[PATCH v8 4/4] media: i2c: imx334: update pixel and link frequency

[shravan kumar <shravan.chippa@microchip.com>]

From: Shravan Chippa <shravan.chippa@microchip.com>

Update pixel_rate and link frequency for 1920x1080@30
while changing mode.

Add dummy ctrl cases for pixel_rate and link frequency
to avoid error while changing the modes dynamically

Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/media/i2c/imx334.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index 0315e1c9541d..8c3ba660abae 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -50,6 +50,7 @@
 
 /* CSI2 HW configuration */
 #define IMX334_LINK_FREQ	891000000
+#define IMX334_LINK_FREQ_445M	445500000
 #define IMX334_NUM_DATA_LANES	4
 
 #define IMX334_REG_MIN		0x00
@@ -145,6 +146,7 @@ struct imx334 {
 
 static const s64 link_freq[] = {
 	IMX334_LINK_FREQ,
+	IMX334_LINK_FREQ_445M,
 };
 
 /* Sensor mode registers */
@@ -468,7 +470,7 @@ static const struct imx334_mode supported_modes[] = {
 		.vblank_min = 90,
 		.vblank_max = 132840,
 		.pclk = 74250000,
-		.link_freq_idx = 0,
+		.link_freq_idx = 1,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
 			.regs = mode_1920x1080_regs,
@@ -598,6 +600,11 @@ static int imx334_update_controls(struct imx334 *imx334,
 	if (ret)
 		return ret;
 
+	ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk,
+				       mode->pclk, 1, mode->pclk);
+	if (ret)
+		return ret;
+
 	ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, mode->hblank,
 				       mode->hblank, 1, mode->hblank);
 	if (ret)
@@ -698,6 +705,8 @@ static int imx334_set_ctrl(struct v4l2_ctrl *ctrl)
 		pm_runtime_put(imx334->dev);
 
 		break;
+	case V4L2_CID_PIXEL_RATE:
+	case V4L2_CID_LINK_FREQ:
 	case V4L2_CID_HBLANK:
 		ret = 0;
 		break;
-- 
2.34.1