[PATCH v4 2/3] media: mali-c55: Power-off the peripheral in remove()

[David Carlier <devnexen@gmail.com>]

The Mali C55 driver doesn't depend on PM. For this reason, if pm_runtime
is not compiled in it is required to manually power-off the peripheral
during the driver's remove() handler.

Also pm_runtime_enable() is called during probe but mali_c55_remove()
never calls pm_runtime_disable(), leaving the device's runtime PM state
enabled after the driver is unbound.

Manually power-off the peripheral in remove() if the peripheral has not
been suspended using runtime_pm and disable runtime pm.

Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
---
 drivers/media/platform/arm/mali-c55/mali-c55-core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index 5cb59c70ffc9..cf238bdf65c8 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -859,6 +859,11 @@ static void mali_c55_remove(struct platform_device *pdev)
 	struct mali_c55 *mali_c55 = platform_get_drvdata(pdev);
 
 	mali_c55_media_frameworks_deinit(mali_c55);
+	if (!pm_runtime_suspended(&pdev->dev)) {
+		__mali_c55_power_off(mali_c55);
+		pm_runtime_set_suspended(&pdev->dev);
+	}
+	pm_runtime_disable(&pdev->dev);
 	kfree(mali_c55->context.registers);
 	of_reserved_mem_device_release(&pdev->dev);
 }
-- 
2.53.0