From: Michael Riesch via B4 Relay <devnull+michael.riesch.collabora.com@kernel.org>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Frank Li <Frank.li@nxp.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Kever Yang <kever.yang@rock-chips.com>,
Collabora Kernel Team <kernel@collabora.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org,
Michael Riesch <michael.riesch@collabora.com>
Subject: [PATCH v3 0/2] media: synopsys: csi2rx: add support for rk3588 variant
Date: Wed, 25 Mar 2026 11:25:33 +0100 [thread overview]
Message-ID: <20260305-rk3588-csi2rx-v3-0-754473981f39@collabora.com> (raw)
Habidere,
The Rockchip RK3588 features six MIPI CSI-2 receiver units:
- MIPI0: connected to MIPI DCPHY0
- MIPI1: connected to MIPI DCPHY1
- MIPI2: connected to MIPI DPHY0
- MIPI3: connected to MIPI DPHY0-1 (only with split DPHY0)
- MIPI4: connected to MIPI DPHY1
- MIPI5: connected to MIPI DPHY1-1 (only with split DPHY1)
The MIPI DCPHYs (at least the CSI-2 features of them) as well
as the split DPHY mode of the DPHYs are not yet supported by
mainline. However, we can already provide support for the
MIPI2 and MIPI4 units.
When support for the split DPHY mode is introduced, the DPHY
nodes should have the property
#phy-cells = <1>;
and the MIPI CSI-2 receiver nodes should have the property
phys = <&csi_dphy{0,1} {0,1}>;
in case the split mode is desired. Since this is a board
specific hardware design, the properties need to be changed
in the board device tree (or any overlays).
As reasonable default, however, we can define, e.g.,
#phy-cells = <0>;
and
phys = <&csi_dphy{0,1}>;
in the SoC device tree include.
This series introduces initial support for this default
configuration.
Looking forward to your comments!
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
---
Changes in v3:
- rebased onto Sakari's cleanup branch (as Frank's patches were
merged) (Sakari)
- added Rob's Acked-by
- Link to v2: https://lore.kernel.org/r/20260305-rk3588-csi2rx-v2-0-79d01b615486@collabora.com
Changes in v2:
- use fallback compatible instead of separate compatible (Krzysztof)
- dropped patch 2 and 4 (as a consequence thereof)
- Link to v1: https://lore.kernel.org/r/20260305-rk3588-csi2rx-v1-0-0cd8d2bf28c0@collabora.com
---
Michael Riesch (2):
media: dt-bindings: rockchip,rk3568-mipi-csi2: add rk3588 compatible
arm64: dts: rockchip: add mipi csi-2 receiver nodes to rk3588
.../bindings/media/rockchip,rk3568-mipi-csi2.yaml | 10 +++--
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 52 ++++++++++++++++++++++
2 files changed, 59 insertions(+), 3 deletions(-)
---
base-commit: 66bd47face7d5d55e6c3b5dc16fb3c2d6e205360
change-id: 20260305-rk3588-csi2rx-a11f7c15a40a
Best regards,
--
Michael Riesch <michael.riesch@collabora.com>
next reply other threads:[~2026-03-25 10:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 10:25 Michael Riesch via B4 Relay [this message]
2026-03-25 10:25 ` [PATCH v3 1/2] media: dt-bindings: rockchip,rk3568-mipi-csi2: add rk3588 compatible Michael Riesch via B4 Relay
2026-03-25 21:06 ` Rob Herring
2026-03-25 21:34 ` Michael Riesch
2026-03-25 10:25 ` [PATCH v3 2/2] arm64: dts: rockchip: add mipi csi-2 receiver nodes to rk3588 Michael Riesch via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260305-rk3588-csi2rx-v3-0-754473981f39@collabora.com \
--to=devnull+michael.riesch.collabora.com@kernel.org \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=michael.riesch@collabora.com \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox