From: bod@kernel.org
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil@kernel.org>,
Loic Poulain <loic.poulain@oss.qualcomm.com>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
Gjorgji Rosikopulos <quic_grosikop@quicinc.com>,
Milen Mitkov <quic_mmitkov@quicinc.com>,
Depeng Shao <quic_depengs@quicinc.com>,
Yongsheng Li <quic_yon@quicinc.com>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, Bryan O'Donoghue <bod@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH v2 2/5] media: qcom: camss: Fix RDI streaming for CSID 340
Date: Tue, 07 Apr 2026 11:17:23 +0100 [thread overview]
Message-ID: <20260407-camss-rdi-fix-v2-2-66f6c600fcff@kernel.org> (raw)
In-Reply-To: <20260407-camss-rdi-fix-v2-0-66f6c600fcff@kernel.org>
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID 340 by separating VC and port. Fix to VC zero as a bugfix
we will look to properly populate the VC field with follow on patches
later.
Fixes: f0fc808a466a ("media: qcom: camss: Add CSID 340 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-340.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-340.c b/drivers/media/platform/qcom/camss/camss-csid-340.c
index 2b50f9b96a34e..2e189efef79c2 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-340.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-340.c
@@ -74,9 +74,9 @@ static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
writel_relaxed(!!enable, csid->base + CSID_RDI_CTRL(rdi));
}
-static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
+static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 port, u8 vc)
{
- struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
+ struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + port];
const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
csid->res->formats->nformats,
input_format->code);
@@ -95,7 +95,7 @@ static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8
*
* CID : VC 3:0 << 2 | DT_ID 1:0
*/
- dt_id = vc & 0x03;
+ dt_id = port & 0x03;
val = CSID_RDI_CFG0_DECODE_FORMAT_NOP; /* only for RDI path */
val |= FIELD_PREP(CSID_RDI_CFG0_DT_MASK, format->data_type);
@@ -105,10 +105,11 @@ static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8
if (enable)
val |= CSID_RDI_CFG0_ENABLE;
- dev_dbg(csid->camss->dev, "CSID%u: Stream %s (dt:0x%x vc=%u)\n",
- csid->id, enable ? "enable" : "disable", format->data_type, vc);
+ dev_dbg(csid->camss->dev, "CSID%u: Stream %s (dt:0x%x port=%u vc=%u)\n",
+ csid->id, enable ? "enable" : "disable", format->data_type,
+ port, vc);
- writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
+ writel_relaxed(val, csid->base + CSID_RDI_CFG0(port));
}
static void csid_configure_stream(struct csid_device *csid, u8 enable)
@@ -117,9 +118,10 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
__csid_configure_rx(csid, &csid->phy);
+ /* Loop through all enabled ports and configure a stream for each */
for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++) {
if (csid->phy.en_vc & BIT(i)) {
- __csid_configure_rdi_stream(csid, enable, i);
+ __csid_configure_rdi_stream(csid, enable, i, 0);
__csid_ctrl_rdi(csid, enable, i);
}
}
--
2.52.0
next prev parent reply other threads:[~2026-04-07 10:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-07 10:17 [PATCH v2 0/5] media: qcom: camss: Fix RDI streaming for various CSIDs bod
2026-04-07 10:17 ` [PATCH v2 1/5] media: qcom: camss: Fix RDI streaming for CSID 680 bod
2026-04-07 10:17 ` bod [this message]
2026-04-07 10:17 ` [PATCH v2 3/5] media: qcom: camss: Fix RDI streaming for CSID GEN2 bod
2026-04-07 10:17 ` [PATCH v2 4/5] media: qcom: camss: Fix RDI streaming for CSID GEN3 bod
2026-04-07 10:17 ` [PATCH v2 5/5] media: qcom: camss: csid: Rename en_vc to en_port bod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260407-camss-rdi-fix-v2-2-66f6c600fcff@kernel.org \
--to=bod@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=hverkuil+cisco@kernel.org \
--cc=hverkuil@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=mchehab@kernel.org \
--cc=quic_depengs@quicinc.com \
--cc=quic_grosikop@quicinc.com \
--cc=quic_mmitkov@quicinc.com \
--cc=quic_yon@quicinc.com \
--cc=rfoss@kernel.org \
--cc=stable@vger.kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox