From: Fernando Rimoli <fernandorimoli11@gmail.com>
To: linux-media@vger.kernel.org
Cc: sakari.ailus@linux.intel.com, dan.scally@ideasonboard.com,
linux-kernel@vger.kernel.org,
Fernando Rimoli <fernandorimoli11@gmail.com>,
Jakob Berg Jespersen <dev@berg.pm>,
Fil Dunsky <filipp.dunsky@gmail.com>,
Lucas Lis <lucaseze.lis@gmail.com>,
Kengo Oki <dev.kengo.fugu0141@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v5 7/7] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6
Date: Wed, 2 Sep 2026 16:23:21 +0200 [thread overview]
Message-ID: <20260902142322.73523-8-fernandorimoli11@gmail.com> (raw)
In-Reply-To: <20260902142322.73523-1-fernandorimoli11@gmail.com>
The ov5693 (INT33BE / OVTI5693) needs its MIPI clock lane gated while
idle for the IPU6 CSI-2 receiver to lock onto the link, which the sensor
driver does when the endpoint requests a non-continuous clock.
The same sensor works with a free-running clock on the IPU3, so request
it only for the IPU6 variants where it has been confirmed on hardware:
Tiger Lake, Alder Lake-P and Alder Lake-N.
Signed-off-by: Fernando Rimoli <fernandorimoli11@gmail.com>
Tested-by: Jakob Berg Jespersen <dev@berg.pm> # Surface Pro 7+, IPU6 Tiger Lake
Tested-by: Fil Dunsky <filipp.dunsky@gmail.com> # Surface Pro 8, IPU6 Tiger Lake (8086:9a19)
Tested-by: Lucas Lis <lucaseze.lis@gmail.com> # Surface Pro 7+, IPU6 Tiger Lake (0x9a19)
Tested-by: Kengo Oki <dev.kengo.fugu0141@gmail.com> # Surface Go 4, IPU6 Alder Lake-N 8086:462e
---
drivers/media/pci/intel/ipu-bridge.c | 19 +++++++++++++++++++
include/media/ipu-bridge.h | 5 +++++
2 files changed, 24 insertions(+)
diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 5efdcb9c8..12f1cccd8 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -16,6 +16,7 @@
#include <linux/workqueue.h>
#include <media/ipu-bridge.h>
+#include <media/ipu6-pci-table.h>
#include <media/v4l2-fwnode.h>
#define ADEV_DEV(adev) ACPI_PTR(&((adev)->dev))
@@ -49,6 +50,14 @@
*
* Please keep the list sorted by ACPI HID.
*/
+/* IPU6 variants whose CSI-2 receiver needs the ov5693 clock lane gated */
+static const u16 ipu6_ov5693_ncont_clk[] = {
+ PCI_DEVICE_ID_INTEL_IPU6, /* Tiger Lake */
+ PCI_DEVICE_ID_INTEL_IPU6EP_ADLP, /* Alder Lake-P */
+ PCI_DEVICE_ID_INTEL_IPU6EP_ADLN, /* Alder Lake-N */
+ 0
+};
+
static const struct ipu_sensor_config ipu_supported_sensors[] = {
/* Himax HM1092 */
IPU_SENSOR_CONFIG("HIMX1092", 2, 180000000, 180480000),
@@ -61,6 +70,9 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
/* GalaxyCore GC0310 */
IPU_SENSOR_CONFIG("INT0310", 1, 55692000),
/* Omnivision OV5693 */
+ IPU_SENSOR_CONFIG_MATCH_FL("INT33BE", ipu6_ov5693_ncont_clk,
+ IPU_BR_FL_CSI2_CLK_NONCONTINUOUS,
+ 1, 419200000),
IPU_SENSOR_CONFIG("INT33BE", 1, 419200000),
/* Onsemi MT9M114 */
IPU_SENSOR_CONFIG("INT33F0", 1, 384000000),
@@ -97,6 +109,9 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
/* Omnivision OV5675 */
IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
/* Omnivision OV5693 */
+ IPU_SENSOR_CONFIG_MATCH_FL("OVTI5693", ipu6_ov5693_ncont_clk,
+ IPU_BR_FL_CSI2_CLK_NONCONTINUOUS,
+ 1, 419200000),
IPU_SENSOR_CONFIG("OVTI5693", 1, 419200000),
/* Omnivision OV8856 */
IPU_SENSOR_CONFIG("OVTI8856", 3, 180000000, 360000000, 720000000),
@@ -526,6 +541,10 @@ static void ipu_bridge_create_fwnode_properties(
cfg->link_freqs,
cfg->nr_link_freqs);
+ if (cfg->flags & IPU_BR_FL_CSI2_CLK_NONCONTINUOUS)
+ sensor->ep_properties[IPU_BRIDGE_NEXT_PROPERTY(i, EP_CLOCK_NONCONTINUOUS)] =
+ PROPERTY_ENTRY_BOOL("clock-noncontinuous");
+
sensor->ipu_properties[0] = PROPERTY_ENTRY_U32_ARRAY_LEN(
sensor->prop_names.data_lanes,
bridge->data_lanes, sensor->lanes);
diff --git a/include/media/ipu-bridge.h b/include/media/ipu-bridge.h
index aca76ff71..eec8c4688 100644
--- a/include/media/ipu-bridge.h
+++ b/include/media/ipu-bridge.h
@@ -17,6 +17,10 @@
#define IPU_SENSOR_ROTATION_NORMAL 0
#define IPU_SENSOR_ROTATION_INVERTED 1
+/* Flags for struct ipu_sensor_config */
+/* The sensor's CSI-2 transmitter needs a non-continuous clock */
+#define IPU_BR_FL_CSI2_CLK_NONCONTINUOUS BIT(0)
+
/*
* Sensor config specific to one or more IPUs, identified by their PCI product
* IDs, with flags describing what the sensor needs there. Entries for one HID
@@ -80,6 +84,7 @@ enum ipu_bridge_ep_props {
IPU_BRIDGE_EP_DATA_LANES,
IPU_BRIDGE_EP_REMOTE_EP,
IPU_BRIDGE_EP_LINK_FREQUENCIES,
+ IPU_BRIDGE_EP_CLOCK_NONCONTINUOUS,
IPU_BRIDGE_EP_NUM_OF,
IPU_BRIDGE_EP_NUM_ENTRIES
};
--
2.43.0
prev parent reply other threads:[~2026-09-02 14:24 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 21:36 [PATCH] media: ov5693: add OVTI5693 ACPI HID for IPU6 Surface devices Fernando Rimoli
2026-07-09 13:17 ` Dan Scally
2026-07-14 9:32 ` Sakari Ailus
2026-07-17 13:20 ` [PATCH v2 0/3] media: Enable the OV5693 front camera on " Fernando Rimoli
2026-07-17 13:20 ` [PATCH v2 1/3] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-07-17 13:20 ` [PATCH v2 2/3] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-07-17 13:20 ` [PATCH v2 3/3] media: i2c: ov5693: Gate the MIPI clock lane for IPU6 Fernando Rimoli
2026-07-19 16:25 ` Jakob Berg Jespersen
2026-07-19 22:42 ` Sakari Ailus
2026-07-20 16:38 ` [PATCH v3 0/4] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-07-20 16:38 ` [PATCH v3 1/4] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-07-20 16:38 ` [PATCH v3 2/4] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-07-20 21:09 ` Dan Scally
2026-07-20 16:38 ` [PATCH v3 3/4] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-07-20 21:49 ` Dan Scally
2026-07-30 7:46 ` Sakari Ailus
2026-08-31 18:16 ` Fernando Rimoli
2026-07-20 16:38 ` [PATCH v3 4/4] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6 Fernando Rimoli
2026-07-20 21:56 ` Dan Scally
2026-07-20 23:50 ` Fernando Rimoli
2026-07-30 7:32 ` Sakari Ailus
2026-08-31 18:17 ` Fernando Rimoli
2026-08-31 18:18 ` Fernando Rimoli
2026-08-31 18:18 ` [PATCH v4 0/6] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-08-31 18:18 ` [PATCH v4 1/6] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-08-31 18:18 ` [PATCH v4 2/6] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-08-31 18:18 ` [PATCH v4 3/6] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-09-01 9:32 ` Jakob Berg Jespersen
2026-09-01 9:56 ` Fernando Rimoli
2026-09-01 16:34 ` Fernando Rimoli
2026-09-01 18:32 ` Jakob Berg Jespersen
2026-09-01 18:46 ` Fil Dunsky
2026-09-02 7:27 ` Sakari Ailus
2026-08-31 18:18 ` [PATCH v4 4/6] media: ipu-bridge: Assign endpoint property indices dynamically Fernando Rimoli
2026-09-02 6:33 ` Sakari Ailus
2026-08-31 18:18 ` [PATCH v4 5/6] media: ipu-bridge: Match sensor configs per IPU and add config flags Fernando Rimoli
2026-09-01 9:57 ` Fernando Rimoli
2026-09-02 6:42 ` Sakari Ailus
2026-08-31 18:18 ` [PATCH v4 6/6] media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6 Fernando Rimoli
2026-09-02 4:42 ` Kengo Oki
2026-09-02 14:23 ` [PATCH v5 0/7] media: Enable the OV5693 front camera on IPU6 Surface devices Fernando Rimoli
2026-09-02 14:23 ` [PATCH v5 1/7] media: i2c: ov5693: Add OVTI5693 ACPI HID Fernando Rimoli
2026-09-02 14:23 ` [PATCH v5 2/7] media: ipu-bridge: Add OVTI5693 to the list of supported sensors Fernando Rimoli
2026-09-02 14:23 ` [PATCH v5 3/7] dt-bindings: media: ov5693: Add clock-noncontinuous Fernando Rimoli
2026-09-02 17:27 ` Conor Dooley
2026-09-02 14:23 ` [PATCH v5 4/7] media: i2c: ov5693: Gate the MIPI clock lane for non-continuous clock Fernando Rimoli
2026-09-02 19:11 ` Fil Dunsky
2026-09-02 14:23 ` [PATCH v5 5/7] media: ipu-bridge: Assign endpoint property indices dynamically Fernando Rimoli
2026-09-02 14:23 ` [PATCH v5 6/7] media: ipu-bridge: Match sensor configs per IPU and add config flags Fernando Rimoli
2026-09-02 14:23 ` Fernando Rimoli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260902142322.73523-8-fernandorimoli11@gmail.com \
--to=fernandorimoli11@gmail.com \
--cc=dan.scally@ideasonboard.com \
--cc=dev.kengo.fugu0141@gmail.com \
--cc=dev@berg.pm \
--cc=filipp.dunsky@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lucaseze.lis@gmail.com \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox