From: kernel test robot <lkp@intel.com>
To: "Arseniy Krasnov" <AVKrasnov@sberdevices.ru>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
"Sumit Semwal" <sumit.semwal@linaro.org>,
"Christian König" <christian.koenig@amd.com>
Cc: oe-kbuild-all@lists.linux.dev, oxffffaa@gmail.com,
kernel@sberdevices.ru, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org, linaro-mm-sig@lists.linaro.org
Subject: Re: [PATCH v1] mtd: rawnand: macronix: OTP access for MX30LFxG18AC
Date: Wed, 26 Apr 2023 17:21:55 +0800 [thread overview]
Message-ID: <202304261704.eyrD5KVk-lkp@intel.com> (raw)
In-Reply-To: <20230426072455.3887717-1-AVKrasnov@sberdevices.ru>
Hi Arseniy,
kernel test robot noticed the following build errors:
[auto build test ERROR on mtd/nand/next]
[also build test ERROR on linus/master v6.3 next-20230425]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Arseniy-Krasnov/mtd-rawnand-macronix-OTP-access-for-MX30LFxG18AC/20230426-153143
base: https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
patch link: https://lore.kernel.org/r/20230426072455.3887717-1-AVKrasnov%40sberdevices.ru
patch subject: [PATCH v1] mtd: rawnand: macronix: OTP access for MX30LFxG18AC
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20230426/202304261704.eyrD5KVk-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/3529f3465e99379489b59c035a8a0506c3756ef4
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Arseniy-Krasnov/mtd-rawnand-macronix-OTP-access-for-MX30LFxG18AC/20230426-153143
git checkout 3529f3465e99379489b59c035a8a0506c3756ef4
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/mtd/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202304261704.eyrD5KVk-lkp@intel.com/
All error/warnings (new ones prefixed by >>):
drivers/mtd/nand/raw/nand_macronix.c: In function '__macronix_30lfxg18ac_rw_otp':
>> drivers/mtd/nand/raw/nand_macronix.c:384:19: error: implicit declaration of function 'kmalloc'; did you mean 'mm_alloc'? [-Werror=implicit-function-declaration]
384 | dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL);
| ^~~~~~~
| mm_alloc
>> drivers/mtd/nand/raw/nand_macronix.c:384:17: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
384 | dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL);
| ^
>> drivers/mtd/nand/raw/nand_macronix.c:437:9: error: implicit declaration of function 'kfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
437 | kfree(dma_buf);
| ^~~~~
| kvfree
cc1: some warnings being treated as errors
vim +384 drivers/mtd/nand/raw/nand_macronix.c
366
367 static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd,
368 loff_t offs_in_flash,
369 size_t len, size_t *retlen,
370 u_char *buf, bool write)
371 {
372 struct nand_chip *nand;
373 size_t bytes_handled;
374 unsigned long page;
375 off_t offs_in_page;
376 void *dma_buf;
377 int ret;
378
379 /* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer,
380 * so allocate properly aligned memory for it. This is
381 * needed because cross page accesses may lead to unaligned
382 * buffer address for DMA.
383 */
> 384 dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL);
385 if (!dma_buf)
386 return -ENOMEM;
387
388 nand = mtd_to_nand(mtd);
389 nand_select_target(nand, 0);
390
391 ret = macronix_30lfxg18ac_otp_enable(nand);
392 if (ret)
393 goto out_otp;
394
395 page = offs_in_flash;
396 /* 'page' will be result of division. */
397 offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE);
398 bytes_handled = 0;
399
400 while (bytes_handled < len &&
401 page < MACRONIX_30LFXG18AC_OTP_PAGES) {
402 size_t bytes_to_handle;
403
404 bytes_to_handle = min_t(size_t, len - bytes_handled,
405 MACRONIX_30LFXG18AC_OTP_PAGE_SIZE -
406 offs_in_page);
407
408 if (write) {
409 memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle);
410 ret = nand_prog_page_op(nand, page, offs_in_page,
411 dma_buf, bytes_to_handle);
412 } else {
413 ret = nand_read_page_op(nand, page, offs_in_page,
414 dma_buf, bytes_to_handle);
415 if (!ret)
416 memcpy(&buf[bytes_handled], dma_buf,
417 bytes_to_handle);
418 }
419 if (ret)
420 goto out_otp;
421
422 bytes_handled += bytes_to_handle;
423 offs_in_page = 0;
424 page++;
425 }
426
427 *retlen = bytes_handled;
428
429 out_otp:
430 if (ret)
431 dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret);
432
433 ret = macronix_30lfxg18ac_otp_disable(nand);
434 WARN(ret, "failed to leave OTP mode after %s\n",
435 write ? "write" : "read");
436 nand_deselect_target(nand);
> 437 kfree(dma_buf);
438
439 return ret;
440 }
441
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
next prev parent reply other threads:[~2023-04-26 9:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-26 7:24 [PATCH v1] mtd: rawnand: macronix: OTP access for MX30LFxG18AC Arseniy Krasnov
2023-04-26 9:21 ` kernel test robot [this message]
2023-04-26 13:06 ` kernel test robot
2023-04-26 13:37 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202304261704.eyrD5KVk-lkp@intel.com \
--to=lkp@intel.com \
--cc=AVKrasnov@sberdevices.ru \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@sberdevices.ru \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=oxffffaa@gmail.com \
--cc=richard@nod.at \
--cc=sumit.semwal@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox