public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Manivannan Sadhasivam <mani@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org,
	Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v2 06/13] media: i2c: imx290: Use CSI timings as per datasheet
Date: Fri,  3 Feb 2023 19:18:04 +0000	[thread overview]
Message-ID: <20230203191811.947697-7-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20230203191811.947697-1-dave.stevenson@raspberrypi.com>

Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" added support for the increased link frequencies
on 2 data lanes, but didn't update the CSI timing registers in
accordance with the datasheet.

Use the specified settings.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/imx290.c | 126 +++++++++++++++++++++++++++++++------
 1 file changed, 106 insertions(+), 20 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index a5ea59353a4d..2abe4cdab819 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -190,6 +190,18 @@ struct imx290_mode {
 	u32 data_size;
 };
 
+struct imx290_csi_cfg {
+	u16 repetition;
+	u16 tclkpost;
+	u16 thszero;
+	u16 thsprepare;
+	u16 tclktrail;
+	u16 thstrail;
+	u16 tclkzero;
+	u16 tclkprepare;
+	u16 tlpx;
+};
+
 struct imx290 {
 	struct device *dev;
 	struct clk *xclk;
@@ -289,16 +301,6 @@ static const struct imx290_regval imx290_1080p_settings[] = {
 	{ IMX290_INCKSEL4, 0x01 },
 	{ IMX290_INCKSEL5, 0x1a },
 	{ IMX290_INCKSEL6, 0x1a },
-	/* data rate settings */
-	{ IMX290_REPETITION, 0x10 },
-	{ IMX290_TCLKPOST, 87 },
-	{ IMX290_THSZERO, 55 },
-	{ IMX290_THSPREPARE, 31 },
-	{ IMX290_TCLKTRAIL, 31 },
-	{ IMX290_THSTRAIL, 31 },
-	{ IMX290_TCLKZERO, 119 },
-	{ IMX290_TCLKPREPARE, 31 },
-	{ IMX290_TLPX, 23 },
 };
 
 static const struct imx290_regval imx290_720p_settings[] = {
@@ -314,16 +316,6 @@ static const struct imx290_regval imx290_720p_settings[] = {
 	{ IMX290_INCKSEL4, 0x01 },
 	{ IMX290_INCKSEL5, 0x1a },
 	{ IMX290_INCKSEL6, 0x1a },
-	/* data rate settings */
-	{ IMX290_REPETITION, 0x10 },
-	{ IMX290_TCLKPOST, 79 },
-	{ IMX290_THSZERO, 47 },
-	{ IMX290_THSPREPARE, 23 },
-	{ IMX290_TCLKTRAIL, 23 },
-	{ IMX290_THSTRAIL, 23 },
-	{ IMX290_TCLKZERO, 87 },
-	{ IMX290_TCLKPREPARE, 23 },
-	{ IMX290_TLPX, 23 },
 };
 
 static const struct imx290_regval imx290_10bit_settings[] = {
@@ -344,6 +336,58 @@ static const struct imx290_regval imx290_12bit_settings[] = {
 	{ IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 },
 };
 
+static const struct imx290_csi_cfg imx290_csi_222_75mhz = {
+	/* 222.25MHz or 445.5Mbit/s per lane */
+	.repetition = 0x10,
+	.tclkpost = 87,
+	.thszero = 55,
+	.thsprepare = 31,
+	.tclktrail = 31,
+	.thstrail = 31,
+	.tclkzero = 119,
+	.tclkprepare = 31,
+	.tlpx = 23,
+};
+
+static const struct imx290_csi_cfg imx290_csi_445_5mhz = {
+	/* 445.5MHz or 891Mbit/s per lane */
+	.repetition = 0x00,
+	.tclkpost = 119,
+	.thszero = 103,
+	.thsprepare = 71,
+	.tclktrail = 55,
+	.thstrail = 63,
+	.tclkzero = 255,
+	.tclkprepare = 63,
+	.tlpx = 55,
+};
+
+static const struct imx290_csi_cfg imx290_csi_148_5mhz = {
+	/* 148.5MHz or 297Mbit/s per lane */
+	.repetition = 0x10,
+	.tclkpost = 79,
+	.thszero = 47,
+	.thsprepare = 23,
+	.tclktrail = 23,
+	.thstrail = 23,
+	.tclkzero = 87,
+	.tclkprepare = 23,
+	.tlpx = 23,
+};
+
+static const struct imx290_csi_cfg imx290_csi_297mhz = {
+	/* 297MHz or 594Mbit/s per lane */
+	.repetition = 0x00,
+	.tclkpost = 103,
+	.thszero = 87,
+	.thsprepare = 47,
+	.tclktrail = 39,
+	.thstrail = 47,
+	.tclkzero = 191,
+	.tclkprepare = 47,
+	.tlpx = 39,
+};
+
 /* supported link frequencies */
 #define FREQ_INDEX_1080P	0
 #define FREQ_INDEX_720P		1
@@ -557,6 +601,42 @@ static int imx290_set_black_level(struct imx290 *imx290,
 			    black_level >> (16 - bpp), err);
 }
 
+static int imx290_set_csi_config(struct imx290 *imx290)
+{
+	const s64 *link_freqs = imx290_link_freqs_ptr(imx290);
+	const struct imx290_csi_cfg *csi_cfg;
+	int ret = 0;
+
+	switch (link_freqs[imx290->current_mode->link_freq_index]) {
+	case 445500000:
+		csi_cfg = &imx290_csi_445_5mhz;
+		break;
+	case 297000000:
+		csi_cfg = &imx290_csi_297mhz;
+		break;
+	case 222750000:
+		csi_cfg = &imx290_csi_222_75mhz;
+		break;
+	case 148500000:
+		csi_cfg = &imx290_csi_148_5mhz;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	imx290_write(imx290, IMX290_REPETITION, csi_cfg->repetition, &ret);
+	imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret);
+	imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret);
+	imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret);
+	imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret);
+	imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret);
+	imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret);
+	imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret);
+	imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret);
+
+	return ret;
+}
+
 static int imx290_setup_format(struct imx290 *imx290,
 			       const struct v4l2_mbus_framefmt *format)
 {
@@ -769,6 +849,12 @@ static int imx290_start_streaming(struct imx290 *imx290,
 		return ret;
 	}
 
+	ret = imx290_set_csi_config(imx290);
+	if (ret < 0) {
+		dev_err(imx290->dev, "Could not set csi cfg\n");
+		return ret;
+	}
+
 	/* Apply the register values related to current frame format */
 	format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
 	ret = imx290_setup_format(imx290, format);
-- 
2.34.1


  parent reply	other threads:[~2023-02-03 19:18 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-03 19:17 [PATCH v2 00/13] imx290: Minor fixes, support for alternate INCK, and more ctrls Dave Stevenson
2023-02-03 19:17 ` [PATCH v2 01/13] media: i2c: imx290: Match kernel coding style on whitespace Dave Stevenson
2023-02-03 19:18 ` [PATCH v2 02/13] media: i2c: imx290: Set the colorspace fields in the format Dave Stevenson
2023-02-07  1:34   ` Laurent Pinchart
2023-02-03 19:18 ` [PATCH v2 03/13] media: i2c: imx290: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks Dave Stevenson
2023-02-03 19:18 ` [PATCH v2 04/13] media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s Dave Stevenson
2023-02-03 19:18 ` [PATCH v2 05/13] media: i2c: imx290: Support 60fps in 2 lane operation Dave Stevenson
2023-02-03 19:18 ` Dave Stevenson [this message]
2023-02-06  7:48   ` [PATCH v2 06/13] media: i2c: imx290: Use CSI timings as per datasheet Alexander Stein
2023-02-03 19:18 ` [PATCH v2 07/13] media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write Dave Stevenson
2023-02-06  7:59   ` Alexander Stein
2023-02-03 19:18 ` [PATCH v2 08/13] media: i2c: imx290: Convert V4L2_CID_VBLANK " Dave Stevenson
2023-02-03 19:18 ` [PATCH v2 09/13] media: i2c: imx290: VMAX is mode dependent Dave Stevenson
2023-02-07  1:46   ` Laurent Pinchart
2023-02-03 19:18 ` [PATCH v2 10/13] media: i2c: imx290: Remove duplicated write to IMX290_CTRL_07 Dave Stevenson
2023-02-03 19:18 ` [PATCH v2 11/13] media: i2c: imx290: Add support for 74.25MHz external clock Dave Stevenson
2023-02-06  8:24   ` Alexander Stein
2023-02-07  1:50   ` Laurent Pinchart
2023-02-03 19:18 ` [PATCH v2 12/13] media: i2c: imx290: Add support for H & V Flips Dave Stevenson
2023-02-07  1:52   ` Laurent Pinchart
2023-02-03 19:18 ` [PATCH v2 13/13] media: i2c: imx290: Add the error code to logs in start_streaming Dave Stevenson
2023-02-06  8:27   ` Alexander Stein
2023-02-07  1:53   ` Laurent Pinchart
2023-02-07  1:55 ` [PATCH v2 00/13] imx290: Minor fixes, support for alternate INCK, and more ctrls Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230203191811.947697-7-dave.stevenson@raspberrypi.com \
    --to=dave.stevenson@raspberrypi.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox