Re: [PATCH v2 1/1] media: nxp: imx8-isi-debug: Add missing 36-Bit DMA registers to debugfs output

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Alexander,

Thank you for the patch.

On Thu, Dec 07, 2023 at 12:09:18PM +0100, Alexander Stein wrote:
> The extended address registers are missing in the debug output register
> list. These are only available on 36-Bit DMA platforms. Due to the
> prolonged name, the output width has to be adjusted as well.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> Changes in v2:
> * Split register set into regular and 36-Bit DMA only
> * Adjust output width to address longer register names
> 
> Currently only tested on TQMa8MPxL (imx8mp-tqma8mpql-mba8mpxl.dts)
> 
>  .../platform/nxp/imx8-isi/imx8-isi-debug.c    | 28 +++++++++++++++++--
>  1 file changed, 25 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-debug.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-debug.c
> index 6709ab7ea1f3..398864b5e506 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-debug.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-debug.c
> @@ -22,10 +22,11 @@ static inline u32 mxc_isi_read(struct mxc_isi_pipe *pipe, u32 reg)
>  static int mxc_isi_debug_dump_regs_show(struct seq_file *m, void *p)
>  {
>  #define MXC_ISI_DEBUG_REG(name)		{ name, #name }
> -	static const struct {
> +	struct debug_regs {
>  		u32 offset;
>  		const char * const name;
> -	} registers[] = {
> +	};
> +	static const struct debug_regs registers[] = {
>  		MXC_ISI_DEBUG_REG(CHNL_CTRL),
>  		MXC_ISI_DEBUG_REG(CHNL_IMG_CTRL),
>  		MXC_ISI_DEBUG_REG(CHNL_OUT_BUF_CTRL),
> @@ -67,6 +68,16 @@ static int mxc_isi_debug_dump_regs_show(struct seq_file *m, void *p)
>  		MXC_ISI_DEBUG_REG(CHNL_SCL_IMG_CFG),
>  		MXC_ISI_DEBUG_REG(CHNL_FLOW_CTRL),
>  	};
> +	/* There registers contain the upper 4Bits of 36-Bit DMA addresses */

s/There/These/

> +	static const struct debug_regs registers_36bit_dma[] = {
> +		MXC_ISI_DEBUG_REG(CHNL_Y_BUF1_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_U_BUF1_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_V_BUF1_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_Y_BUF2_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_U_BUF2_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_V_BUF2_XTND_ADDR),
> +		MXC_ISI_DEBUG_REG(CHNL_IN_BUF_XTND_ADDR),
> +	};
>  
>  	struct mxc_isi_pipe *pipe = m->private;
>  	unsigned int i;
> @@ -77,10 +88,21 @@ static int mxc_isi_debug_dump_regs_show(struct seq_file *m, void *p)
>  	seq_printf(m, "--- ISI pipe %u registers ---\n", pipe->id);
>  
>  	for (i = 0; i < ARRAY_SIZE(registers); ++i)
> -		seq_printf(m, "%20s[0x%02x]: 0x%08x\n",
> +		seq_printf(m, "%21s[0x%02x]: 0x%08x\n",
>  			   registers[i].name, registers[i].offset,
>  			   mxc_isi_read(pipe, registers[i].offset));
>  
> +	if (pipe->isi->pdata->has_36bit_dma) {
> +		for (i = 0; i < ARRAY_SIZE(registers_36bit_dma); ++i) {
> +			const struct debug_regs *reg = &registers_36bit_dma[i];
> +
> +			seq_printf(m, "%21s[0x%02x]: 0x%08x\n",
> +				reg->name,
> +				reg->offset,
> +				mxc_isi_read(pipe, reg->offset));

Lines should be aligned under the "m" of the first line.

I'll fix these small issues when applying, no need to send a v3.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +		}
> +	}
> +
>  	pm_runtime_put(pipe->isi->dev);
>  
>  	return 0;

-- 
Regards,

Laurent Pinchart