[PATCH v1 2/4] media: ipu6: Always run cleanup in ipu7 power on/off on timeout

[Manik Bajpai <manik.bajpai@intel.com>]

__ipu7_power_on() and __ipu7_power_off() both return early when the
pwr_status readl_poll_timeout() call times out, skipping cleanup that
was previously done only on the success path:

 - __ipu7_power_on() left the clock-ownership override bit set in
   SLEEP_LEVEL_CFG instead of clearing it, which could break
   subsequent power transitions.

 - __ipu7_power_off() skipped D2D power-down and NDE-disable, leaving
   those subsystems powered despite reporting a failure.

 - Additionally, the return value of ipu7_isys_d2d_power() in
   __ipu7_power_off() was discarded, silently masking D2D power-down
   failures.

Always run the clock-override clear / D2D-NDE teardown regardless of
whether the status poll timed out, and propagate a D2D power-down
failure through the return value when the poll itself succeeded.

Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Manik Bajpai <manik.bajpai@intel.com>
---
 drivers/media/pci/intel/ipu6/ipu6-buttress.c | 24 ++++++++++++--------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/media/pci/intel/ipu6/ipu6-buttress.c b/drivers/media/pci/intel/ipu6/ipu6-buttress.c
index 105de1744dff..06a773b5b66b 100644
--- a/drivers/media/pci/intel/ipu6/ipu6-buttress.c
+++ b/drivers/media/pci/intel/ipu6/ipu6-buttress.c
@@ -530,16 +530,15 @@ static int __ipu7_power_on(struct device *dev,
 	ret = readl_poll_timeout(isp->base + isp->buttress.regs->pwr_status,
 				 val, (val & ctrl->pwr_sts_mask) == pwr_sts,
 				 100, BUTTRESS_POWER_TIMEOUT_US);
-	if (ret) {
+	if (ret)
 		dev_err(&isp->pdev->dev,
 			"Change power status timeout with 0x%x\n", val);
-		return ret;
-	}
 
+	/* Always drop the clock override, even if the poll above timed out. */
 	slp = readl(isp->base + IPU7_BUTTRESS_REG_SLEEP_LEVEL_CFG);
 	writel(slp & ~ovrd_clk, isp->base + IPU7_BUTTRESS_REG_SLEEP_LEVEL_CFG);
 
-	return 0;
+	return ret;
 }
 
 static int __ipu7_power_off(struct device *dev,
@@ -555,18 +554,25 @@ static int __ipu7_power_off(struct device *dev,
 	ret = readl_poll_timeout(isp->base + isp->buttress.regs->pwr_status,
 				 val, (val & ctrl->pwr_sts_mask) == pwr_sts,
 				 100, BUTTRESS_POWER_TIMEOUT_US);
-	if (ret) {
+	if (ret)
 		dev_err(&isp->pdev->dev,
 			"Change power status timeout with 0x%x\n", val);
-		return ret;
-	}
 
+	/* Always release D2D/NDE, even if the power status poll timed out. */
 	if (ctrl->subsys_id == IPU_ISYS) {
-		ipu7_isys_d2d_power(isp, false);
+		int d2d_ret;
+
+		d2d_ret = ipu7_isys_d2d_power(isp, false);
+		if (d2d_ret) {
+			dev_err(&isp->pdev->dev,
+				"D2D power down failed (%d)\n", d2d_ret);
+			if (!ret)
+				ret = d2d_ret;
+		}
 		ipu7_nde_control(isp, false);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int __ipu6_power(struct device *dev,
-- 
2.53.0