[PATCH v3 1/3] i2c: stm32: fix the device used for the DMA map

["Clément Le Goffic" <clement.legoffic@foss.st.com>]

If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.

Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
---
 drivers/i2c/busses/i2c-stm32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 157c64e27d0b..272a5dffb08f 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -118,7 +118,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
 	dma->dma_len = len;
 	chan_dev = dma->chan_using->device->dev;
 
-	dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
+	dma->dma_buf = dma_map_single(dev, buf, dma->dma_len,
 				      dma->dma_data_dir);
 	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
 		dev_err(dev, "DMA mapping failed\n");
@@ -150,7 +150,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
 	return 0;
 
 err:
-	dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
+	dma_unmap_single(dev, dma->dma_buf, dma->dma_len,
 			 dma->dma_data_dir);
 	return ret;
 }

-- 
2.43.0