Re: [PATCH 1/3] i2c: stm32: fix the device used for the DMA map

[Alain Volmat <alain.volmat@foss.st.com>]

Hi Clément,

On Mon, Jun 16, 2025 at 10:53:54AM +0200, Clément Le Goffic wrote:
> If the DMA mapping failed, it produced an error log with the wrong
> device name:
> "stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
> Fix this issue by replacing the dev with the I2C dev.

Indeed, nice catch ! Thanks a lot !

> 
> Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
> Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
> index 157c64e27d0b..5e0b31aed774 100644
> --- a/drivers/i2c/busses/i2c-stm32.c
> +++ b/drivers/i2c/busses/i2c-stm32.c
> @@ -118,7 +118,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
>  	dma->dma_len = len;
>  	chan_dev = dma->chan_using->device->dev;
>  
> -	dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
> +	dma->dma_buf = dma_map_single(dev, buf, dma->dma_len,
>  				      dma->dma_data_dir);
>  	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
>  		dev_err(dev, "DMA mapping failed\n");
> 
> -- 
> 2.43.0
>

Acked-by: Alain Volmat <alain.volmat@foss.st.com>

Regards,
Alain