Linux Media Controller development
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Cc: tomm.merciai@gmail.com, linux-renesas-soc@vger.kernel.org,
	biju.das.jz@bp.renesas.com, jacopo.mondi@ideasonboard.com,
	"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Hans Verkuil" <hverkuil+cisco@kernel.org>,
	"Nicolas Dufresne" <nicolas.dufresne@collabora.com>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Sven Püschel" <s.pueschel@pengutronix.de>,
	"Mehdi Djait" <mehdi.djait@linux.intel.com>,
	"Paul Cercueil" <paul@crapouillou.net>,
	"Isaac Scott" <isaac.scott@ideasonboard.com>,
	"Daniel Scally" <dan.scally+renesas@ideasonboard.com>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] media: v4l2-common: add v4l2_fill_pixfmt_aligned() helper
Date: Thu, 25 Jun 2026 11:51:59 +0300	[thread overview]
Message-ID: <20260625085159.GP851255@killaraus.ideasonboard.com> (raw)
In-Reply-To: <ajzjAVM8F8ZPMWcy@tom-desktop>

On Thu, Jun 25, 2026 at 10:12:49AM +0200, Tommaso Merciai wrote:
> Hi Laurent,
> Thanks for your review.
> 
> On Wed, Jun 24, 2026 at 10:28:55PM +0300, Laurent Pinchart wrote:
> > Hi Tommaso,
> > 
> > Thank you for the patch.
> > 
> > On Wed, Jun 24, 2026 at 12:41:30PM +0200, Tommaso Merciai wrote:
> > > Add v4l2_fill_pixfmt_aligned(), a variant of v4l2_fill_pixfmt()
> > > that accepts a stride_alignment parameter, mirroring the existing
> > > v4l2_fill_pixfmt_mp() / v4l2_fill_pixfmt_mp_aligned() pair.
> > > 
> > > v4l2_fill_pixfmt() is refactored to call v4l2_fill_pixfmt_aligned()
> > > with stride_alignment=1, preserving its existing behaviour.
> > > 
> > > The new helper is needed by drivers whose DMA engine requires the
> > > line stride to be a multiple of a specific value, such as the
> > > Renesas RZ/G3E CRU which requires 128-byte alignment.
> > > 
> > > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> > > ---
> > >  drivers/media/v4l2-core/v4l2-common.c | 17 +++++++++++++----
> > >  include/media/v4l2-common.h           |  3 +++
> > >  2 files changed, 16 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > > index 65db7340ad38..1de246acc7ab 100644
> > > --- a/drivers/media/v4l2-core/v4l2-common.c
> > > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > > @@ -545,8 +545,8 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt,
> > >  }
> > >  EXPORT_SYMBOL_GPL(v4l2_fill_pixfmt_mp);
> > >  
> > > -int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > > -		     u32 width, u32 height)
> > > +int v4l2_fill_pixfmt_aligned(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > > +			     u32 width, u32 height, u8 stride_alignment)
> > >  {
> > >  	const struct v4l2_format_info *info;
> > >  	int i;
> > > @@ -562,14 +562,23 @@ int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > >  	pixfmt->width = width;
> > >  	pixfmt->height = height;
> > >  	pixfmt->pixelformat = pixelformat;
> > > -	pixfmt->bytesperline = v4l2_format_plane_stride(info, 0, width, 1);
> > > +	pixfmt->bytesperline = v4l2_format_plane_stride(info, 0, width,
> > > +							stride_alignment);
> > >  	pixfmt->sizeimage = 0;
> > >  
> > >  	for (i = 0; i < info->comp_planes; i++)
> > >  		pixfmt->sizeimage +=
> > > -			v4l2_format_plane_size(info, i, width, height, 1);
> > > +			v4l2_format_plane_size(info, i, width, height,
> > > +					       stride_alignment);
> > >  	return 0;
> > >  }
> > > +EXPORT_SYMBOL_GPL(v4l2_fill_pixfmt_aligned);
> > > +
> > > +int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > > +		     u32 width, u32 height)
> > > +{
> > > +	return v4l2_fill_pixfmt_aligned(pixfmt, pixelformat, width, height, 1);
> > > +}
> > 
> > This could be an inline wrapper in include/media/v4l2-common.h, it would
> > be more efficient.
> 
> Ok, thanks.
> I guess we want the same for v4l2_fill_pixfmt_mp() ?

That would be nice, as a separate patch, if you have time.

> > >  EXPORT_SYMBOL_GPL(v4l2_fill_pixfmt);
> > >  
> > >  #ifdef CONFIG_MEDIA_CONTROLLER
> > > diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> > > index edd416178c33..718a0f47f36b 100644
> > > --- a/include/media/v4l2-common.h
> > > +++ b/include/media/v4l2-common.h
> > > @@ -556,6 +556,9 @@ void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
> > >  				    const struct v4l2_frmsize_stepwise *frmsize);
> > >  int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > >  		     u32 width, u32 height);
> > > +/* @stride_alignment is a power of 2 value in bytes */
> > > +int v4l2_fill_pixfmt_aligned(struct v4l2_pix_format *pixfmt, u32 pixelformat,
> > > +			     u32 width, u32 height, u8 stride_alignment);
> > 
> > I know the existing functions lack documentation, but it's not a reason
> > to continue with that bad habit :-)
> 
> Ouch :)
> 
> > One point that needs to be clearly documented is how the stride
> > alignment is handled for different planes.
> 
> Thanks, I will add documentation in v2.
> 
> > >  int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat,
> > >  			u32 width, u32 height);
> > >  /* @stride_alignment is a power of 2 value in bytes */

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-06-25  8:52 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-24 10:41 [PATCH 0/2] media: rzg2l-cru: Fix DMA stride alignment Tommaso Merciai
2026-06-24 10:41 ` [PATCH 1/2] media: v4l2-common: add v4l2_fill_pixfmt_aligned() helper Tommaso Merciai
2026-06-24 19:28   ` Laurent Pinchart
2026-06-25  8:12     ` Tommaso Merciai
2026-06-25  8:51       ` Laurent Pinchart [this message]
2026-06-24 10:41 ` [PATCH 2/2] media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement Tommaso Merciai
2026-06-24 19:53   ` Laurent Pinchart
2026-06-25 11:01     ` Tommaso Merciai
2026-06-26 20:08       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260625085159.GP851255@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=dan.scally+renesas@ideasonboard.com \
    --cc=hverkuil+cisco@kernel.org \
    --cc=isaac.scott@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mehdi.djait@linux.intel.com \
    --cc=nicolas.dufresne@collabora.com \
    --cc=paul@crapouillou.net \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=s.pueschel@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomm.merciai@gmail.com \
    --cc=tommaso.merciai.xr@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox