From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: linux-media@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
David Plowman <david.plowman@raspberrypi.com>,
Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Naushir Patuck <naush@raspberrypi.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
kernel-list@raspberrypi.com,
linux-rpi-kernel@lists.infradead.org,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH v6 04/15] media: i2c: imx219: Report streams using frame descriptors
Date: Mon, 4 Mar 2024 17:16:54 +0200 [thread overview]
Message-ID: <20240304151654.GC21608@pendragon.ideasonboard.com> (raw)
In-Reply-To: <tu2zcb4hwltzs3dggtzdcbj23dyofesknge6rx6hzhwdu22que@3ckcwhvkbaf7>
On Mon, Mar 04, 2024 at 10:33:37AM +0100, Jacopo Mondi wrote:
> Hi Laurent
>
> On Fri, Mar 01, 2024 at 11:32:19PM +0200, Laurent Pinchart wrote:
> > Implement the .get_frame_desc() subdev operation to report information
> > about streams to the connected CSI-2 receiver. This is required to let
> > the CSI-2 receiver driver know about virtual channels and data types for
> > each stream.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > drivers/media/i2c/imx219.c | 67 ++++++++++++++++++++++++++++----------
> > 1 file changed, 50 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> > index 52afb821f667..6e0232b6772b 100644
> > --- a/drivers/media/i2c/imx219.c
> > +++ b/drivers/media/i2c/imx219.c
> > @@ -23,6 +23,7 @@
> > #include <linux/pm_runtime.h>
> > #include <linux/regulator/consumer.h>
> >
> > +#include <media/mipi-csi2.h>
> > #include <media/v4l2-cci.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > @@ -594,6 +595,24 @@ static void imx219_free_controls(struct imx219 *imx219)
> > * Subdev operations
> > */
> >
> > +static int imx219_format_bpp(u32 code)
>
> This can be unsigned as the functions does not return errrors
I'll change that.
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
>
> > +{
> > + switch (code) {
> > + case MEDIA_BUS_FMT_SRGGB8_1X8:
> > + case MEDIA_BUS_FMT_SGRBG8_1X8:
> > + case MEDIA_BUS_FMT_SGBRG8_1X8:
> > + case MEDIA_BUS_FMT_SBGGR8_1X8:
> > + return 8;
> > +
> > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > + case MEDIA_BUS_FMT_SGRBG10_1X10:
> > + case MEDIA_BUS_FMT_SGBRG10_1X10:
> > + case MEDIA_BUS_FMT_SBGGR10_1X10:
> > + default:
> > + return 10;
> > + }
> > +}
> > +
> > static int imx219_set_framefmt(struct imx219 *imx219,
> > struct v4l2_subdev_state *state)
> > {
> > @@ -605,23 +624,7 @@ static int imx219_set_framefmt(struct imx219 *imx219,
> >
> > format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE);
> > crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE);
> > -
> > - switch (format->code) {
> > - case MEDIA_BUS_FMT_SRGGB8_1X8:
> > - case MEDIA_BUS_FMT_SGRBG8_1X8:
> > - case MEDIA_BUS_FMT_SGBRG8_1X8:
> > - case MEDIA_BUS_FMT_SBGGR8_1X8:
> > - bpp = 8;
> > - break;
> > -
> > - case MEDIA_BUS_FMT_SRGGB10_1X10:
> > - case MEDIA_BUS_FMT_SGRBG10_1X10:
> > - case MEDIA_BUS_FMT_SGBRG10_1X10:
> > - case MEDIA_BUS_FMT_SBGGR10_1X10:
> > - default:
> > - bpp = 10;
> > - break;
> > - }
> > + bpp = imx219_format_bpp(format->code);
> >
> > cci_write(imx219->regmap, IMX219_REG_X_ADD_STA_A,
> > crop->left - IMX219_PIXEL_ARRAY_LEFT, &ret);
> > @@ -1031,6 +1034,35 @@ static int imx219_init_state(struct v4l2_subdev *sd,
> > return 0;
> > }
> >
> > +static int imx219_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> > + struct v4l2_mbus_frame_desc *fd)
> > +{
> > + const struct v4l2_mbus_framefmt *fmt;
> > + struct v4l2_subdev_state *state;
> > + u32 code;
> > +
> > + if (pad != IMX219_PAD_SOURCE)
> > + return -EINVAL;
> > +
> > + state = v4l2_subdev_lock_and_get_active_state(sd);
> > + fmt = v4l2_subdev_state_get_stream_format(state, IMX219_PAD_SOURCE, 0);
> > + code = fmt->code;
> > + v4l2_subdev_unlock_state(state);
> > +
> > + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> > + fd->num_entries = 1;
> > +
> > + memset(fd->entry, 0, sizeof(fd->entry));
> > +
> > + fd->entry[0].pixelcode = code;
> > + fd->entry[0].stream = 0;
> > + fd->entry[0].bus.csi2.vc = 0;
> > + fd->entry[0].bus.csi2.dt = imx219_format_bpp(code) == 8
> > + ? MIPI_CSI2_DT_RAW8 : MIPI_CSI2_DT_RAW10;
> > +
> > + return 0;
> > +}
> > +
> > static const struct v4l2_subdev_core_ops imx219_core_ops = {
> > .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> > @@ -1046,6 +1078,7 @@ static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> > .set_fmt = imx219_set_pad_format,
> > .get_selection = imx219_get_selection,
> > .enum_frame_size = imx219_enum_frame_size,
> > + .get_frame_desc = imx219_get_frame_desc,
> > };
> >
> > static const struct v4l2_subdev_ops imx219_subdev_ops = {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-03-04 15:16 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 21:32 [PATCH 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 01/15] media: i2c: imx219: Inline imx219_update_pad_format() in its caller Laurent Pinchart
2024-03-04 8:45 ` Jacopo Mondi
2024-03-05 16:01 ` Dave Stevenson
2024-03-01 21:32 ` [PATCH v6 02/15] media: i2c: imx219: Add internal image sink pad Laurent Pinchart
2024-03-04 9:13 ` Jacopo Mondi
2024-03-04 9:38 ` Jacopo Mondi
2024-03-04 15:14 ` Laurent Pinchart
2024-03-04 15:57 ` Jacopo Mondi
2024-03-01 21:32 ` [PATCH v6 03/15] media: i2c: imx219: Report internal routes to userspace Laurent Pinchart
2024-03-04 9:30 ` Jacopo Mondi
2024-03-04 12:22 ` Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 04/15] media: i2c: imx219: Report streams using frame descriptors Laurent Pinchart
2024-03-04 9:33 ` Jacopo Mondi
2024-03-04 15:16 ` Laurent Pinchart [this message]
2024-03-01 21:32 ` [PATCH v6 05/15] media: i2c: imx219: Add embedded data support Laurent Pinchart
2024-03-04 9:47 ` Jacopo Mondi
2024-03-04 17:22 ` Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 06/15] media: v4l: Add V4L2-PIX-FMT-Y12P format Laurent Pinchart
2024-03-04 11:11 ` Jacopo Mondi
2024-03-04 19:08 ` Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 07/15] media: v4l: Add V4L2-PIX-FMT-Y14P format Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 08/15] dt-bindings: media: Add bindings for bcm2835-unicam Laurent Pinchart
2024-03-25 18:28 ` Sakari Ailus
2024-03-25 23:02 ` Laurent Pinchart
2024-03-26 22:11 ` Sakari Ailus
2024-03-01 21:32 ` [PATCH v6 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Laurent Pinchart
2024-03-04 17:12 ` Jacopo Mondi
2024-03-04 19:51 ` Laurent Pinchart
2024-03-05 14:56 ` Dave Stevenson
2024-03-16 23:54 ` Laurent Pinchart
2024-03-05 14:15 ` Dave Stevenson
2024-03-16 22:36 ` Laurent Pinchart
2024-03-20 12:30 ` Naushir Patuck
2024-03-21 19:57 ` Laurent Pinchart
2024-03-22 8:40 ` Jean-Michel Hautbois
2024-03-25 18:36 ` Sakari Ailus
2024-03-26 1:37 ` Laurent Pinchart
2024-03-26 1:50 ` Laurent Pinchart
2024-03-26 22:23 ` Sakari Ailus
2024-03-26 15:23 ` Dave Stevenson
2024-03-26 16:42 ` Laurent Pinchart
2024-03-26 17:01 ` Dave Stevenson
2024-03-01 21:32 ` [PATCH v6 10/15] ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835 Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 11/15] ARM: dts: bcm2835: Add Unicam CSI nodes Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 12/15] ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 Laurent Pinchart
2024-03-18 14:56 ` Dave Stevenson
2024-03-18 19:25 ` Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 13/15] ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 Laurent Pinchart
2024-03-18 14:56 ` Dave Stevenson
2024-03-18 19:24 ` Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 14/15] ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator Laurent Pinchart
2024-03-01 21:32 ` [PATCH v6 15/15] [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera Laurent Pinchart
2024-03-01 21:38 ` [PATCH 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Laurent Pinchart
2024-03-15 14:02 ` Florian Fainelli
2024-03-16 20:06 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240304151654.GC21608@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=david.plowman@raspberrypi.com \
--cc=florian.fainelli@broadcom.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo.mondi@ideasonboard.com \
--cc=jeanmichel.hautbois@ideasonboard.com \
--cc=kernel-list@raspberrypi.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=naush@raspberrypi.com \
--cc=rjui@broadcom.com \
--cc=sakari.ailus@linux.intel.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox