboard.com \
--cc=jacopo@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rmfrfs@gmail.com \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox