[PATCH v3 06/22] media: imx219: Don't update exposure limits while setting format

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Don't update exposure limits explicitly while setting format. This is
already done through the s_ctrl() callback.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/imx219.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index a72630ad1561..ca6a5939773d 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -867,8 +867,6 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 	crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2;
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		int exposure_max;
-		int exposure_def;
 		int llp_min;
 		int pixel_rate;
 
@@ -887,18 +885,6 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 		if (ret)
 			return ret;
 
-		/* Update max exposure while meeting expected vblanking */
-		exposure_max = mode->fll_def - IMX219_EXPOSURE_OFFSET;
-		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
-				exposure_max : IMX219_EXPOSURE_DEFAULT;
-		ret = __v4l2_ctrl_modify_range(imx219->exposure,
-					       imx219->exposure->minimum,
-					       exposure_max,
-					       imx219->exposure->step,
-					       exposure_def);
-		if (ret)
-			return ret;
-
 		/*
 		 * With analog binning the default minimum line length of 3448
 		 * can cause artefacts with RAW10 formats, because the ADC
-- 
2.47.3