From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>,
Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>
Cc: linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Subject: [PATCH v6 0/5] Add CCI and imx577 sensor support for Talos evk
Date: Thu, 05 Mar 2026 17:48:11 +0800 [thread overview]
Message-ID: <20260305-sm6150_evk-v6-0-38ce4360d5e0@oss.qualcomm.com> (raw)
Talos EVK is based on the Qualcomm SM6150 SoC.
It lacks a camera sensor in its default configuration.
This series adds CCI support and enables the IMX577 sensor via CSIPHY1
through device tree overlay.
We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl -d /dev/media0 --reset
- media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5
This patch series depends on patch series:
https://lore.kernel.org/all/20260302121159.1938694-1-tessolveupstream@gmail.com/
Changes in v6:
- Adjust patch order. -- Krzysztof
- Change MCLK pinctrl name and add reset pinctrl. -- Konrad
- Fix typo, rename imx577_ep1 to imx577_ep. -- vladimir
- Link to v5: https://lore.kernel.org/r/20260122-sm6150_evk-v5-0-039b170450a3@oss.qualcomm.com
Changes in v5:
- Modify the commit message of the cci dt-binding patch.
- Link to v4: https://lore.kernel.org/r/20260122-sm6150_evk-v4-0-a908d49892e7@oss.qualcomm.com
Changes in v4:
- Add CCI properties to the existing portfolio. -- Loic, Krzysztof
- Modify the incorrect dtb install configuration. -- Vladimir
- Link to v3: https://lore.kernel.org/r/20260115-sm6150_evk-v3-0-81526dd15543@oss.qualcomm.com
Changes in v3:
- Add generic names for the CCI clock. -- Loic, Krzysztof
- Split cci node, removed double space. -- Dmitry
- Rename camera dtso name, add detailed description. -- Dmitry,
Vladimir, Bryan
- Add dtbo-y for dtso. -- Rob
- Interrupts cell change adaptation.
- Delete cci sleep pinctrl state.
- Link to v2: https://lore.kernel.org/r/20260106-sm6150_evk-v2-0-bb112cb83d74@oss.qualcomm.com
Changes in v2:
- Modify the CCI dts style and commit msg. - Konrad
- Split mclk change as a separate patch. - Vladimir
- Remove clock-lanes. - Vladimir
- Add mclk3(GPIO31). - Vladimir
- Link to v1:
https://lore.kernel.org/all/20251222-sm6150_evk-v1-0-4d260a31c00d@oss.qualcomm.com/
---
Wenmeng Liu (5):
dt-bindings: i2c: qcom-cci: Document sm6150 compatible
arm64: dts: qcom: talos: Add camss node
arm64: dts: qcom: talos: Add CCI definitions
arm64: dts: qcom: talos: Add camera MCLK pinctrl
arm64: dts: qcom: talos-evk-camera: Add DT overlay
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 3 +
.../boot/dts/qcom/talos-evk-camera-imx577.dtso | 63 +++++
arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 7 +
arch/arm64/boot/dts/qcom/talos.dtsi | 279 +++++++++++++++++++++
5 files changed, 354 insertions(+)
---
base-commit: 9fad1d148df6f36105159c2503d0ecb1397bc89a
change-id: 20251222-sm6150_evk-8ebed9e9f3bc
prerequisite-message-id: 20260302121159.1938694-1-tessolveupstream@gmail.com
prerequisite-patch-id: 065fda916d7faca61113e1230fcc0ce3916442fe
prerequisite-patch-id: c009966e432e7f11bbb895167e32e517b6ff76e3
prerequisite-patch-id: a44d58bc0cfaab99dff8c4e12ecd0312447766be
Best regards,
--
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
next reply other threads:[~2026-03-05 9:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-05 9:48 Wenmeng Liu [this message]
2026-03-05 9:48 ` [PATCH v6 1/5] dt-bindings: i2c: qcom-cci: Document sm6150 compatible Wenmeng Liu
2026-03-20 21:23 ` Wolfram Sang
2026-03-05 9:48 ` [PATCH v6 2/5] arm64: dts: qcom: talos: Add camss node Wenmeng Liu
2026-03-05 9:48 ` [PATCH v6 3/5] arm64: dts: qcom: talos: Add CCI definitions Wenmeng Liu
2026-03-05 9:48 ` [PATCH v6 4/5] arm64: dts: qcom: talos: Add camera MCLK pinctrl Wenmeng Liu
2026-03-05 9:48 ` [PATCH v6 5/5] arm64: dts: qcom: talos-evk-camera: Add DT overlay Wenmeng Liu
2026-03-23 15:22 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260305-sm6150_evk-v6-0-38ce4360d5e0@oss.qualcomm.com \
--to=wenmeng.liu@oss.qualcomm.com \
--cc=Frank.Li@nxp.com \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox