Linux Media Controller development
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] media: imx: imx7-media-csi: Set pixfmt field, width, height & sizeimage
Date: Fri, 7 Apr 2023 05:22:14 +0300	[thread overview]
Message-ID: <20230407022214.GE31272@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230406135637.257580-1-alexander.stein@ew.tq-group.com>

Hi Alexander,

Thank you for the patch.

On Thu, Apr 06, 2023 at 03:56:37PM +0200, Alexander Stein wrote:
> Fixes the following v4l2-comliance errors for VIDIOC_TRY_FMT:
> * !pix.width || !pix.height
> * !pix.sizeimage
> * pix.field == V4L2_FIELD_ANY
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> This patch is based on [1] and fixes the last v4l2-compliance errors and
> a 'WARN_ON(!plane_sizes[i])' in vb2_core_reqbufs().
> My platform: TQMa8MQML (imx8mm) + imx327lqr. 
> 
> The v4l2-compliance output:
> --8<--
> v4l2-compliance 1.24.1-5010, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 8799081b1436 2023-02-24 17:03:58
> 
> Compliance test for imx-capture device /dev/video0:
> 
> Driver Info:
>         Driver name      : imx-capture
>         Card type        : imx-capture
>         Bus info         : platform:32e20000.csi
>         Driver version   : 6.3.0
>         Capabilities     : 0xa4200001
>                 Video Capture
>                 I/O MC
>                 Streaming
>                 Extended Pix Format
>                 Device Capabilities
>         Device Caps      : 0x24200001
>                 Video Capture
>                 I/O MC
>                 Streaming
>                 Extended Pix Format
> Media Driver Info:
>         Driver name      : imx7-csi
>         Model            : imx-media
>         Serial           : 
>         Bus info         : platform:32e20000.csi
>         Media version    : 6.3.0
>         Hardware revision: 0x00000000 (0)
>         Driver version   : 6.3.0
> Interface Info:
>         ID               : 0x03000006
>         Type             : V4L Video
> Entity Info:
>         ID               : 0x00000004 (4)
>         Name             : csi capture
>         Function         : V4L2 I/O
>         Pad 0x01000005   : 0: Sink
>           Link 0x02000008: from remote pad 0x1000003 of entity 'csi' (Video Interface Bridge): Data, Enabled, Immutable
> 
> Required ioctls:
>         test MC information (see 'Media Driver Info' above): OK
>         test VIDIOC_QUERYCAP: OK
>         test invalid ioctls: OK
> 
> Allow for multiple opens:
>         test second /dev/video0 open: OK
>         test VIDIOC_QUERYCAP: OK
>         test VIDIOC_G/S_PRIORITY: OK
>         test for unlimited opens: OK
> 
> Debug ioctls:
>         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>         test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>         test VIDIOC_G/S/ENUMINPUT: OK
>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>         Inputs: 1 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>         Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>         test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls (Input 0):
>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>         test VIDIOC_QUERYCTRL: OK (Not Supported)
>         test VIDIOC_G/S_CTRL: OK (Not Supported)
>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>         Standard Controls: 0 Private Controls: 0
> 
> Format ioctls (Input 0):
>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>         test VIDIOC_G/S_PARM: OK (Not Supported)
>         test VIDIOC_G_FBUF: OK (Not Supported)
>         test VIDIOC_G_FMT: OK
>                 fail: v4l2-test-formats.cpp(468): !pix.width || !pix.height
>         test VIDIOC_TRY_FMT: FAIL
>                 fail: v4l2-test-formats.cpp(468): !pix.width || !pix.height
>         test VIDIOC_S_FMT: FAIL
>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>         test Cropping: OK (Not Supported)
>                 fail: v4l2-test-formats.cpp(1726): !sel_padded.r.width || !sel_padded.r.height
>                 fail: v4l2-test-formats.cpp(1778): testBasicCompose(node, V4L2_BUF_TYPE_VIDEO_CAPTURE)
>         test Composing: FAIL
>         test Scaling: OK
> 
> Codec ioctls (Input 0):
>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls (Input 0):
>                 fail: v4l2-test-buffers.cpp(607): q.reqbufs(node, 1)
>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
>                 fail: v4l2-test-buffers.cpp(783): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
>                 fail: v4l2-test-buffers.cpp(784): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
>         test VIDIOC_EXPBUF: OK (Not Supported)
>         test Requests: OK (Not Supported)
> 
> Total for imx-capture device /dev/video0: 46, Succeeded: 42, Failed: 4, Warnings: 0
> --8<--
> 
> Best regards,
> Alexander
> 
> [1] https://lore.kernel.org/all/20230321072707.678039-1-alexander.stein@ew.tq-group.com/
> 
>  drivers/media/platform/nxp/imx7-media-csi.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/media/platform/nxp/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
> index 389d7d88b341..1888559a6531 100644
> --- a/drivers/media/platform/nxp/imx7-media-csi.c
> +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> @@ -1147,6 +1147,7 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format *pixfmt,
>  {
>  	struct v4l2_mbus_framefmt fmt_src;
>  	const struct imx7_csi_pixfmt *cc;
> +	unsigned int walign;
>  
>  	/*
>  	 * Find the pixel format, default to the first supported format if not
> @@ -1175,6 +1176,17 @@ __imx7_csi_video_try_fmt(struct v4l2_pix_format *pixfmt,
>  	v4l2_fill_mbus_format(&fmt_src, pixfmt, 0);
>  	imx7_csi_mbus_fmt_to_pix_fmt(pixfmt, &fmt_src, cc);
>  
> +	if (cc->bpp == 8)
> +		walign = 8;
> +	else
> +		walign = 4;
> +
> +	v4l_bound_align_image(&pixfmt->width, 1, 0xffff / (cc->bpp / 8), walign,
> +			      &pixfmt->height, 1, 0xffff, 1, 0);
> +
> +	pixfmt->sizeimage = (cc->bpp * pixfmt->width * pixfmt->height) / BITS_PER_BYTE;

No need for parentheses, and I'd wrap the line. Or replace BITS_PER_BYTE
with 8:

	pixfmt->sizeimage = pixfmt->width * pixfmt->height * cc->bpp / 8;

which I think is as readable.

You also need to handle bytesperline.

I'd go one step further, and get rid of imx7_csi_mbus_fmt_to_pix_fmt().
This is historical, there's no need to convert between mbus and pixel
formats anymore.

> +	pixfmt->field = V4L2_FIELD_NONE;

This should probably be moved to a separate patch. Interlaced format
handling is broken, there's no IDMAC on i.MX7. The code comes from
shared helpers with i.MX6 before the driver got destaged.

> +
>  	if (compose) {
>  		compose->width = fmt_src.width;
>  		compose->height = fmt_src.height;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2023-04-07  2:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-06 13:56 [PATCH 1/1] media: imx: imx7-media-csi: Set pixfmt field, width, height & sizeimage Alexander Stein
2023-04-07  2:22 ` Laurent Pinchart [this message]
2023-04-11  7:38   ` Alexander Stein
2023-04-12 13:13     ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230407022214.GE31272@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rmfrfs@gmail.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox