linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wenmeng Liu <quic_wenmliu@quicinc.com>
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
	"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>,
	Wenmeng Liu <quic_wenmliu@quicinc.com>
Subject: [PATCH v3 0/3] media: qcom: camss: Add sa8775p camss TPG support
Date: Fri, 22 Aug 2025 20:09:18 +0800	[thread overview]
Message-ID: <20250822-camss_tpg-v3-0-c7833a5f10d0@quicinc.com> (raw)

SA8775P is a Qualcomm SoC. This series adds driver changes to
bring up the TPG interfaces in SA8775P.

We have tested this on qcs9100-ride board with 'Test Pattern Generator'.
Unlike CSID TPG, this TPG can be seen as a combination of CSIPHY and sensor.

Tested with following commands:
- media-ctl --reset
- media-ctl -V '"msm_tpg0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -l '"msm_tpg0":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- v4l2-ctl -d /dev/v4l-subdev4 -c test_pattern=9
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4608x2592 /dev/video0
  --capture=7

Dependencies:
https://lore.kernel.org/all/20250814101615.1102795-10-quic_vikramsa@quicinc.com/
https://lore.kernel.org/all/20250813053724.232494-1-quic_vikramsa@quicinc.com/

changes in v3:
- Change the payload mode string
- Change the method for setting the TPG clock rate
- Remove the TPG IRQ
- Format correction
- Remove unused variables
- Merge functions and eliminate redundancy
- Modify the register write method
- Change TPG matching method to use grp_id
- Encapsulate magic numbers as macros
- Link to v2: https://lore.kernel.org/all/20250717-lemans_tpg-v2-0-a2538659349c@quicinc.com/

Changes in v2:
- rebase tpg changes based on new versions of sa8775p and qcs8300 camss patches
- Link to v1: https://lore.kernel.org/all/20250211-sa8775p_tpg-v1-0-3f76c5f8431f@quicinc.com/

---
Wenmeng Liu (3):
      media: qcom: camss: Add support for TPG common
      media: qcom: camss: Add link support for TPG common
      media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300

 drivers/media/platform/qcom/camss/Makefile         |   2 +
 .../media/platform/qcom/camss/camss-csid-gen3.c    |  17 +
 drivers/media/platform/qcom/camss/camss-csid.c     |  43 +-
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-csiphy.h   |   2 +
 drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 219 +++++++
 drivers/media/platform/qcom/camss/camss-tpg.c      | 696 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-tpg.h      | 125 ++++
 drivers/media/platform/qcom/camss/camss.c          | 130 ++++
 drivers/media/platform/qcom/camss/camss.h          |   5 +
 10 files changed, 1226 insertions(+), 14 deletions(-)
---
base-commit: 6afac82056e38e02266cd30f458b25a1f9017508
change-id: 20250822-camss_tpg-718db678d984

Best regards,
-- 
Wenmeng Liu <quic_wenmliu@quicinc.com>


             reply	other threads:[~2025-08-22 12:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-22 12:09 Wenmeng Liu [this message]
2025-08-22 12:09 ` [PATCH v3 1/3] media: qcom: camss: Add support for TPG common Wenmeng Liu
2025-08-22 12:09 ` [PATCH v3 2/3] media: qcom: camss: Add link " Wenmeng Liu
2025-08-22 12:09 ` [PATCH v3 3/3] media: qcom: camss: tpg: Add TPG support for SA8775P and QCS8300 Wenmeng Liu
2025-09-03 12:16   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250822-camss_tpg-v3-0-c7833a5f10d0@quicinc.com \
    --to=quic_wenmliu@quicinc.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=todor.too@gmail.com \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).