linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v3 00/15] media: rcar: Streams support
Date: Fri, 6 Jun 2025 14:32:44 +0200	[thread overview]
Message-ID: <20250606123244.GJ2770609@ragnatech.se> (raw)
In-Reply-To: <20250530-rcar-streams-v3-0-026655df7138@ideasonboard.com>

Hi Tomi,

On 2025-05-30 16:50:29 +0300, Tomi Valkeinen wrote:
> Add streams support to Renesas rcar platform driver.
> 
> The series attempts to keep compatibility with the current upstream.
> However, in upstream there's some kind of custom multi-stream support
> implemented to the rcar driver, which breaks at patch "media: rcar-csi2:
> Simplify rcsi2_calc_mbps()".
> 
> The behavior should not change when using a single stream.
> 
> Testing is problematic, as the only way currently for me to get multiple
> streams is by using the GMSL2 deserializer add-on board with GMSL2
> serializers. These are not supported in upstream. If someone has the
> hardware and wants to test, I can share the very-WIP branch that
> contains the missing pieces.

I'm happy to see this new version of this work, it looks so clean! I'm 
equally happy to see all the hard-coded assumptions we needed in the 
pipeline to emulate streams before being replaced with core 
functionality!

I have tested this with the single stream use-cases I have had before on 
Gen2, Gen3 and Gen4 and they all seem to function as before, nice work!

Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

As this is a rather large series do you think it would make sens to try 
and get some of the preparation/clean up patches merged before the new 
streams support?

> 
>  Tomi
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> Changes in v3:
> - Rebased on top of latest linux-media
> - Dropped dependencies which are already in linux-media (only remaining
>   dependency is v4l2_subdev_get_frame_desc_passthrough)
> - Tested on white-hawk board, using the staging deser TPG
> - Also tested in a WIP branch for GMSL2 (two video streams)
> - Link to v2: https://lore.kernel.org/r/20250326-rcar-streams-v2-0-d0d7002c641f@ideasonboard.com
> 
> Changes in v2:
> - Rebased on top of latest upstream, and updated the dependencies to
>   match the latest serieses sent.
> - Add new patch "media: rcar-csi2: Use the pad version of v4l2_get_link_freq()"
> - Drop "media: rcar-csi2: Fix typo" (it was not a typo)
> - Update the code in calc_mbps(). The previous method relied on
>   V4L2_CID_LINK_FREQ, but that's not available if the link-freq is
>   provided via get_mbus_config().
> - Dropped dependencies to Niklas' old series which doesn't apply
>   cleanly. It's needed for multi-stream, but not for the current
>   upstream which only has a single stream use case.
> - Link to v1: https://lore.kernel.org/r/20250219-rcar-streams-v1-0-f1b93e370aab@ideasonboard.com
> 
> ---
> Tomi Valkeinen (15):
>       media: rcar-csi2: Use the pad version of v4l2_get_link_freq()
>       media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC
>       media: rcar-isp: Move {enable|disable}_streams() calls
>       media: rcar-csi2: Move {enable|disable}_streams() calls
>       media: rcar-csi2: Move rcar2_calc_mbps()
>       media: rcar-csi2: Simplify rcsi2_calc_mbps()
>       media: rcar-csi2: Optimize rcsi2_calc_mbps()
>       media: rcar-csi2: Switch to Streams API
>       media: rcar-isp: Switch to Streams API
>       media: rcar-csi2: Add .get_frame_desc op
>       media: rcar-isp: Call get_frame_desc to find out VC & DT
>       media: rcar-csi2: Add more stream support to rcsi2_calc_mbps()
>       media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3)
>       media: rcar-csi2: Add full streams support
>       media: rcar-isp: Add full streams support
> 
>  drivers/media/platform/renesas/rcar-csi2.c      | 426 +++++++++++++++++-------
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 228 ++++++++++---
>  2 files changed, 479 insertions(+), 175 deletions(-)
> ---
> base-commit: 5e1ff2314797bf53636468a97719a8222deca9ae
> change-id: 20250219-rcar-streams-1fdea8860e5e
> prerequisite-change-id: 20250218-frame-desc-passthrough-66805e413974:v4
> prerequisite-patch-id: bce4a915a29a64f88ed1bb600c08df37d2ba20c6
> prerequisite-patch-id: 69b75e7dad9ced905cb39a72f18bebbf3e8f998a
> prerequisite-patch-id: 58463f6944c76acd6cf203b14a2836cdb0db2461
> 
> Best regards,
> -- 
> Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> 

-- 
Kind Regards,
Niklas Söderlund

      parent reply	other threads:[~2025-06-06 12:32 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-30 13:50 [PATCH v3 00/15] media: rcar: Streams support Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-07-02 15:07     ` Niklas Söderlund
2025-07-02 20:51       ` Laurent Pinchart
2025-06-06 11:57   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 11:58   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-06-02 14:03   ` Laurent Pinchart
2025-06-06 12:03   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 12:02   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 12:07   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-06-02 14:06   ` Laurent Pinchart
2025-06-06 12:09   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 09/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 14:17   ` Laurent Pinchart
2025-06-06 12:10   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-06-02  9:44   ` Laurent Pinchart
2025-06-06 12:14   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-06-02 13:22   ` Laurent Pinchart
2025-06-06 12:20   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 13:28   ` Laurent Pinchart
2025-06-06 12:25   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-06-02 13:49   ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-06-02 13:54   ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 15/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 13:57   ` Laurent Pinchart
2025-06-06 12:32 ` Niklas Söderlund [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250606123244.GJ2770609@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).