[PATCH 01/20] bitfield: introduce HWORD_UPDATE bitfield macros

[Nicolas Frattaroli <nicolas.frattaroli@collabora.com>]

Hardware of various vendors, but very notably Rockchip, often uses
32-bit registers where the upper 16-bit half of the register is a
write-enable mask for the lower half.

This type of hardware setup allows for more granular concurrent register
write access.

Over the years, many drivers have hand-rolled their own version of this
macro, usually without any checks, often called something like
HIWORD_UPDATE or FIELD_PREP_HIWORD, commonly with slightly different
semantics between them.

Clearly there is a demand for such a macro, and thus the demand should
be satisfied in a common header file.

Add two macros: HWORD_UPDATE, and HWORD_UPDATE_CONST. The latter is a
version that can be used in initializers, like FIELD_PREP_CONST. The
macro names are chosen to not clash with any potential other macros that
drivers may already have implemented themselves, while retaining a
familiar name.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 include/linux/bitfield.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h
index 6d9a53db54b66c0833973c880444bd289d9667b1..b90d88db7405f95b78cdd6f3426263086bab5aa6 100644
--- a/include/linux/bitfield.h
+++ b/include/linux/bitfield.h
@@ -8,6 +8,7 @@
 #define _LINUX_BITFIELD_H
 
 #include <linux/build_bug.h>
+#include <linux/limits.h>
 #include <linux/typecheck.h>
 #include <asm/byteorder.h>
 
@@ -142,6 +143,52 @@
 		(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))	\
 	)
 
+/**
+ * HWORD_UPDATE() - prepare a bitfield element with a mask in the upper half
+ * @_mask: shifted mask defining the field's length and position
+ * @_val:  value to put in the field
+ *
+ * HWORD_UPDATE() masks and shifts up the value, as well as bitwise ORs the
+ * result with the mask shifted up by 16.
+ *
+ * This is useful for a common design of hardware registers where the upper
+ * 16-bit half of a 32-bit register is used as a write-enable mask. In such a
+ * register, a bit in the lower half is only updated if the corresponding bit
+ * in the upper half is high.
+ */
+#define HWORD_UPDATE(_mask, _val)					 \
+	({								 \
+		__BF_FIELD_CHECK(_mask, ((u16) 0U), _val,		 \
+				 "HWORD_UPDATE: ");			 \
+		(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) | \
+		((_mask) << 16);					 \
+	})
+
+/**
+ * HWORD_UPDATE_CONST() - prepare a constant bitfield element with a mask in
+ *                        the upper half
+ * @_mask: shifted mask defining the field's length and position
+ * @_val:  value to put in the field
+ *
+ * HWORD_UPDATE_CONST() masks and shifts up the value, as well as bitwise ORs
+ * the result with the mask shifted up by 16.
+ *
+ * This is useful for a common design of hardware registers where the upper
+ * 16-bit half of a 32-bit register is used as a write-enable mask. In such a
+ * register, a bit in the lower half is only updated if the corresponding bit
+ * in the upper half is high.
+ *
+ * Unlike HWORD_UPDATE(), this is a constant expression and can therefore
+ * be used in initializers. Error checking is less comfortable for this
+ * version.
+ */
+#define HWORD_UPDATE_CONST(_mask, _val)					  \
+	(								  \
+		FIELD_PREP_CONST(_mask, _val) |				  \
+		(BUILD_BUG_ON_ZERO(const_true((u64) (_mask) > U16_MAX)) + \
+		 ((_mask) << 16))					  \
+	)
+
 /**
  * FIELD_GET() - extract a bitfield element
  * @_mask: shifted mask defining the field's length and position

-- 
2.49.0