[PATCH v3 0/4] CAMSS support for MSM8939

[PATCH v3 0/4] CAMSS support for MSM8939

[Vincent Knecht via B4 Relay]

This series adds CAMSS support for MSM8939.
It's mostly identical to MSM8916, except for some clocks
and an additional CSI.

To fix black stripes across sensor output, and garbage in
CSID TPG output, 2 VFE VBIF register settings are needed.
So the 1st patch adds helper functions to do just that.

Patch 1: adds helper for VFE VBIF settings
Patch 2: adds CAMSS_8x39 version in CAMSS driver
Patch 3: documents qcom,msm8939-camss DT bindings
Patch 4: adds camss and cci in msm8939.dtsi

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
Changes in v3:
- Patch 1:
  - Use braces around multiline (Bryan)
  - Rename vfe_vbif_reg_write to vfe_vbif_write_reg (Bryan)
  - Get rid of switch block on CAMSS version (Bryan)
- Patch 2:
  - Get rid of switch block on CAMSS version (Bryan)
- Patch 3: no change
- Patch 4: no change
  - Tried to get rid of CCI camss_ahb but this resulted in device
    freeze+reboot (Konrad)
- Link to v2: https://lore.kernel.org/r/20250525-camss-8x39-vbif-v2-0-6d3d5c5af456@mailoo.org

Changes in v2:
- Patch 1:
  - Fix devm_platform_ioremap_resource_byname line to not end with
    opening parenthesis (media-ci/1-checkpatch)
  - Move camss-vfe-4-1.c handling of VBIF previously in patch 2 here
    (Dmitry)
- Patch 2:
  - Declare regulators in PHY entries, not CSID ones (Bryan)
- Patch 3: (bindings)
  - Fix bindings checks for new errors (Rob)
  - Fix properties ordering, code-style and example (Krzysztof)
  - Sort reg-names, clock-names and interrupt-names alphanumerically (Bryan)
- Patch 4: (dtsi)
  - Move #address/#size cells before status (Konrad)
  - Aligned CCI with msm8916, thus removing ispif_ahb mention (Konrad)
    If "camss_ahb should be unnecessary", it's still required by qcom,i2c-cci.yaml
- Link to v1: https://lore.kernel.org/r/20250520-camss-8x39-vbif-v1-0-a12cd6006af9@mailoo.org

---
Vincent Knecht (4):
      media: qcom: camss: vfe: Add VBIF setting support
      media: qcom: camss: Add support for MSM8939
      media: dt-bindings: Add qcom,msm8939-camss
      arm64: dts: qcom: msm8939: Add camss and cci

 .../bindings/media/qcom,msm8939-camss.yaml         | 253 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi       |   4 +
 arch/arm64/boot/dts/qcom/msm8939.dtsi              | 146 ++++++++++++
 drivers/media/platform/qcom/camss/Makefile         |   1 +
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-ispif.c    |   8 +-
 drivers/media/platform/qcom/camss/camss-vfe-4-1.c  |  12 +
 drivers/media/platform/qcom/camss/camss-vfe-vbif.c |  31 +++
 drivers/media/platform/qcom/camss/camss-vfe-vbif.h |  19 ++
 drivers/media/platform/qcom/camss/camss-vfe.c      |  10 +
 drivers/media/platform/qcom/camss/camss-vfe.h      |   3 +
 drivers/media/platform/qcom/camss/camss.c          | 157 +++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 13 files changed, 644 insertions(+), 2 deletions(-)
---
base-commit: 8566fc3b96539e3235909d6bdda198e1282beaed
change-id: 20250517-camss-8x39-vbif-975ff5819198

Best regards,
-- 
Vincent Knecht <vincent.knecht@mailoo.org>

[PATCH v3 1/4] media: qcom: camss: vfe: Add VBIF setting support

[Vincent Knecht via B4 Relay]

From: Vincent Knecht <vincent.knecht@mailoo.org>

Some devices need writing values to VFE VBIF registers.
Add helper functions to do this.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 drivers/media/platform/qcom/camss/Makefile         |  1 +
 drivers/media/platform/qcom/camss/camss-vfe-4-1.c  | 12 +++++++++++
 drivers/media/platform/qcom/camss/camss-vfe-vbif.c | 25 ++++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-vfe-vbif.h | 19 ++++++++++++++++
 drivers/media/platform/qcom/camss/camss-vfe.c      |  9 ++++++++
 drivers/media/platform/qcom/camss/camss-vfe.h      |  3 +++
 6 files changed, 69 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index d26a9c24a430a831e0d865db4d96142da5276653..4c66d29ae505ae5adc717ae98f77fb736a6e15b9 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -21,6 +21,7 @@ qcom-camss-objs += \
 		camss-vfe-680.o \
 		camss-vfe-780.o \
 		camss-vfe-gen1.o \
+		camss-vfe-vbif.o \
 		camss-vfe.o \
 		camss-video.o \
 		camss-format.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index 901677293d971cf761944a660ef719af38203f22..9cf1ccdb2fe7ca9bf89b746af836e1035b457a8f 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -15,6 +15,7 @@
 #include "camss.h"
 #include "camss-vfe.h"
 #include "camss-vfe-gen1.h"
+#include "camss-vfe-vbif.h"
 
 #define VFE_0_HW_VERSION		0x000
 
@@ -733,6 +734,7 @@ static void vfe_set_qos(struct vfe_device *vfe)
 {
 	u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
 	u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
+	int ret;
 
 	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
 	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
@@ -742,6 +744,16 @@ static void vfe_set_qos(struct vfe_device *vfe)
 	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
 	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
 	writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
+
+	/* SoC-specific VBIF settings */
+	if (vfe->res->has_vbif) {
+		ret = vfe_vbif_apply_settings(vfe);
+		if (ret < 0) {
+			dev_err_ratelimited(vfe->camss->dev,
+					    "VFE: VBIF error %d\n",
+					    ret);
+		}
+	}
 }
 
 static void vfe_set_ds(struct vfe_device *vfe)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-vbif.c b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
new file mode 100644
index 0000000000000000000000000000000000000000..691335f231a6001e6c535431a18b2e21ddc832c9
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * camss-vfe-vbif.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE VBIF Module
+ *
+ * Copyright (c) 2025, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/io.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+#include "camss-vfe-vbif.h"
+
+void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val)
+{
+	writel_relaxed(val, vfe->vbif_base + reg);
+}
+
+int vfe_vbif_apply_settings(struct vfe_device *vfe)
+{
+	return 0;
+}
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-vbif.h b/drivers/media/platform/qcom/camss/camss-vfe-vbif.h
new file mode 100644
index 0000000000000000000000000000000000000000..502db629e961f67723b14a7c8c9ca973fe4c267c
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-vbif.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * camss-vfe-vbif.h
+ *
+ * Qualcomm MSM Camera Subsystem - VFE VBIF Module
+ *
+ * Copyright (c) 2025, The Linux Foundation. All rights reserved.
+ *
+ */
+#ifndef QC_MSM_CAMSS_VFE_VBIF_H
+#define QC_MSM_CAMSS_VFE_VBIF_H
+
+#include "camss-vfe.h"
+
+void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val);
+
+int vfe_vbif_apply_settings(struct vfe_device *vfe);
+
+#endif /* QC_MSM_CAMSS_VFE_VBIF_H */
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 4bca6c3abaff9b898ea879674a3ff8f3592d3139..3138562d399444c5cf2ae96bf16b75b85ff5c5ca 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -1807,6 +1807,15 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 		return PTR_ERR(vfe->base);
 	}
 
+	if (vfe->res->has_vbif) {
+		vfe->vbif_base = devm_platform_ioremap_resource_byname(pdev,
+					vfe->res->vbif_name);
+		if (IS_ERR(vfe->vbif_base)) {
+			dev_err(dev, "could not map vbif memory\n");
+			return PTR_ERR(vfe->vbif_base);
+		}
+	}
+
 	/* Interrupt */
 
 	ret = platform_get_irq_byname(pdev, res->interrupt[0]);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index a23f666be7531e0366c73faea44ed245e7a8e30f..614e932c33da78e02e0800ce6534af7b14822f83 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -136,6 +136,8 @@ struct vfe_subdev_resources {
 	u8 line_num;
 	bool has_pd;
 	char *pd_name;
+	bool has_vbif;
+	char *vbif_name;
 	const struct vfe_hw_ops *hw_ops;
 	const struct camss_formats *formats_rdi;
 	const struct camss_formats *formats_pix;
@@ -145,6 +147,7 @@ struct vfe_device {
 	struct camss *camss;
 	u8 id;
 	void __iomem *base;
+	void __iomem *vbif_base;
 	u32 irq;
 	char irq_name[30];
 	struct camss_clock *clock;

-- 
2.49.0

[PATCH v3 2/4] media: qcom: camss: Add support for MSM8939

[Vincent Knecht via B4 Relay]

From: Vincent Knecht <vincent.knecht@mailoo.org>

The camera subsystem for the MSM8939 is the same as MSM8916 except with
3 CSID instead of 2, and some higher clock rates.

As a quirk, this SoC needs writing values to 2 VFE VBIF registers
(see downstream msm8939-camera.dtsi vbif-{regs,settings} properties).
This fixes black stripes across sensor and garbage in CSID TPG outputs.

Add support for the MSM8939 camera subsystem.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-ispif.c    |   8 +-
 drivers/media/platform/qcom/camss/camss-vfe-vbif.c |   6 +
 drivers/media/platform/qcom/camss/camss-vfe.c      |   1 +
 drivers/media/platform/qcom/camss/camss.c          | 157 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 6 files changed, 172 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index c622efcc92ff3781d7fc3ace0253c2d64c91e847..6311fc2975aa1345e430a477c8a6476f1d7e5663 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -605,6 +605,7 @@ int msm_csiphy_subdev_init(struct camss *camss,
 		return PTR_ERR(csiphy->base);
 
 	if (camss->res->version == CAMSS_8x16 ||
+	    camss->res->version == CAMSS_8x39 ||
 	    camss->res->version == CAMSS_8x53 ||
 	    camss->res->version == CAMSS_8x96) {
 		csiphy->base_clk_mux =
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index 2dc585c6123dd248a5bacd9c7a88cb5375644311..aaf3caa42d33dcb641651e7f5bc0c2a564d85bfa 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -1112,6 +1112,8 @@ int msm_ispif_subdev_init(struct camss *camss,
 	/* Number of ISPIF lines - same as number of CSID hardware modules */
 	if (camss->res->version == CAMSS_8x16)
 		ispif->line_num = 2;
+	else if (camss->res->version == CAMSS_8x39)
+		ispif->line_num = 3;
 	else if (camss->res->version == CAMSS_8x96 ||
 		 camss->res->version == CAMSS_8x53 ||
 		 camss->res->version == CAMSS_660)
@@ -1128,7 +1130,8 @@ int msm_ispif_subdev_init(struct camss *camss,
 		ispif->line[i].ispif = ispif;
 		ispif->line[i].id = i;
 
-		if (camss->res->version == CAMSS_8x16) {
+		if (camss->res->version == CAMSS_8x16 ||
+		    camss->res->version == CAMSS_8x39) {
 			ispif->line[i].formats = ispif_formats_8x16;
 			ispif->line[i].nformats =
 					ARRAY_SIZE(ispif_formats_8x16);
@@ -1162,7 +1165,8 @@ int msm_ispif_subdev_init(struct camss *camss,
 	ispif->irq = ret;
 	snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
 		 dev_name(dev), MSM_ISPIF_NAME);
-	if (camss->res->version == CAMSS_8x16)
+	if (camss->res->version == CAMSS_8x16 ||
+	    camss->res->version == CAMSS_8x39)
 		ret = devm_request_irq(dev, ispif->irq, ispif_isr_8x16,
 			       IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
 	else if (camss->res->version == CAMSS_8x96 ||
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-vbif.c b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
index 691335f231a6001e6c535431a18b2e21ddc832c9..911f8da02f1fbb500ab9564978e2b0dddf93e84e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
@@ -14,6 +14,9 @@
 #include "camss-vfe.h"
 #include "camss-vfe-vbif.h"
 
+#define VBIF_FIXED_SORT_EN	0x30
+#define VBIF_FIXED_SORT_SEL0	0x34
+
 void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val)
 {
 	writel_relaxed(val, vfe->vbif_base + reg);
@@ -21,5 +24,8 @@ void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val)
 
 int vfe_vbif_apply_settings(struct vfe_device *vfe)
 {
+	vfe_vbif_write_reg(vfe, VBIF_FIXED_SORT_EN, 0xfff);
+	vfe_vbif_write_reg(vfe, VBIF_FIXED_SORT_SEL0, 0x555000);
+
 	return 0;
 }
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 3138562d399444c5cf2ae96bf16b75b85ff5c5ca..ac3a9579e3e6910eee8c1ec11c4fff6e1bc94443 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -290,6 +290,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 
 	switch (vfe->camss->res->version) {
 	case CAMSS_8x16:
+	case CAMSS_8x39:
 	case CAMSS_8x53:
 		switch (sink_code) {
 		case MEDIA_BUS_FMT_YUYV8_1X16:
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 06f42875702f02f9d8d83d06ddaa972eacb593f8..6a68876a00a8d6eaf3ef55e8fde0d266f567879a 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -154,6 +154,149 @@ static const struct camss_subdev_resources vfe_res_8x16[] = {
 	}
 };
 
+static const struct camss_subdev_resources csiphy_res_8x39[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = { "vdda" },
+		.clock = { "top_ahb", "ispif_ahb", "ahb", "csiphy0_timer" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 0 },
+				{ 100000000, 200000000 } },
+		.reg = { "csiphy0", "csiphy0_clk_mux" },
+		.interrupt = { "csiphy0" },
+		.csiphy = {
+			.id = 0,
+			.hw_ops = &csiphy_ops_2ph_1_0,
+			.formats = &csiphy_formats_8x16
+		}
+	},
+
+	/* CSIPHY1 */
+	{
+		.regulators = { "vdda" },
+		.clock = { "top_ahb", "ispif_ahb", "ahb", "csiphy1_timer" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 0 },
+				{ 100000000, 200000000 } },
+		.reg = { "csiphy1", "csiphy1_clk_mux" },
+		.interrupt = { "csiphy1" },
+		.csiphy = {
+			.id = 1,
+			.hw_ops = &csiphy_ops_2ph_1_0,
+			.formats = &csiphy_formats_8x16
+		}
+	}
+};
+
+static const struct camss_subdev_resources csid_res_8x39[] = {
+	/* CSID0 */
+	{
+		.regulators = {},
+		.clock = { "top_ahb", "ispif_ahb", "csi0_ahb", "ahb",
+			   "csi0", "csi0_phy", "csi0_pix", "csi0_rdi" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 200000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid0" },
+		.interrupt = { "csid0" },
+		.csid = {
+			.hw_ops = &csid_ops_4_1,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_4_1
+		}
+	},
+
+	/* CSID1 */
+	{
+		.regulators = {},
+		.clock = { "top_ahb", "ispif_ahb", "csi1_ahb", "ahb",
+			   "csi1", "csi1_phy", "csi1_pix", "csi1_rdi" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 200000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid1" },
+		.interrupt = { "csid1" },
+		.csid = {
+			.hw_ops = &csid_ops_4_1,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_4_1
+		}
+	},
+
+	/* CSID2 */
+	{
+		.regulators = {},
+		.clock = { "top_ahb", "ispif_ahb", "csi2_ahb", "ahb",
+			   "csi2", "csi2_phy", "csi2_pix", "csi2_rdi" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 200000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid2" },
+		.interrupt = { "csid2" },
+		.csid = {
+			.hw_ops = &csid_ops_4_1,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_4_1
+		}
+	},
+};
+
+static const struct camss_subdev_resources ispif_res_8x39 = {
+	/* ISPIF */
+	.clock = { "top_ahb", "ispif_ahb", "ahb",
+		   "csi0", "csi0_pix", "csi0_rdi",
+		   "csi1", "csi1_pix", "csi1_rdi",
+		   "csi2", "csi2_pix", "csi2_rdi" },
+	.clock_for_reset = { "vfe0", "csi_vfe0" },
+	.reg = { "ispif", "csi_clk_mux" },
+	.interrupt = { "ispif" },
+};
+
+static const struct camss_subdev_resources vfe_res_8x39[] = {
+	/* VFE0 */
+	{
+		.regulators = {},
+		.clock = { "top_ahb", "ispif_ahb", "vfe0", "csi_vfe0",
+			   "vfe_ahb", "vfe_axi", "ahb" },
+		.clock_rate = { { 0 },
+				{ 40000000, 80000000 },
+				{ 50000000, 80000000, 100000000, 160000000,
+				  177780000, 200000000, 266670000, 320000000,
+				  400000000, 465000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.vfe = {
+			.line_num = 3,
+			.has_vbif = true,
+			.vbif_name = "vfe0_vbif",
+			.hw_ops = &vfe_ops_4_1,
+			.formats_rdi = &vfe_formats_rdi_8x16,
+			.formats_pix = &vfe_formats_pix_8x16
+		}
+	}
+};
+
 static const struct camss_subdev_resources csid_res_8x53[] = {
 	/* CSID0 */
 	{
@@ -3585,6 +3728,7 @@ static int camss_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	if (camss->res->version == CAMSS_8x16 ||
+	    camss->res->version == CAMSS_8x39 ||
 	    camss->res->version == CAMSS_8x53 ||
 	    camss->res->version == CAMSS_8x96) {
 		camss->ispif = devm_kcalloc(dev, 1, sizeof(*camss->ispif), GFP_KERNEL);
@@ -3727,6 +3871,18 @@ static const struct camss_resources msm8916_resources = {
 	.link_entities = camss_link_entities
 };
 
+static const struct camss_resources msm8939_resources = {
+	.version = CAMSS_8x39,
+	.csiphy_res = csiphy_res_8x39,
+	.csid_res = csid_res_8x39,
+	.ispif_res = &ispif_res_8x39,
+	.vfe_res = vfe_res_8x39,
+	.csiphy_num = ARRAY_SIZE(csiphy_res_8x39),
+	.csid_num = ARRAY_SIZE(csid_res_8x39),
+	.vfe_num = ARRAY_SIZE(vfe_res_8x39),
+	.link_entities = camss_link_entities
+};
+
 static const struct camss_resources msm8953_resources = {
 	.version = CAMSS_8x53,
 	.icc_res = icc_res_8x53,
@@ -3863,6 +4019,7 @@ static const struct camss_resources x1e80100_resources = {
 
 static const struct of_device_id camss_dt_match[] = {
 	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
+	{ .compatible = "qcom,msm8939-camss", .data = &msm8939_resources },
 	{ .compatible = "qcom,msm8953-camss", .data = &msm8953_resources },
 	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
 	{ .compatible = "qcom,sc7280-camss", .data = &sc7280_resources },
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 63c0afee154a02194820016ccf554620d6521c8b..be11cf3af478627fa48827e70d5f0673939e1e63 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -80,6 +80,7 @@ enum camss_version {
 	CAMSS_660,
 	CAMSS_7280,
 	CAMSS_8x16,
+	CAMSS_8x39,
 	CAMSS_8x53,
 	CAMSS_8x96,
 	CAMSS_8250,

-- 
2.49.0

[PATCH v3 3/4] media: dt-bindings: Add qcom,msm8939-camss

[Vincent Knecht via B4 Relay]

From: Vincent Knecht <vincent.knecht@mailoo.org>

Add bindings for qcom,msm8939-camss in order to support the camera
subsystem for MSM8939.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 .../bindings/media/qcom,msm8939-camss.yaml         | 253 +++++++++++++++++++++
 1 file changed, 253 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..592b847433d7a788d8c1635129dd408cb0112073
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8939-camss
+
+  reg:
+    maxItems: 11
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csi_clk_mux
+      - const: ispif
+      - const: vfe0
+      - const: vfe0_vbif
+
+  clocks:
+    maxItems: 24
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: csi0
+      - const: csi0_ahb
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1
+      - const: csi1_ahb
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2
+      - const: csi2_ahb
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csi_vfe0
+      - const: ispif_ahb
+      - const: top_ahb
+      - const: vfe0
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    maxItems: 7
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: ispif
+      - const: vfe0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - vdda-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8939.h>
+
+    isp@1b08000 {
+        compatible = "qcom,msm8939-camss";
+
+        reg = <0x01b08000 0x100>,
+              <0x01b08400 0x100>,
+              <0x01b08800 0x100>,
+              <0x01b0ac00 0x200>,
+              <0x01b00030 0x4>,
+              <0x01b0b000 0x200>,
+              <0x01b00038 0x4>,
+              <0x01b00020 0x10>,
+              <0x01b0a000 0x500>,
+              <0x01b10000 0x1000>,
+              <0x01b40000 0x200>;
+
+        reg-names = "csid0",
+                    "csid1",
+                    "csid2",
+                    "csiphy0",
+                    "csiphy0_clk_mux",
+                    "csiphy1",
+                    "csiphy1_clk_mux",
+                    "csi_clk_mux",
+                    "ispif",
+                    "vfe0",
+                    "vfe0_vbif";
+
+        clocks = <&gcc GCC_CAMSS_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI2RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+                 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+        clock-names = "ahb",
+                      "csi0",
+                      "csi0_ahb",
+                      "csi0_phy",
+                      "csi0_pix",
+                      "csi0_rdi",
+                      "csi1",
+                      "csi1_ahb",
+                      "csi1_phy",
+                      "csi1_pix",
+                      "csi1_rdi",
+                      "csi2",
+                      "csi2_ahb",
+                      "csi2_phy",
+                      "csi2_pix",
+                      "csi2_rdi",
+                      "csiphy0_timer",
+                      "csiphy1_timer",
+                      "csi_vfe0",
+                      "ispif_ahb",
+                      "top_ahb",
+                      "vfe0",
+                      "vfe_ahb",
+                      "vfe_axi";
+
+        interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "csid0",
+                          "csid1",
+                          "csid2",
+                          "csiphy0",
+                          "csiphy1",
+                          "ispif",
+                          "vfe0";
+
+        iommus = <&apps_iommu 3>;
+
+        power-domains = <&gcc VFE_GDSC>;
+
+        vdda-supply = <&reg_2v8>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@1 {
+                reg = <1>;
+                csiphy1_ep: endpoint {
+                    clock-lanes = <1>;
+                    data-lanes = <0 2>;
+                    remote-endpoint = <&sensor_ep>;
+                };
+            };
+        };
+    };

-- 
2.49.0

[PATCH v3 4/4] arm64: dts: qcom: msm8939: Add camss and cci

[Vincent Knecht via B4 Relay]

From: Vincent Knecht <vincent.knecht@mailoo.org>

Add the camera subsystem and CCI used to interface with cameras on the
Snapdragon 615.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi |   4 +
 arch/arm64/boot/dts/qcom/msm8939.dtsi        | 146 +++++++++++++++++++++++++++
 2 files changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
index adb96cd8d643e5fde1ac95c0fc3c9c3c3efb07e8..659d127b1bc3570d137ca986e4eacf600c183e5e 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
@@ -11,6 +11,10 @@
 #include "msm8939.dtsi"
 #include "pm8916.dtsi"
 
+&camss {
+	vdda-supply = <&pm8916_l2>;
+};
+
 &mdss_dsi0 {
 	vdda-supply = <&pm8916_l2>;
 	vddio-supply = <&pm8916_l6>;
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 68b92fdb996c26e7a1aadedf0f52e1afca85c4ab..082542b54d96adaed3e6b49bc3682005ea018a72 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1434,6 +1434,145 @@ mdss_dsi1_phy: phy@1aa0300 {
 			};
 		};
 
+		camss: isp@1b08000 {
+			compatible = "qcom,msm8939-camss";
+			reg = <0x01b08000 0x100>,
+			      <0x01b08400 0x100>,
+			      <0x01b08800 0x100>,
+			      <0x01b0ac00 0x200>,
+			      <0x01b00030 0x4>,
+			      <0x01b0b000 0x200>,
+			      <0x01b00038 0x4>,
+			      <0x01b00020 0x10>,
+			      <0x01b0a000 0x500>,
+			      <0x01b10000 0x1000>,
+			      <0x01b40000 0x200>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csi_clk_mux",
+				    "ispif",
+				    "vfe0",
+				    "vfe0_vbif";
+
+			clocks = <&gcc GCC_CAMSS_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CSI0_CLK>,
+				 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+				 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+				 <&gcc GCC_CAMSS_CSI1_CLK>,
+				 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+				 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+				 <&gcc GCC_CAMSS_CSI2_CLK>,
+				 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+				 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+				 <&gcc GCC_CAMSS_CSI2RDI_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+				 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+				 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_VFE0_CLK>,
+				 <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+				 <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+			clock-names = "ahb",
+				      "csi0",
+				      "csi0_ahb",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1",
+				      "csi1_ahb",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2",
+				      "csi2_ahb",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csi_vfe0",
+				      "ispif_ahb",
+				      "top_ahb",
+				      "vfe0",
+				      "vfe_ahb",
+				      "vfe_axi";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csiphy0",
+					  "csiphy1",
+					  "ispif",
+					  "vfe0";
+
+			iommus = <&apps_iommu 3>;
+
+			power-domains = <&gcc VFE_GDSC>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		cci: cci@1b0c000 {
+			compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+			reg = <0x01b0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				 <&gcc GCC_CAMSS_CCI_CLK>,
+				 <&gcc GCC_CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+					  <&gcc GCC_CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>,
+					       <19200000>;
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: gpu@1c00000 {
 			compatible = "qcom,adreno-405.0", "qcom,adreno";
 			reg = <0x01c00000 0x10000>;
@@ -1498,6 +1637,13 @@ apps_iommu: iommu@1ef0000 {
 			#iommu-cells = <1>;
 			qcom,iommu-secure-id = <17>;
 
+			/* vfe */
+			iommu-ctx@3000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			/* mdp_0: */
 			iommu-ctx@4000 {
 				compatible = "qcom,msm-iommu-v1-ns";

-- 
2.49.0

Re: [PATCH v3 1/4] media: qcom: camss: vfe: Add VBIF setting support

[Bryan O'Donoghue]

On 30/05/2025 10:00, Vincent Knecht via B4 Relay wrote:
> From: Vincent Knecht <vincent.knecht@mailoo.org>
> 
> Some devices need writing values to VFE VBIF registers.
> Add helper functions to do this.
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
>   drivers/media/platform/qcom/camss/Makefile         |  1 +
>   drivers/media/platform/qcom/camss/camss-vfe-4-1.c  | 12 +++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe-vbif.c | 25 ++++++++++++++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe-vbif.h | 19 ++++++++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe.c      |  9 ++++++++
>   drivers/media/platform/qcom/camss/camss-vfe.h      |  3 +++
>   6 files changed, 69 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index d26a9c24a430a831e0d865db4d96142da5276653..4c66d29ae505ae5adc717ae98f77fb736a6e15b9 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -21,6 +21,7 @@ qcom-camss-objs += \
>   		camss-vfe-680.o \
>   		camss-vfe-780.o \
>   		camss-vfe-gen1.o \
> +		camss-vfe-vbif.o \
>   		camss-vfe.o \
>   		camss-video.o \
>   		camss-format.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> index 901677293d971cf761944a660ef719af38203f22..9cf1ccdb2fe7ca9bf89b746af836e1035b457a8f 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> @@ -15,6 +15,7 @@
>   #include "camss.h"
>   #include "camss-vfe.h"
>   #include "camss-vfe-gen1.h"
> +#include "camss-vfe-vbif.h"
> 
>   #define VFE_0_HW_VERSION		0x000
> 
> @@ -733,6 +734,7 @@ static void vfe_set_qos(struct vfe_device *vfe)
>   {
>   	u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
>   	u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
> +	int ret;
> 
>   	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
>   	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
> @@ -742,6 +744,16 @@ static void vfe_set_qos(struct vfe_device *vfe)
>   	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
>   	writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
>   	writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
> +
> +	/* SoC-specific VBIF settings */
> +	if (vfe->res->has_vbif) {
> +		ret = vfe_vbif_apply_settings(vfe);
> +		if (ret < 0) {
> +			dev_err_ratelimited(vfe->camss->dev,
> +					    "VFE: VBIF error %d\n",
> +					    ret);
> +		}
> +	}
>   }
> 
>   static void vfe_set_ds(struct vfe_device *vfe)
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-vbif.c b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..691335f231a6001e6c535431a18b2e21ddc832c9
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-vbif.c
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * camss-vfe-vbif.c
> + *
> + * Qualcomm MSM Camera Subsystem - VFE VBIF Module
> + *
> + * Copyright (c) 2025, The Linux Foundation. All rights reserved.
> + *
> + */
> +
> +#include <linux/io.h>
> +
> +#include "camss.h"
> +#include "camss-vfe.h"
> +#include "camss-vfe-vbif.h"
> +
> +void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, vfe->vbif_base + reg);
> +}
> +
> +int vfe_vbif_apply_settings(struct vfe_device *vfe)
> +{
> +	return 0;
> +}
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-vbif.h b/drivers/media/platform/qcom/camss/camss-vfe-vbif.h
> new file mode 100644
> index 0000000000000000000000000000000000000000..502db629e961f67723b14a7c8c9ca973fe4c267c
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-vbif.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * camss-vfe-vbif.h
> + *
> + * Qualcomm MSM Camera Subsystem - VFE VBIF Module
> + *
> + * Copyright (c) 2025, The Linux Foundation. All rights reserved.
> + *
> + */
> +#ifndef QC_MSM_CAMSS_VFE_VBIF_H
> +#define QC_MSM_CAMSS_VFE_VBIF_H
> +
> +#include "camss-vfe.h"
> +
> +void vfe_vbif_write_reg(struct vfe_device *vfe, u32 reg, u32 val);
> +
> +int vfe_vbif_apply_settings(struct vfe_device *vfe);
> +
> +#endif /* QC_MSM_CAMSS_VFE_VBIF_H */
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 4bca6c3abaff9b898ea879674a3ff8f3592d3139..3138562d399444c5cf2ae96bf16b75b85ff5c5ca 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -1807,6 +1807,15 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>   		return PTR_ERR(vfe->base);
>   	}
> 
> +	if (vfe->res->has_vbif) {
> +		vfe->vbif_base = devm_platform_ioremap_resource_byname(pdev,
> +					vfe->res->vbif_name);

bad alignment

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#71:
new file mode 100644

CHECK: Alignment should match open parenthesis
#136: FILE: drivers/media/platform/qcom/camss/camss-vfe.c:1812:
+		vfe->vbif_base = devm_platform_ioremap_resource_byname(pdev,
+					vfe->res->vbif_name);

its trivial I can fix it for you when applying no need to resend

> +		if (IS_ERR(vfe->vbif_base)) {
> +			dev_err(dev, "could not map vbif memory\n");
> +			return PTR_ERR(vfe->vbif_base);
> +		}
> +	}
> +
>   	/* Interrupt */
> 
>   	ret = platform_get_irq_byname(pdev, res->interrupt[0]);
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
> index a23f666be7531e0366c73faea44ed245e7a8e30f..614e932c33da78e02e0800ce6534af7b14822f83 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
> @@ -136,6 +136,8 @@ struct vfe_subdev_resources {
>   	u8 line_num;
>   	bool has_pd;
>   	char *pd_name;
> +	bool has_vbif;
> +	char *vbif_name;
>   	const struct vfe_hw_ops *hw_ops;
>   	const struct camss_formats *formats_rdi;
>   	const struct camss_formats *formats_pix;
> @@ -145,6 +147,7 @@ struct vfe_device {
>   	struct camss *camss;
>   	u8 id;
>   	void __iomem *base;
> +	void __iomem *vbif_base;
>   	u32 irq;
>   	char irq_name[30];
>   	struct camss_clock *clock;
> 
> --
> 2.49.0
> 
> 
>Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Re: [PATCH v3 2/4] media: qcom: camss: Add support for MSM8939

[Bryan O'Donoghue]

On 30/05/2025 10:00, Vincent Knecht via B4 Relay wrote:
> +	    camss->res->version == CAMSS_8x39 ||

This is not correct - it should be 893x since 8939 and 8936 are ~ the 
same SoC - probably 36 is just a binned version of 39.

Anyway the x is the least significant digit.

Please fix
---
bod

Re: [PATCH v3 2/4] media: qcom: camss: Add support for MSM8939

[Bryan O'Donoghue]

On 30/05/2025 12:49, Bryan O'Donoghue wrote:
> On 30/05/2025 10:00, Vincent Knecht via B4 Relay wrote:
>> +	    camss->res->version == CAMSS_8x39 ||
> This is not correct - it should be 893x since 8939 and 8936 are ~ the
> same SoC - probably 36 is just a binned version of 39.
> 
> Anyway the x is the least significant digit.
> 
> Please fix
> ---
> bod
> 

No wait I'm wrong 8939 or 8039 - when adding 36 we will probably just 
use the compat string to differentiate.

This is fine.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Re: [PATCH v3 2/4] media: qcom: camss: Add support for MSM8939

[Konrad Dybcio]

On 5/30/25 1:49 PM, Bryan O'Donoghue wrote:
> On 30/05/2025 10:00, Vincent Knecht via B4 Relay wrote:
>> +	    camss->res->version == CAMSS_8x39 ||
> 
> This is not correct - it should be 893x since 8939 and 8936 are ~ the 
> same SoC - probably 36 is just a binned version of 39.
> 
> Anyway the x is the least significant digit.

x here is the modem config, but we generally agree to just use the
most obvious representative, so 8939 is ok

Konrad

Re: [PATCH v3 4/4] arm64: dts: qcom: msm8939: Add camss and cci

[Konrad Dybcio]

On 5/30/25 11:00 AM, Vincent Knecht via B4 Relay wrote:
> From: Vincent Knecht <vincent.knecht@mailoo.org>
> 
> Add the camera subsystem and CCI used to interface with cameras on the
> Snapdragon 615.
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v3 3/4] media: dt-bindings: Add qcom,msm8939-camss

[Krzysztof Kozlowski]

On Fri, May 30, 2025 at 11:00:06AM GMT, Vincent Knecht wrote:
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: ispif
> +      - const: vfe0
> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    items:
> +      - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.

Wrap according to Linux coding style, so at 80.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof