From: Stuart Burtner via B4 Relay <devnull+sburtner.d3embedded.com@kernel.org>
To: Stuart Burtner <sburtner@d3embedded.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Spencer Hill <shill@d3engineering.com>,
Sebastian LaVine <slavine@d3engineering.com>
Subject: [PATCH 1/2] media: dt-bindings: Add Sony IMX728
Date: Wed, 25 Jun 2025 14:20:03 -0400 [thread overview]
Message-ID: <20250625-imx728-on-6-12-v4-v1-1-cfc6e18c3e23@d3embedded.com> (raw)
In-Reply-To: <20250625-imx728-on-6-12-v4-v1-0-cfc6e18c3e23@d3embedded.com>
From: Stuart Burtner <sburtner@d3embedded.com>
Add bindings for the Sony IMX728.
Co-developed-by: Spencer Hill <shill@d3engineering.com>
Signed-off-by: Spencer Hill <shill@d3engineering.com>
Co-developed-by: Sebastian LaVine <slavine@d3engineering.com>
Signed-off-by: Sebastian LaVine <slavine@d3engineering.com>
Signed-off-by: Stuart Burtner <sburtner@d3embedded.com>
---
.../devicetree/bindings/media/i2c/sony,imx728.yaml | 95 ++++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 101 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..3da4be0817d1bebf9058cd10b2f8dd81dc484be7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX728 Camera Sensor
+
+maintainers:
+ - Stuart Burtner <sburtner@d3embedded.com>
+
+description:
+ The Sony IMX728 is a 1/1.72-Inch CMOS Solid-state image sensor with a
+ color square pixel array and 8.39M active pixels. It is programmed
+ through an I2C interface.
+
+ The sensor can output up to 3840x2160 at a maximum of 45 frames/s over
+ a CSI-2 serial interface. It supports RAW24/20/16/12 and 10.
+
+properties:
+ compatible:
+ enum:
+ - sony,imx728
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Clock frequency from 18 to 30MHz
+ maxItems: 1
+
+ clock-names:
+ const: inck
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ XCLR (System Reset) pin.
+
+ error0-gpios:
+ maxItems: 1
+ description:
+ XWRN pin.
+
+ error1-gpios:
+ maxItems: 1
+ description:
+ XERR pin.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: ../video-interfaces.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx728";
+ reg = <0x1a>;
+
+ clocks = <&fixed_clock>;
+ clock-names = "inck";
+
+ reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+ error0-gpios = <&sens_exp 1 GPIO_ACTIVE_HIGH>;
+ error1-gpios = <&sens_exp 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ camera1: endpoint {
+ remote-endpoint = <&vin1a_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d0f18fdba068b0cc2dce434e0471f6a9a3330843..74db2caf18157dec74fb2e23c33f66522092941c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21546,6 +21546,12 @@ T: git git://linuxtv.org/media.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
F: drivers/media/i2c/imx415.c
+SONY IMX728 SENSOR DRIVER
+M: Stuart Burtner <sburtner@d3embedded.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
+
SONY MEMORYSTICK SUBSYSTEM
M: Maxim Levitsky <maximlevitsky@gmail.com>
M: Alex Dubov <oakad@yahoo.com>
--
2.34.1
next prev parent reply other threads:[~2025-06-25 18:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-25 18:20 [PATCH 0/2] media: i2c: Add driver for Sony IMX728 Stuart Burtner via B4 Relay
2025-06-25 18:20 ` Stuart Burtner via B4 Relay [this message]
2025-07-08 8:39 ` [PATCH 1/2] media: dt-bindings: Add " Krzysztof Kozlowski
2025-06-25 18:20 ` [PATCH 2/2] media: i2c: Add driver for " Stuart Burtner via B4 Relay
2025-07-08 8:37 ` [PATCH 0/2] " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250625-imx728-on-6-12-v4-v1-1-cfc6e18c3e23@d3embedded.com \
--to=devnull+sburtner.d3embedded.com@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sakari.ailus@linux.intel.com \
--cc=sburtner@d3embedded.com \
--cc=shawnguo@kernel.org \
--cc=shill@d3engineering.com \
--cc=slavine@d3engineering.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).