From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: laurent.pinchart@ideasonboard.com, tomi.valkeinen@ideasonboard.com
Subject: [PATCH 1/1] media: v4l: subdev: Always compile sub-device state access functions
Date: Fri, 10 Nov 2023 12:10:49 +0200 [thread overview]
Message-ID: <20231110101049.890577-1-sakari.ailus@linux.intel.com> (raw)
Compile sub-device state information access functions
v4l2_subdev_state_get_{format,crop,compose} unconditionally as they are
now also used by plain V4L2 drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-subdev.c | 204 +++++++++++++-------------
include/media/v4l2-subdev.h | 128 ++++++++--------
2 files changed, 166 insertions(+), 166 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 57ef4fce1186..efb39172b20f 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -1524,6 +1524,108 @@ void v4l2_subdev_cleanup(struct v4l2_subdev *sd)
}
EXPORT_SYMBOL_GPL(v4l2_subdev_cleanup);
+struct v4l2_mbus_framefmt *
+__v4l2_subdev_state_get_format(struct v4l2_subdev_state *state,
+ unsigned int pad, u32 stream)
+{
+ struct v4l2_subdev_stream_configs *stream_configs;
+ unsigned int i;
+
+ if (WARN_ON_ONCE(!state))
+ return NULL;
+
+ if (state->pads) {
+ if (stream)
+ return NULL;
+
+ if (pad >= state->sd->entity.num_pads)
+ return NULL;
+
+ return &state->pads[pad].format;
+ }
+
+ lockdep_assert_held(state->lock);
+
+ stream_configs = &state->stream_configs;
+
+ for (i = 0; i < stream_configs->num_configs; ++i) {
+ if (stream_configs->configs[i].pad == pad &&
+ stream_configs->configs[i].stream == stream)
+ return &stream_configs->configs[i].fmt;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_format);
+
+struct v4l2_rect *
+__v4l2_subdev_state_get_crop(struct v4l2_subdev_state *state, unsigned int pad,
+ u32 stream)
+{
+ struct v4l2_subdev_stream_configs *stream_configs;
+ unsigned int i;
+
+ if (WARN_ON_ONCE(!state))
+ return NULL;
+
+ if (state->pads) {
+ if (stream)
+ return NULL;
+
+ if (pad >= state->sd->entity.num_pads)
+ return NULL;
+
+ return &state->pads[pad].crop;
+ }
+
+ lockdep_assert_held(state->lock);
+
+ stream_configs = &state->stream_configs;
+
+ for (i = 0; i < stream_configs->num_configs; ++i) {
+ if (stream_configs->configs[i].pad == pad &&
+ stream_configs->configs[i].stream == stream)
+ return &stream_configs->configs[i].crop;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_crop);
+
+struct v4l2_rect *
+__v4l2_subdev_state_get_compose(struct v4l2_subdev_state *state,
+ unsigned int pad, u32 stream)
+{
+ struct v4l2_subdev_stream_configs *stream_configs;
+ unsigned int i;
+
+ if (WARN_ON_ONCE(!state))
+ return NULL;
+
+ if (state->pads) {
+ if (stream)
+ return NULL;
+
+ if (pad >= state->sd->entity.num_pads)
+ return NULL;
+
+ return &state->pads[pad].compose;
+ }
+
+ lockdep_assert_held(state->lock);
+
+ stream_configs = &state->stream_configs;
+
+ for (i = 0; i < stream_configs->num_configs; ++i) {
+ if (stream_configs->configs[i].pad == pad &&
+ stream_configs->configs[i].stream == stream)
+ return &stream_configs->configs[i].compose;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_compose);
+
#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
static int
@@ -1670,108 +1772,6 @@ int v4l2_subdev_set_routing_with_fmt(struct v4l2_subdev *sd,
}
EXPORT_SYMBOL_GPL(v4l2_subdev_set_routing_with_fmt);
-struct v4l2_mbus_framefmt *
-__v4l2_subdev_state_get_format(struct v4l2_subdev_state *state,
- unsigned int pad, u32 stream)
-{
- struct v4l2_subdev_stream_configs *stream_configs;
- unsigned int i;
-
- if (WARN_ON_ONCE(!state))
- return NULL;
-
- if (state->pads) {
- if (stream)
- return NULL;
-
- if (pad >= state->sd->entity.num_pads)
- return NULL;
-
- return &state->pads[pad].format;
- }
-
- lockdep_assert_held(state->lock);
-
- stream_configs = &state->stream_configs;
-
- for (i = 0; i < stream_configs->num_configs; ++i) {
- if (stream_configs->configs[i].pad == pad &&
- stream_configs->configs[i].stream == stream)
- return &stream_configs->configs[i].fmt;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_format);
-
-struct v4l2_rect *
-__v4l2_subdev_state_get_crop(struct v4l2_subdev_state *state, unsigned int pad,
- u32 stream)
-{
- struct v4l2_subdev_stream_configs *stream_configs;
- unsigned int i;
-
- if (WARN_ON_ONCE(!state))
- return NULL;
-
- if (state->pads) {
- if (stream)
- return NULL;
-
- if (pad >= state->sd->entity.num_pads)
- return NULL;
-
- return &state->pads[pad].crop;
- }
-
- lockdep_assert_held(state->lock);
-
- stream_configs = &state->stream_configs;
-
- for (i = 0; i < stream_configs->num_configs; ++i) {
- if (stream_configs->configs[i].pad == pad &&
- stream_configs->configs[i].stream == stream)
- return &stream_configs->configs[i].crop;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_crop);
-
-struct v4l2_rect *
-__v4l2_subdev_state_get_compose(struct v4l2_subdev_state *state,
- unsigned int pad, u32 stream)
-{
- struct v4l2_subdev_stream_configs *stream_configs;
- unsigned int i;
-
- if (WARN_ON_ONCE(!state))
- return NULL;
-
- if (state->pads) {
- if (stream)
- return NULL;
-
- if (pad >= state->sd->entity.num_pads)
- return NULL;
-
- return &state->pads[pad].compose;
- }
-
- lockdep_assert_held(state->lock);
-
- stream_configs = &state->stream_configs;
-
- for (i = 0; i < stream_configs->num_configs; ++i) {
- if (stream_configs->configs[i].pad == pad &&
- stream_configs->configs[i].stream == stream)
- return &stream_configs->configs[i].compose;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL_GPL(__v4l2_subdev_state_get_compose);
-
int v4l2_subdev_routing_find_opposite_end(const struct v4l2_subdev_krouting *routing,
u32 pad, u32 stream, u32 *other_pad,
u32 *other_stream)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index b1bad946d813..33c8e5c93a3d 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -1393,70 +1393,6 @@ v4l2_subdev_lock_and_get_active_state(struct v4l2_subdev *sd)
return sd->active_state;
}
-#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
-
-/**
- * v4l2_subdev_get_fmt() - Fill format based on state
- * @sd: subdevice
- * @state: subdevice state
- * @format: pointer to &struct v4l2_subdev_format
- *
- * Fill @format->format field based on the information in the @format struct.
- *
- * This function can be used by the subdev drivers which support active state to
- * implement v4l2_subdev_pad_ops.get_fmt if the subdev driver does not need to
- * do anything special in their get_fmt op.
- *
- * Returns 0 on success, error value otherwise.
- */
-int v4l2_subdev_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *state,
- struct v4l2_subdev_format *format);
-
-/**
- * v4l2_subdev_set_routing() - Set given routing to subdev state
- * @sd: The subdevice
- * @state: The subdevice state
- * @routing: Routing that will be copied to subdev state
- *
- * This will release old routing table (if any) from the state, allocate
- * enough space for the given routing, and copy the routing.
- *
- * This can be used from the subdev driver's set_routing op, after validating
- * the routing.
- */
-int v4l2_subdev_set_routing(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *state,
- const struct v4l2_subdev_krouting *routing);
-
-struct v4l2_subdev_route *
-__v4l2_subdev_next_active_route(const struct v4l2_subdev_krouting *routing,
- struct v4l2_subdev_route *route);
-
-/**
- * for_each_active_route - iterate on all active routes of a routing table
- * @routing: The routing table
- * @route: The route iterator
- */
-#define for_each_active_route(routing, route) \
- for ((route) = NULL; \
- ((route) = __v4l2_subdev_next_active_route((routing), (route)));)
-
-/**
- * v4l2_subdev_set_routing_with_fmt() - Set given routing and format to subdev
- * state
- * @sd: The subdevice
- * @state: The subdevice state
- * @routing: Routing that will be copied to subdev state
- * @fmt: Format used to initialize all the streams
- *
- * This is the same as v4l2_subdev_set_routing, but additionally initializes
- * all the streams using the given format.
- */
-int v4l2_subdev_set_routing_with_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *state,
- const struct v4l2_subdev_krouting *routing,
- const struct v4l2_mbus_framefmt *fmt);
-
/*
* A macro to generate the macro or function name for sub-devices state access
* wrapper macros below.
@@ -1533,6 +1469,70 @@ struct v4l2_rect *
__v4l2_subdev_state_get_compose(struct v4l2_subdev_state *state,
unsigned int pad, u32 stream);
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+
+/**
+ * v4l2_subdev_get_fmt() - Fill format based on state
+ * @sd: subdevice
+ * @state: subdevice state
+ * @format: pointer to &struct v4l2_subdev_format
+ *
+ * Fill @format->format field based on the information in the @format struct.
+ *
+ * This function can be used by the subdev drivers which support active state to
+ * implement v4l2_subdev_pad_ops.get_fmt if the subdev driver does not need to
+ * do anything special in their get_fmt op.
+ *
+ * Returns 0 on success, error value otherwise.
+ */
+int v4l2_subdev_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format);
+
+/**
+ * v4l2_subdev_set_routing() - Set given routing to subdev state
+ * @sd: The subdevice
+ * @state: The subdevice state
+ * @routing: Routing that will be copied to subdev state
+ *
+ * This will release old routing table (if any) from the state, allocate
+ * enough space for the given routing, and copy the routing.
+ *
+ * This can be used from the subdev driver's set_routing op, after validating
+ * the routing.
+ */
+int v4l2_subdev_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ const struct v4l2_subdev_krouting *routing);
+
+struct v4l2_subdev_route *
+__v4l2_subdev_next_active_route(const struct v4l2_subdev_krouting *routing,
+ struct v4l2_subdev_route *route);
+
+/**
+ * for_each_active_route - iterate on all active routes of a routing table
+ * @routing: The routing table
+ * @route: The route iterator
+ */
+#define for_each_active_route(routing, route) \
+ for ((route) = NULL; \
+ ((route) = __v4l2_subdev_next_active_route((routing), (route)));)
+
+/**
+ * v4l2_subdev_set_routing_with_fmt() - Set given routing and format to subdev
+ * state
+ * @sd: The subdevice
+ * @state: The subdevice state
+ * @routing: Routing that will be copied to subdev state
+ * @fmt: Format used to initialize all the streams
+ *
+ * This is the same as v4l2_subdev_set_routing, but additionally initializes
+ * all the streams using the given format.
+ */
+int v4l2_subdev_set_routing_with_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ const struct v4l2_subdev_krouting *routing,
+ const struct v4l2_mbus_framefmt *fmt);
+
/**
* v4l2_subdev_routing_find_opposite_end() - Find the opposite stream
* @routing: routing used to find the opposite side
--
2.39.2
next reply other threads:[~2023-11-10 17:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-10 10:10 Sakari Ailus [this message]
2023-11-10 15:39 ` [PATCH 1/1] media: v4l: subdev: Always compile sub-device state access functions Laurent Pinchart
2023-11-10 21:15 ` Sakari Ailus
2023-11-12 1:22 ` Laurent Pinchart
2023-11-12 20:32 ` Sakari Ailus
2023-11-13 1:23 ` Laurent Pinchart
2023-11-13 7:08 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231110101049.890577-1-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox