From: Richard Acayan <mailingradian@gmail.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Bryan O'Donoghue" <bod@kernel.org>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Tianshu Qiu <tian.shu.qiu@intel.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Cc: Robert Mader <robert.mader@collabora.com>,
David Heidelberg <david@ixit.cz>,
phone-devel@vger.kernel.org,
Richard Acayan <mailingradian@gmail.com>
Subject: [PATCH v11 2/7] dt-bindings: media: i2c: Add Sony IMX355
Date: Mon, 23 Mar 2026 22:01:27 -0400 [thread overview]
Message-ID: <20260324020132.8683-3-mailingradian@gmail.com> (raw)
In-Reply-To: <20260324020132.8683-1-mailingradian@gmail.com>
The IMX355 camera sensor is a camera sensor that can be found as the
front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
3a, and Pixel 3a XL. It already has a driver, but needs support for
device tree. Document the IMX355 to support defining it in device tree.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
.../bindings/media/i2c/sony,imx355.yaml | 111 ++++++++++++++++++
1 file changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
new file mode 100644
index 000000000000..6050d7e7dcfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX355 Sensor
+
+maintainers:
+ - Richard Acayan <mailingradian@gmail.com>
+
+description:
+ The IMX355 sensor is a 3280x2464 image sensor, commonly found as the front
+ camera in smartphones.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: sony,imx355
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply.
+
+ dvdd-supply:
+ description: Digital power supply.
+
+ dovdd-supply:
+ description: Interface power supply.
+
+ reset-gpios:
+ description: Reset GPIO (active low).
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 4
+ maxItems: 4
+
+ required:
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - avdd-supply
+ - dvdd-supply
+ - dovdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx355";
+ reg = <0x1a>;
+
+ clocks = <&camcc CAM_CC_MCLK2_CLK>;
+
+ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&cam_front_ldo>;
+ dvdd-supply = <&cam_front_ldo>;
+ dovdd-supply = <&cam_vio_ldo>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_front_default>;
+
+ rotation = <270>;
+ orientation = <0>;
+
+ port {
+ cam_front_endpoint: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000>;
+ remote-endpoint = <&camss_endpoint1>;
+ };
+ };
+ };
+ };
--
2.53.0
next prev parent reply other threads:[~2026-03-24 2:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 2:01 [PATCH v11 0/7] media: i2c: IMX355 for the Pixel 3a Richard Acayan
2026-03-24 2:01 ` [PATCH v11 1/7] dt-bindings: media: qcom,sdm670-camss: Remove clock-lanes requirement Richard Acayan
2026-03-24 2:01 ` Richard Acayan [this message]
2026-03-24 2:01 ` [PATCH v11 3/7] media: i2c: imx355: Support devicetree and power management Richard Acayan
2026-03-24 2:01 ` [PATCH v11 4/7] media: i2c: imx355: Restrict data lanes to 4 Richard Acayan
2026-03-24 2:01 ` [PATCH v11 5/7] arm64: dts: qcom: sdm670: label the camss ports instead of endpoints Richard Acayan
2026-03-24 2:01 ` [PATCH v11 6/7] arm64: dts: qcom: sdm670: add camera mclk pins Richard Acayan
2026-03-24 2:01 ` [PATCH v11 7/7] arm64: dts: qcom: sdm670-google-sargo: add imx355 front camera Richard Acayan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324020132.8683-3-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=rfoss@kernel.org \
--cc=robert.mader@collabora.com \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox