[PATCH v3 1/3] media: mali-c55: add missing of_reserved_mem_device_release()

[PATCH v3 1/3] media: mali-c55: add missing of_reserved_mem_device_release()

[David Carlier]

mali_c55_probe() calls of_reserved_mem_device_init() to associate
reserved memory regions with the device. This function allocates a
struct rmem_assigned_device and adds it to a global linked list, which
must be explicitly released via of_reserved_mem_device_release() — there
is no devm variant of this API.

However, neither the probe error paths nor mali_c55_remove() called
of_reserved_mem_device_release(). Any probe failure after the
of_reserved_mem_device_init() call, as well as every normal device
removal, leaked the reserved memory association on the global list.

Fix this by adding an err_release_mem label at the end of the probe
error chain and calling of_reserved_mem_device_release() in
mali_c55_remove(). The remove teardown order is also corrected to call
mali_c55_media_frameworks_deinit() before kfree(), mirroring the probe
init order in reverse.

Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
---
 drivers/media/platform/arm/mali-c55/mali-c55-core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index c1a562cd214e..5cb59c70ffc9 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -806,8 +806,10 @@ static int mali_c55_probe(struct platform_device *pdev)
 	vb2_dma_contig_set_max_seg_size(dev, UINT_MAX);
 
 	ret = __mali_c55_power_on(mali_c55);
-	if (ret)
-		return dev_err_probe(dev, ret, "failed to power on\n");
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to power on\n");
+		goto err_release_mem;
+	}
 
 	ret = mali_c55_check_hwcfg(mali_c55);
 	if (ret)
@@ -846,6 +848,8 @@ static int mali_c55_probe(struct platform_device *pdev)
 	kfree(mali_c55->context.registers);
 err_power_off:
 	__mali_c55_power_off(mali_c55);
+err_release_mem:
+	of_reserved_mem_device_release(dev);
 
 	return ret;
 }
@@ -854,8 +858,9 @@ static void mali_c55_remove(struct platform_device *pdev)
 {
 	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
 
-	kfree(mali_c55->context.registers);
 	mali_c55_media_frameworks_deinit(mali_c55);
+	kfree(mali_c55->context.registers);
+	of_reserved_mem_device_release(&pdev->dev);
 }
 
 static const struct of_device_id mali_c55_of_match[] = {
-- 
2.53.0

[PATCH v3 2/3] media: mali-c55: add missing pm_runtime_disable() in remove

[David Carlier]

pm_runtime_enable() is called during probe but mali_c55_remove() never
calls pm_runtime_disable(), leaving the device's runtime PM state
enabled after the driver is unbound.

Add the missing pm_runtime_disable() call to the remove path.

Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
---
 drivers/media/platform/arm/mali-c55/mali-c55-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index 5cb59c70ffc9..38b11d5ba168 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -859,6 +859,7 @@ static void mali_c55_remove(struct platform_device *pdev)
 	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
 
 	mali_c55_media_frameworks_deinit(mali_c55);
+	pm_runtime_disable(&pdev->dev);
 	kfree(mali_c55->context.registers);
 	of_reserved_mem_device_release(&pdev->dev);
 }
-- 
2.53.0

[PATCH v3 3/3] media: mali-c55: fix probe error path skipping pm_runtime_disable()

[David Carlier]

When mali_c55_media_frameworks_init() fails, the goto target jumps to
err_free_context_registers, skipping pm_runtime_disable() despite
pm_runtime having already been enabled earlier in the function.

Fix this by adding an err_pm_runtime_disable label and redirecting the
frameworks init failure to it, so pm_runtime is properly unwound on
that error path.

Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
---
 drivers/media/platform/arm/mali-c55/mali-c55-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index 38b11d5ba168..f998f914b355 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -828,7 +828,7 @@ static int mali_c55_probe(struct platform_device *pdev)
 
 	ret = mali_c55_media_frameworks_init(mali_c55);
 	if (ret)
-		goto err_free_context_registers;
+		goto err_pm_runtime_disable;
 
 	pm_runtime_idle(&pdev->dev);
 
@@ -843,8 +843,8 @@ static int mali_c55_probe(struct platform_device *pdev)
 
 err_deinit_media_frameworks:
 	mali_c55_media_frameworks_deinit(mali_c55);
+err_pm_runtime_disable:
 	pm_runtime_disable(&pdev->dev);
-err_free_context_registers:
 	kfree(mali_c55->context.registers);
 err_power_off:
 	__mali_c55_power_off(mali_c55);
-- 
2.53.0

Re: [PATCH v3 1/3] media: mali-c55: add missing of_reserved_mem_device_release()

[Jacopo Mondi]

Hi David

On Fri, Mar 27, 2026 at 03:07:05PM +0000, David Carlier wrote:
> mali_c55_probe() calls of_reserved_mem_device_init() to associate
> reserved memory regions with the device. This function allocates a
> struct rmem_assigned_device and adds it to a global linked list, which
> must be explicitly released via of_reserved_mem_device_release() — there
> is no devm variant of this API.
>
> However, neither the probe error paths nor mali_c55_remove() called
> of_reserved_mem_device_release(). Any probe failure after the
> of_reserved_mem_device_init() call, as well as every normal device
> removal, leaked the reserved memory association on the global list.
>
> Fix this by adding an err_release_mem label at the end of the probe
> error chain and calling of_reserved_mem_device_release() in
> mali_c55_remove(). The remove teardown order is also corrected to call
> mali_c55_media_frameworks_deinit() before kfree(), mirroring the probe
> init order in reverse.
>
> Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> Signed-off-by: David Carlier <devnexen@gmail.com>

Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

With your permission, I'll take these three patches in a follow-up
series that fixes the module loading/unloading.

I could also specify it as pre-requisite to b4, I'll see what's easier

Thanks
  j

> ---
>  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> index c1a562cd214e..5cb59c70ffc9 100644
> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> @@ -806,8 +806,10 @@ static int mali_c55_probe(struct platform_device *pdev)
>  	vb2_dma_contig_set_max_seg_size(dev, UINT_MAX);
>
>  	ret = __mali_c55_power_on(mali_c55);
> -	if (ret)
> -		return dev_err_probe(dev, ret, "failed to power on\n");
> +	if (ret) {
> +		dev_err_probe(dev, ret, "failed to power on\n");
> +		goto err_release_mem;
> +	}
>
>  	ret = mali_c55_check_hwcfg(mali_c55);
>  	if (ret)
> @@ -846,6 +848,8 @@ static int mali_c55_probe(struct platform_device *pdev)
>  	kfree(mali_c55->context.registers);
>  err_power_off:
>  	__mali_c55_power_off(mali_c55);
> +err_release_mem:
> +	of_reserved_mem_device_release(dev);
>
>  	return ret;
>  }
> @@ -854,8 +858,9 @@ static void mali_c55_remove(struct platform_device *pdev)
>  {
>  	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
>
> -	kfree(mali_c55->context.registers);
>  	mali_c55_media_frameworks_deinit(mali_c55);
> +	kfree(mali_c55->context.registers);
> +	of_reserved_mem_device_release(&pdev->dev);
>  }
>
>  static const struct of_device_id mali_c55_of_match[] = {
> --
> 2.53.0
>
>

Re: [PATCH v3 2/3] media: mali-c55: add missing pm_runtime_disable() in remove

[Jacopo Mondi]

Hi David

On Fri, Mar 27, 2026 at 03:07:06PM +0000, David Carlier wrote:
> pm_runtime_enable() is called during probe but mali_c55_remove() never
> calls pm_runtime_disable(), leaving the device's runtime PM state
> enabled after the driver is unbound.
>
> Add the missing pm_runtime_disable() call to the remove path.

The driver doesn't depend on PM, so we need to explicitly power-off
the peripheral in remove() (and set the pm_runtime status to
suspended)

>
> Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> Signed-off-by: David Carlier <devnexen@gmail.com>

Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

This patch is however correct, I'll add the power-off on top.

> ---
>  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> index 5cb59c70ffc9..38b11d5ba168 100644
> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> @@ -859,6 +859,7 @@ static void mali_c55_remove(struct platform_device *pdev)
>  	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
>
>  	mali_c55_media_frameworks_deinit(mali_c55);
> +	pm_runtime_disable(&pdev->dev);
>  	kfree(mali_c55->context.registers);
>  	of_reserved_mem_device_release(&pdev->dev);
>  }
> --
> 2.53.0
>
>

Re: [PATCH v3 3/3] media: mali-c55: fix probe error path skipping pm_runtime_disable()

[Jacopo Mondi]

Hi David

On Fri, Mar 27, 2026 at 03:07:07PM +0000, David Carlier wrote:
> When mali_c55_media_frameworks_init() fails, the goto target jumps to
> err_free_context_registers, skipping pm_runtime_disable() despite
> pm_runtime having already been enabled earlier in the function.
>
> Fix this by adding an err_pm_runtime_disable label and redirecting the
> frameworks init failure to it, so pm_runtime is properly unwound on
> that error path.
>
> Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> Signed-off-by: David Carlier <devnexen@gmail.com>
> ---
>  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> index 38b11d5ba168..f998f914b355 100644
> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> @@ -828,7 +828,7 @@ static int mali_c55_probe(struct platform_device *pdev)
>
>  	ret = mali_c55_media_frameworks_init(mali_c55);
>  	if (ret)
> -		goto err_free_context_registers;
> +		goto err_pm_runtime_disable;
>
>  	pm_runtime_idle(&pdev->dev);
>
> @@ -843,8 +843,8 @@ static int mali_c55_probe(struct platform_device *pdev)
>
>  err_deinit_media_frameworks:
>  	mali_c55_media_frameworks_deinit(mali_c55);
> +err_pm_runtime_disable:

Is it necessary to

        pm_runtime_set_suspended(&pdev->dev);

?

>  	pm_runtime_disable(&pdev->dev);
> -err_free_context_registers:
>  	kfree(mali_c55->context.registers);
>  err_power_off:
>  	__mali_c55_power_off(mali_c55);
> --
> 2.53.0
>
>

Re: [PATCH v3 1/3] media: mali-c55: add missing of_reserved_mem_device_release()

[David CARLIER]

On Fri, 27 Mar 2026 at 16:58, Jacopo Mondi
<jacopo.mondi@ideasonboard.com> wrote:
>
> Hi David
>
> On Fri, Mar 27, 2026 at 03:07:05PM +0000, David Carlier wrote:
> > mali_c55_probe() calls of_reserved_mem_device_init() to associate
> > reserved memory regions with the device. This function allocates a
> > struct rmem_assigned_device and adds it to a global linked list, which
> > must be explicitly released via of_reserved_mem_device_release() — there
> > is no devm variant of this API.
> >
> > However, neither the probe error paths nor mali_c55_remove() called
> > of_reserved_mem_device_release(). Any probe failure after the
> > of_reserved_mem_device_init() call, as well as every normal device
> > removal, leaked the reserved memory association on the global list.
> >
> > Fix this by adding an err_release_mem label at the end of the probe
> > error chain and calling of_reserved_mem_device_release() in
> > mali_c55_remove(). The remove teardown order is also corrected to call
> > mali_c55_media_frameworks_deinit() before kfree(), mirroring the probe
> > init order in reverse.
> >
> > Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> > Signed-off-by: David Carlier <devnexen@gmail.com>
>
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
>
> With your permission, I'll take these three patches in a follow-up
> series that fixes the module loading/unloading.

Yes please go ahead ! Cheers,

>
> I could also specify it as pre-requisite to b4, I'll see what's easier
>
> Thanks
>   j
>
> > ---
> >  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 11 ++++++++---
> >  1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > index c1a562cd214e..5cb59c70ffc9 100644
> > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > @@ -806,8 +806,10 @@ static int mali_c55_probe(struct platform_device *pdev)
> >       vb2_dma_contig_set_max_seg_size(dev, UINT_MAX);
> >
> >       ret = __mali_c55_power_on(mali_c55);
> > -     if (ret)
> > -             return dev_err_probe(dev, ret, "failed to power on\n");
> > +     if (ret) {
> > +             dev_err_probe(dev, ret, "failed to power on\n");
> > +             goto err_release_mem;
> > +     }
> >
> >       ret = mali_c55_check_hwcfg(mali_c55);
> >       if (ret)
> > @@ -846,6 +848,8 @@ static int mali_c55_probe(struct platform_device *pdev)
> >       kfree(mali_c55->context.registers);
> >  err_power_off:
> >       __mali_c55_power_off(mali_c55);
> > +err_release_mem:
> > +     of_reserved_mem_device_release(dev);
> >
> >       return ret;
> >  }
> > @@ -854,8 +858,9 @@ static void mali_c55_remove(struct platform_device *pdev)
> >  {
> >       struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
> >
> > -     kfree(mali_c55->context.registers);
> >       mali_c55_media_frameworks_deinit(mali_c55);
> > +     kfree(mali_c55->context.registers);
> > +     of_reserved_mem_device_release(&pdev->dev);
> >  }
> >
> >  static const struct of_device_id mali_c55_of_match[] = {
> > --
> > 2.53.0
> >
> >

Re: [PATCH v3 3/3] media: mali-c55: fix probe error path skipping pm_runtime_disable()

[David CARLIER]

On Fri, 27 Mar 2026 at 17:04, Jacopo Mondi
<jacopo.mondi@ideasonboard.com> wrote:
>
> Hi David
>
> On Fri, Mar 27, 2026 at 03:07:07PM +0000, David Carlier wrote:
> > When mali_c55_media_frameworks_init() fails, the goto target jumps to
> > err_free_context_registers, skipping pm_runtime_disable() despite
> > pm_runtime having already been enabled earlier in the function.
> >
> > Fix this by adding an err_pm_runtime_disable label and redirecting the
> > frameworks init failure to it, so pm_runtime is properly unwound on
> > that error path.
> >
> > Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> > Signed-off-by: David Carlier <devnexen@gmail.com>
> > ---
> >  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > index 38b11d5ba168..f998f914b355 100644
> > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > @@ -828,7 +828,7 @@ static int mali_c55_probe(struct platform_device *pdev)
> >
> >       ret = mali_c55_media_frameworks_init(mali_c55);
> >       if (ret)
> > -             goto err_free_context_registers;
> > +             goto err_pm_runtime_disable;
> >
> >       pm_runtime_idle(&pdev->dev);
> >
> > @@ -843,8 +843,8 @@ static int mali_c55_probe(struct platform_device *pdev)
> >
> >  err_deinit_media_frameworks:
> >       mali_c55_media_frameworks_deinit(mali_c55);
> > +err_pm_runtime_disable:
>
> Is it necessary to
>
>         pm_runtime_set_suspended(&pdev->dev);
>
> ?
>
> >       pm_runtime_disable(&pdev->dev);
> > -err_free_context_registers:
> >       kfree(mali_c55->context.registers);
> >  err_power_off:
> >       __mali_c55_power_off(mali_c55);
> > --

Hi,

  Good point — yes, pm_runtime_set_active() is called earlier in
probe, so the error unwind should also call pm_runtime_set_suspended()
to undo it and decrement the
  parent's usage count. Same applies to the remove path.

  I'll send a v4 with that added to both patches 2 and 3.

  Thanks for the review,
  David


> > 2.53.0
> >
> >

Re: [PATCH v3 2/3] media: mali-c55: add missing pm_runtime_disable() in remove

[Jacopo Mondi]

Hi David
  since you have to send a v4 anyway, would you care about also
powering off the device duing remove ?

I have a patch, but since you're already looking at this it doesn't
make much sense to pile another one on top.

Could you squash in the below suggestions ?

On Fri, Mar 27, 2026 at 06:01:29PM +0100, Jacopo Mondi wrote:
> Hi David
>
> On Fri, Mar 27, 2026 at 03:07:06PM +0000, David Carlier wrote:
> > pm_runtime_enable() is called during probe but mali_c55_remove() never
> > calls pm_runtime_disable(), leaving the device's runtime PM state
> > enabled after the driver is unbound.

I would use these as the commit message and the commit title:

    media: mali-c55: Power-off the peripheral in remove()

    The Mali C55 driver doesn't depend on PM. For this reason, if pm_runtime
    is not compiled in it is required to manually power-off the peripheral
    during the driver's remove() handler.

    Also pm_runtime_enable() is called during probe but mali_c55_remove() never
    calls pm_runtime_disable(), leaving the device's runtime PM state enabled
    after the driver is unbound.

    Manually power-off the peripheral in remove() if the peripheral has not
    been suspended using runtime_pm and disable runtime pm.

> >
> > Add the missing pm_runtime_disable() call to the remove path.
>
> The driver doesn't depend on PM, so we need to explicitly power-off
> the peripheral in remove() (and set the pm_runtime status to
> suspended)
>
> >
> > Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> > Signed-off-by: David Carlier <devnexen@gmail.com>
>
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
>
> This patch is however correct, I'll add the power-off on top.
>
> > ---
> >  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > index 5cb59c70ffc9..38b11d5ba168 100644
> > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > @@ -859,6 +859,7 @@ static void mali_c55_remove(struct platform_device *pdev)
> >  	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
> >
> >  	mali_c55_media_frameworks_deinit(mali_c55);

And this should become:

+       if (!pm_runtime_suspended(&pdev->dev)) {
+               __mali_c55_power_off(mali_c55);
+               pm_runtime_set_suspended(&pdev->dev);
+       }
> > +	pm_runtime_disable(&pdev->dev);

Otherwise, if you want to keep your patch simpler, I'll add a patch
for power-off on top.

Thanks
   j

> >  	kfree(mali_c55->context.registers);
> >  	of_reserved_mem_device_release(&pdev->dev);
> >  }
> > --
> > 2.53.0
> >
> >

Re: [PATCH v3 2/3] media: mali-c55: add missing pm_runtime_disable() in remove

[David CARLIER]

Hi sorry I missed your previous messages ok looking into it. Cheers.

On Sat, 28 Mar 2026 at 14:58, Jacopo Mondi
<jacopo.mondi@ideasonboard.com> wrote:
>
> Hi David
>   since you have to send a v4 anyway, would you care about also
> powering off the device duing remove ?
>
> I have a patch, but since you're already looking at this it doesn't
> make much sense to pile another one on top.
>
> Could you squash in the below suggestions ?
>
> On Fri, Mar 27, 2026 at 06:01:29PM +0100, Jacopo Mondi wrote:
> > Hi David
> >
> > On Fri, Mar 27, 2026 at 03:07:06PM +0000, David Carlier wrote:
> > > pm_runtime_enable() is called during probe but mali_c55_remove() never
> > > calls pm_runtime_disable(), leaving the device's runtime PM state
> > > enabled after the driver is unbound.
>
> I would use these as the commit message and the commit title:
>
>     media: mali-c55: Power-off the peripheral in remove()
>
>     The Mali C55 driver doesn't depend on PM. For this reason, if pm_runtime
>     is not compiled in it is required to manually power-off the peripheral
>     during the driver's remove() handler.
>
>     Also pm_runtime_enable() is called during probe but mali_c55_remove() never
>     calls pm_runtime_disable(), leaving the device's runtime PM state enabled
>     after the driver is unbound.
>
>     Manually power-off the peripheral in remove() if the peripheral has not
>     been suspended using runtime_pm and disable runtime pm.
>
> > >
> > > Add the missing pm_runtime_disable() call to the remove path.
> >
> > The driver doesn't depend on PM, so we need to explicitly power-off
> > the peripheral in remove() (and set the pm_runtime status to
> > suspended)
> >
> > >
> > > Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
> > > Signed-off-by: David Carlier <devnexen@gmail.com>
> >
> > Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> >
> > This patch is however correct, I'll add the power-off on top.
> >
> > > ---
> > >  drivers/media/platform/arm/mali-c55/mali-c55-core.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > > index 5cb59c70ffc9..38b11d5ba168 100644
> > > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> > > @@ -859,6 +859,7 @@ static void mali_c55_remove(struct platform_device *pdev)
> > >     struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
> > >
> > >     mali_c55_media_frameworks_deinit(mali_c55);
>
> And this should become:
>
> +       if (!pm_runtime_suspended(&pdev->dev)) {
> +               __mali_c55_power_off(mali_c55);
> +               pm_runtime_set_suspended(&pdev->dev);
> +       }
> > > +   pm_runtime_disable(&pdev->dev);
>
> Otherwise, if you want to keep your patch simpler, I'll add a patch
> for power-off on top.
>
> Thanks
>    j
>
> > >     kfree(mali_c55->context.registers);
> > >     of_reserved_mem_device_release(&pdev->dev);
> > >  }
> > > --
> > > 2.53.0
> > >
> > >