From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: guoniu.zhou@oss.nxp.com
Cc: linux-media@vger.kernel.org, linux-imx@nxp.com,
devicetree@vger.kernel.org, mchehab@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, xavier.roumegue@oss.nxp.com,
kernel@pengutronix.de, jacopo.mondi@ideasonboard.com,
sakari.ailus@linux.intel.com
Subject: Re: [PATCH v5 3/3] media: nxp: imx8-isi: add ISI support for i.MX93
Date: Fri, 28 Jul 2023 00:48:31 +0300 [thread overview]
Message-ID: <20230727214831.GA28824@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230629013621.2388121-4-guoniu.zhou@oss.nxp.com>
Hi Guoniu,
Thank you for the patch.
On Thu, Jun 29, 2023 at 09:36:21AM +0800, guoniu.zhou@oss.nxp.com wrote:
> From: "Guoniu.zhou" <guoniu.zhou@nxp.com>
>
> i.MX93 use a different gasket which has different register definition
s/use/uses/
s/definition/definitions/
> compared with i.MX8. Hence implement the gasket callbacks in order to
> add ISI support for i.MX93.
>
> Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> .../platform/nxp/imx8-isi/imx8-isi-core.c | 15 ++++++++++
> .../platform/nxp/imx8-isi/imx8-isi-core.h | 2 ++
> .../platform/nxp/imx8-isi/imx8-isi-gasket.c | 30 +++++++++++++++++++
> 3 files changed, 47 insertions(+)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> index 5165f8960c2c..27bd18b7ee65 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> @@ -307,6 +307,20 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = {
> .has_36bit_dma = true,
> };
>
> +static const struct mxc_isi_plat_data mxc_imx93_data = {
> + .model = MXC_ISI_IMX93,
> + .num_ports = 1,
> + .num_channels = 1,
> + .reg_offset = 0,
> + .ier_reg = &mxc_imx8_isi_ier_v2,
> + .set_thd = &mxc_imx8_isi_thd_v1,
> + .clks = mxc_imx8mn_clks,
> + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> + .buf_active_reverse = true,
> + .gasket_ops = &mxc_imx93_gasket_ops,
> + .has_36bit_dma = false,
> +};
> +
> /* -----------------------------------------------------------------------------
> * Power management
> */
> @@ -518,6 +532,7 @@ static int mxc_isi_remove(struct platform_device *pdev)
> static const struct of_device_id mxc_isi_of_match[] = {
> { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
> { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
> + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
> { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, mxc_isi_of_match);
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> index 78ca047d93d1..2810ebe9b5f7 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -158,6 +158,7 @@ struct mxc_gasket_ops {
> enum model {
> MXC_ISI_IMX8MN,
> MXC_ISI_IMX8MP,
> + MXC_ISI_IMX93,
> };
>
> struct mxc_isi_plat_data {
> @@ -295,6 +296,7 @@ struct mxc_isi_dev {
> };
>
> extern const struct mxc_gasket_ops mxc_imx8_gasket_ops;
> +extern const struct mxc_gasket_ops mxc_imx93_gasket_ops;
>
> int mxc_isi_crossbar_init(struct mxc_isi_dev *isi);
> void mxc_isi_crossbar_cleanup(struct mxc_isi_crossbar *xbar);
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> index 1d632dc60699..50ac1d3a2b6f 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> @@ -53,3 +53,33 @@ const struct mxc_gasket_ops mxc_imx8_gasket_ops = {
> .enable = mxc_imx8_gasket_enable,
> .disable = mxc_imx8_gasket_disable,
> };
> +
> +/* -----------------------------------------------------------------------------
> + * i.MX93 gasket
> + **/
Extra star here too.
> +
> +#define DISP_MIX_CAMERA_MUX 0x30
> +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3)
> +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16)
Let's add a blank line here.
With those small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
I'll make the changes locally and include the series in my next pull
request.
> +static void mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
> + const struct v4l2_mbus_frame_desc *fd,
> + const struct v4l2_mbus_framefmt *fmt,
> + const unsigned int port)
> +{
> + u32 val;
> +
> + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
> + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
> + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
> +}
> +
> +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
> + unsigned int port)
> +{
> + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0);
> +}
> +
> +const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
> + .enable = mxc_imx93_gasket_enable,
> + .disable = mxc_imx93_gasket_disable,
> +};
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-07-27 21:48 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-29 1:36 [PATCH v5 0/3] add ISI support for iMX93 guoniu.zhou
2023-06-29 1:36 ` [PATCH v5 1/3] media: dt-bindings: nxp,imx8-isi: add i.MX93 ISI compatible string guoniu.zhou
2023-06-29 1:36 ` [PATCH v5 2/3] media: nxp: imx8-isi: move i.MX8 gasket configuration to an ops structure guoniu.zhou
2023-07-27 21:41 ` Laurent Pinchart
2023-07-28 1:23 ` G.N. Zhou (OSS)
2023-06-29 1:36 ` [PATCH v5 3/3] media: nxp: imx8-isi: add ISI support for i.MX93 guoniu.zhou
2023-06-29 6:43 ` Alexander Stein
2023-06-29 7:07 ` G.N. Zhou (OSS)
2023-06-29 7:59 ` Alexander Stein
2023-06-29 8:23 ` G.N. Zhou (OSS)
2023-07-27 21:48 ` Laurent Pinchart [this message]
2023-07-28 1:23 ` G.N. Zhou (OSS)
2023-07-27 1:22 ` [PATCH v5 0/3] add ISI support for iMX93 G.N. Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230727214831.GA28824@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=guoniu.zhou@oss.nxp.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox