Linux Media Controller development
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: hans@jjverkuil.nl, laurent.pinchart@ideasonboard.com,
	Prabhakar <prabhakar.csengg@gmail.com>,
	"Kate Hsuan" <hpa@redhat.com>,
	"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
	"Tommaso Merciai" <tomm.merciai@gmail.com>,
	"Benjamin Mugnier" <benjamin.mugnier@foss.st.com>,
	"Sylvain Petinot" <sylvain.petinot@foss.st.com>,
	"Christophe JAILLET" <christophe.jaillet@wanadoo.fr>,
	"Julien Massot" <julien.massot@collabora.com>,
	"Naushir Patuck" <naush@raspberrypi.com>,
	"Yan, Dongcheng" <dongcheng.yan@intel.com>,
	"Stefan Klug" <stefan.klug@ideasonboard.com>,
	"Mirela Rabulea" <mirela.rabulea@nxp.com>,
	"André Apitzsch" <git@apitzsch.eu>,
	"Heimir Thor Sverrisson" <heimir.sverrisson@gmail.com>,
	"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
	"Mehdi Djait" <mehdi.djait@linux.intel.com>,
	"Ricardo Ribalda Delgado" <ribalda@kernel.org>,
	"Hans de Goede" <hansg@kernel.org>,
	"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>,
	"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
	"David Plowman" <david.plowman@raspberrypi.com>,
	"Yu, Ong Hock" <ong.hock.yu@intel.com>,
	"Ng, Khai Wen" <khai.wen.ng@intel.com>,
	"Jai Luthra" <jai.luthra@ideasonboard.com>,
	"Rishikesh Donadkar" <r-donadkar@ti.com>,
	"Mattijs Korpershoek" <mkorpershoek@kernel.org>,
	"Antti Laakso" <antti.laakso@linux.intel.com>,
	"Bajpai, Manik" <manik.bajpai@intel.com>,
	"Divyamani Tripathi" <divyamani.tripathi@intel.com>
Subject: [PATCH v13 66/73] media: imx219: Support LINE_LENGTH_PIXELS and FRAME_LENGTH_LINES controls
Date: Wed, 18 Nov 2026 15:28:12 +0200	[thread overview]
Message-ID: <20261118132819.213473-67-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20261118132819.213473-1-sakari.ailus@linux.intel.com>

Support V4L2_CID_LINE_LENGTH_PIXELS and V4L2_CID_FRAME_LENGTH_LINES
controls. These two controls provide direct access to sensor's line and
frame lengths, without requiring a reference crop rectangle.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/imx219.c  | 171 +++++++++++++++++++++++-------------
 include/media/v4l2-common.h |   3 +
 2 files changed, 112 insertions(+), 62 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 0b0fbc082e18..bb3682be1c9f 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -399,12 +399,17 @@ struct imx219 {
 	struct v4l2_ctrl *exposure;
 	struct v4l2_ctrl *vflip;
 	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *fll;
 	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *llp;
 	struct v4l2_ctrl *hblank;
 	struct v4l2_ctrl *binning;
 
 	/* Two or Four lanes */
 	u8 lanes;
+
+	/* For handling frame timing dependencies. */
+	bool setting_ctrl;
 };
 
 static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd)
@@ -486,9 +491,10 @@ enum imx219_binning_factor_indices {
 
 static const struct {
 	u8 h, v;
+	u16 llp_min;
 } imx219_binnings[] = {
-	[IMX219_BINNING_11] = { IMX219_BINNING_NONE, IMX219_BINNING_NONE, },
-	[IMX219_BINNING_22] = { IMX219_BINNING_X2_ANALOG, IMX219_BINNING_X2_ANALOG, },
+	[IMX219_BINNING_11] = { IMX219_BINNING_NONE, IMX219_BINNING_NONE, IMX219_LLP_MIN, },
+	[IMX219_BINNING_22] = { IMX219_BINNING_X2_ANALOG, IMX219_BINNING_X2_ANALOG, IMX219_BINNED_LLP_MIN, },
 };
 
 static const s64 imx219_binning_factors[] = {
@@ -502,8 +508,10 @@ static inline u32 imx219_get_rate_factor(struct imx219 *imx219)
 		IMX219_BINNING_X2_ANALOG ? 2 : 1;
 }
 
-static void imx219_apply_binning(struct v4l2_subdev_state *state,
-				 struct v4l2_rect *crop, unsigned int index)
+static int imx219_apply_binning(struct imx219 *imx219,
+				struct v4l2_subdev_state *state,
+				struct v4l2_rect *crop, int rate_factor,
+				unsigned int index)
 {
 	struct v4l2_rect *compose =
 		v4l2_subdev_state_get_compose(state, IMX219_PAD_IMAGE);
@@ -514,6 +522,7 @@ static void imx219_apply_binning(struct v4l2_subdev_state *state,
 		v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE,
 					     IMX219_STREAM_EDATA);
 	s64 binning = imx219_binning_factors[index];
+	int ret;
 
 	crop->width = clamp(crop->width, IMX219_OUTPUT_X_SIZE_MIN *
 			    V4L2_BINNING_FACTORS_HNUM(binning),
@@ -539,6 +548,33 @@ static void imx219_apply_binning(struct v4l2_subdev_state *state,
 
 	embedded_format->width =
 		embedded_source_format->width = source_format->width;
+
+	int fll_min = IMX219_VBLANK_MIN + source_format->height;
+	ret = __v4l2_ctrl_modify_range(imx219->fll, fll_min, IMX219_FLL_MAX,
+				       rate_factor, fll_min);
+	if (ret)
+		return ret;
+
+	int vblank_min = IMX219_VBLANK_MIN;
+	ret = __v4l2_ctrl_modify_range(imx219->vblank,
+				       vblank_min,
+				       IMX219_FLL_MAX - source_format->height,
+				       rate_factor, vblank_min);
+	if (ret)
+		return ret;
+
+	int llp_min = imx219_binnings[index].llp_min;
+	ret = __v4l2_ctrl_modify_range(imx219->llp, llp_min, IMX219_LLP_MAX,
+				       IMX219_LLP_STEP, llp_min);
+	if (ret)
+		return ret;
+
+	return __v4l2_ctrl_modify_range(imx219->hblank,
+					llp_min - (int)source_format->width,
+					IMX219_LLP_MAX -
+					(int)source_format->width,
+					IMX219_LLP_STEP,
+					llp_min - (int)source_format->width);
 }
 
 static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
@@ -557,35 +593,27 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 	rate_factor = imx219_get_rate_factor(imx219);
 
 	switch (ctrl->id) {
-	case V4L2_CID_VBLANK: {
-		int exposure_max, exposure_def;
-
-		/* Update max exposure while meeting expected vblanking */
-		exposure_max = format->height + ctrl->val -
-			IMX219_EXPOSURE_OFFSET * rate_factor;
-		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
-				exposure_max : IMX219_EXPOSURE_DEFAULT;
-		ret = __v4l2_ctrl_modify_range(imx219->exposure,
-					       imx219->exposure->minimum,
-					       exposure_max,
-					       rate_factor, exposure_def);
+	case V4L2_CID_FRAME_LENGTH_LINES:
+	case V4L2_CID_VBLANK:
+	case V4L2_CID_LINE_LENGTH_PIXELS:
+	case V4L2_CID_HBLANK:
+		ret = v4l2_sensor_fll_llp_set(imx219->fll, imx219->vblank,
+					      imx219->llp, imx219->hblank,
+					      imx219->exposure, format, ctrl,
+					      &imx219->setting_ctrl,
+					      IMX219_EXPOSURE_OFFSET *
+					      rate_factor);
 		if (ret)
 			return ret;
 		break;
-	}
 	case V4L2_CID_BINNING_FACTORS: {
 		struct v4l2_rect *crop =
 			v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE);
 
-		cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_H,
-			  imx219_binnings[ctrl->val].h, &ret);
-		cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_V,
-			  imx219_binnings[ctrl->val].v, &ret);
-
-		if (ctrl->val != ctrl->cur.val)
-			imx219_apply_binning(state, crop, ctrl->val);
-
-		return 0;
+		ret = imx219_apply_binning(imx219, state, crop, rate_factor,
+					   ctrl->val);
+		if (ret)
+			return ret;
 	}
 	}
 
@@ -618,13 +646,22 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 		cci_write(imx219->regmap, IMX219_REG_ORIENTATION,
 			  imx219->hflip->val | imx219->vflip->val << 1, &ret);
 		break;
-	case V4L2_CID_VBLANK:
+	case V4L2_CID_FRAME_LENGTH_LINES:
 		cci_write(imx219->regmap, IMX219_REG_FRM_LENGTH_A,
-			  (format->height + ctrl->val) / rate_factor, &ret);
+			  ctrl->val / rate_factor, &ret);
 		break;
+	case V4L2_CID_LINE_LENGTH_PIXELS:
+		cci_write(imx219->regmap, IMX219_REG_LINE_LENGTH_A, ctrl->val,
+			  &ret);
+		break;
+	case V4L2_CID_VBLANK:
 	case V4L2_CID_HBLANK:
-		cci_write(imx219->regmap, IMX219_REG_LINE_LENGTH_A,
-			  format->width + ctrl->val, &ret);
+		break;
+	case V4L2_CID_BINNING_FACTORS:
+		cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_H,
+			  imx219_binnings[ctrl->val].h, &ret);
+		cci_write(imx219->regmap, IMX219_REG_BINNING_MODE_V,
+			  imx219_binnings[ctrl->val].v, &ret);
 		break;
 	case V4L2_CID_TEST_PATTERN_RED:
 		cci_write(imx219->regmap, IMX219_REG_TESTP_RED,
@@ -699,10 +736,19 @@ static int imx219_init_controls(struct imx219 *imx219)
 		imx219->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
 	/* Initial blanking and exposure. Limits are updated during set_fmt */
+	imx219->fll = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					V4L2_CID_FRAME_LENGTH_LINES,
+					IMX219_ACTIVE_AREA_HEIGHT +
+					IMX219_VBLANK_MIN, IMX219_FLL_MAX, 1,
+					mode->fll_def);
 	imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
 					   IMX219_FLL_MAX - mode->height, 1,
 					   mode->fll_def - mode->height);
+	imx219->llp = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					V4L2_CID_LINE_LENGTH_PIXELS,
+					IMX219_LLP_MIN, IMX219_LLP_MAX, 1,
+					IMX219_LLP_MIN);
 	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_HBLANK,
 					   IMX219_LLP_MIN - mode->width,
@@ -782,6 +828,11 @@ static int imx219_init_controls(struct imx219 *imx219)
 		goto error;
 	}
 
+	imx219->fll->flags |= V4L2_CTRL_FLAG_UPDATE;
+	imx219->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+	imx219->llp->flags |= V4L2_CTRL_FLAG_UPDATE;
+	imx219->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
+
 	ret = v4l2_fwnode_device_parse(&client->dev, &props);
 	if (ret)
 		goto error;
@@ -1141,39 +1192,39 @@ static int imx219_set_pad_format_compat(struct v4l2_subdev *sd,
 		IMX219_ACTIVE_AREA_TOP;
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		int exposure_max;
-		int exposure_def;
-		int llp_min;
+		unsigned int binning = bin_hv == 1 ?
+			IMX219_BINNING_11 : IMX219_BINNING_22;
 		int pixel_rate;
 
-		ret = __v4l2_ctrl_s_ctrl(imx219->binning, bin_hv == 1 ?
-					 IMX219_BINNING_11 : IMX219_BINNING_22);
+		ret = __v4l2_ctrl_s_ctrl(imx219->binning, binning);
+		if (ret)
+			return ret;
+
+		int rate_factor = imx219_get_rate_factor(imx219);
+		ret = imx219_apply_binning(imx219, state, crop, rate_factor,
+					   binning);
 		if (ret)
 			return ret;
 
 		/* Update limits and set FPS to default */
-		ret = __v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
-					       IMX219_FLL_MAX - mode->height,
+		ret = __v4l2_ctrl_modify_range(imx219->vblank,
+					       imx219->vblank->minimum,
+					       imx219->vblank->maximum,
 					       rate_factor,
 					       mode->fll_def - mode->height);
 		if (ret)
 			return ret;
 
-		ret = __v4l2_ctrl_s_ctrl(imx219->vblank,
-					 mode->fll_def - mode->height);
+		ret = __v4l2_ctrl_modify_range(imx219->fll,
+					       imx219->fll->minimum,
+					       imx219->fll->maximum,
+					       rate_factor,
+					       mode->fll_def);
 		if (ret)
 			return ret;
 
-		/* Update max exposure while meeting expected vblanking */
-		int rate_factor = imx219_get_rate_factor(imx219);
-		exposure_max = mode->fll_def -
-			IMX219_EXPOSURE_OFFSET * rate_factor;
-		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
-				exposure_max : IMX219_EXPOSURE_DEFAULT;
-		ret = __v4l2_ctrl_modify_range(imx219->exposure,
-					       imx219->exposure->minimum,
-					       exposure_max,
-					       rate_factor, exposure_def);
+		ret = __v4l2_ctrl_s_ctrl(imx219->vblank,
+					 mode->fll_def - mode->height);
 		if (ret)
 			return ret;
 
@@ -1183,18 +1234,9 @@ static int imx219_set_pad_format_compat(struct v4l2_subdev *sd,
 		 * operates on two lines together. So we switch to a higher
 		 * minimum of 3560.
 		 */
-		llp_min = imx219_binnings[imx219->binning->val].h ==
-			IMX219_BINNING_X2_ANALOG ?
-			IMX219_BINNED_LLP_MIN : IMX219_LLP_MIN;
-		ret = __v4l2_ctrl_modify_range(imx219->hblank,
-					       llp_min - mode->width,
-					       IMX219_LLP_MAX - mode->width,
-					       IMX219_LLP_STEP,
-					       llp_min - mode->width);
-		if (ret)
-			return ret;
-
-		ret = __v4l2_ctrl_s_ctrl(imx219->hblank, llp_min - mode->width);
+		ret = __v4l2_ctrl_s_ctrl(imx219->hblank,
+					 imx219_binnings[binning].llp_min -
+					 mode->width);
 		if (ret)
 			return ret;
 
@@ -1322,8 +1364,13 @@ static int imx219_set_selection(struct v4l2_subdev *sd,
 		struct imx219 *imx219 = to_imx219(sd);
 		struct v4l2_rect *crop =
 			v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE);
+		int ret;
 
-		imx219_apply_binning(state, &sel->r, imx219->binning->val);
+		ret = imx219_apply_binning(imx219, state, &sel->r,
+					   imx219_get_rate_factor(imx219),
+					   imx219->binning->val);
+		if (ret)
+			return ret;
 
 		*crop = sel->r;
 
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index d29575a9f137..bd244c00d91a 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -17,6 +17,9 @@
 #include <linux/time.h>
 #include <media/v4l2-dev.h>
 
+struct v4l2_ctrl;
+struct v4l2_mbus_framefmt;
+
 /* Common printk constructs for v4l-i2c drivers. These macros create a unique
    prefix consisting of the driver name, the adapter number and the i2c
    address. */
-- 
2.47.3


  parent reply	other threads:[~2026-11-18 13:28 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18 13:27 [PATCH v13 00/72] Generic line based metadata support, internal pads Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 01/73] media: uapi: Bump the STREAMS bit a little Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 02/73] Revert "media: mc: Keep INTERNAL pad flags just for the kernel, for now" Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 03/73] media: uapi: Add generic CSI-2 raw pixelformats Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 04/73] media: uapi: Add new media bus codes for generic raw formats Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 05/73] media: uapi: Add V4L2_CID_CONFIG_MODEL control Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 06/73] media: uapi: Add V4L2_CID_CFA_PATTERN for describing color patterns Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 07/73] media: uapi: Add monochromatic CFA pattern Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 08/73] media: Documentation: Reference CFA pattern control in pixelformat docs Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 09/73] media: Documentation: Reference CFA_PATTERN control in raw mbus docs Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 10/73] media: v4l: uapi: Add a control for color pattern flipping effect Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 11/73] media: Documentation: Reference flipping controls in raw format docs Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 12/73] media: Documentation: Document raw mbus codes and CFA for cameras Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 13/73] media: uapi: Add V4L2_CID_METADATA_LAYOUT control Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 14/73] media: Documentation: Refer to metadata layout in metadata documentation Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 15/73] media: Documentation: v4l: Document internal sink pads Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 16/73] media: Documentation: Document embedded data guidelines for camera sensors Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 17/73] media: uapi: Correct generic CSI-2 metadata format 4cc Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 18/73] Revert "media: uapi: v4l: Don't expose generic metadata formats to userspace" Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 19/73] media: v4l: Add V4L2_SUBDEV_ROUTE_FL_IMMUTABLE sub-device routing flag Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 20/73] media: v4l: Add V4L2_SUBDEV_ROUTE_FL_STATIC " Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 21/73] media: Documentation: There are either immutable or mutable routes Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 22/73] media: Documentation: Document IMMUTABLE and STATIC route flags Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 23/73] media: Documentation: Add subdev configuration models, raw sensor model Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 24/73] media: v4l2-subdev: Prevent accessing internal pads without STREAMS cap Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 25/73] media: subdev: Make get_fmt on INTERNAL pads without STREAMS an error Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 26/73] media: Documentation: Add scaling and post-scaler crop for common raw Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 27/73] media: uapi: Add MIPI CCS configuration model Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 28/73] media: uapi: Add V4L2_SUBDEV_CLIENT_CAP_COMMON_RAW_SENSOR Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 29/73] media: uapi: Add V4L2_CID_BINNING_FACTORS control for binning configuration Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 30/73] media: uapi: Add controls for sub-sampling configuration Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 31/73] media: uapi: Add new controls for camera sensor FLL and LLP Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 32/73] media: v4l2-common: Add v4l2_sensor_fll_llp_set() Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 33/73] media: Documentation: Add binning and sub-sampling controls Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 34/73] media: v4l2-subdev: Set STATIC route flag if IMMUTABLE route flag is set Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 35/73] media: uapi: v4l: subdev: Enable streams API Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 36/73] media: uapi: Add binning factor helper macros Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 37/73] media: Documentation: Document frame controls for common raw sensor model Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 38/73] media: v4l2-ctrl: Improve v4l2_ctrl_g_ctrl{,int64} documentation Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 39/73] media: Documentation: Add sub-device internal pads example Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 40/73] media: Documentation: Document streaming behaviour for common raw cameras Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 41/73] media: Documentation: Add a note on Bayer raw mbus codes Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 42/73] media: uapi: Add generic raw pixelformats for 10, 12 and 14 bits Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 43/73] media: uapi: Add more media bus codes for generic raw formats Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 44/73] media: uapi: ccs: Add metadata layout for MIPI CCS embedded data Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 45/73] media: Documentation: Document non-CCS use of CCS embedded data layout Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 46/73] media: ccs: Add support for generic raw mbus codes Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 47/73] media: ccs: Add support for embedded data stream Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 48/73] media: Documentation: ccs: Document routing Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 49/73] media: ccs: Add IMMUTABLE and STATIC route flags Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 50/73] media: uapi: Add metadata layout for ov2740 embedded data Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 51/73] media: ov2740: Add support for " Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 52/73] media: ov2740: Add support for generic raw formats Sakari Ailus
2026-11-18 13:27 ` [PATCH v13 53/73] media: ov2740: Add metadata layout control Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 54/73] media: ov2740: Add support for G_SELECTION IOCTL Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 55/73] media: ov2740: Add support for FLL and LLP controls Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 56/73] media: ov2740: Signal common raw sensor model support Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 57/73] media: ov2740: Add IMMUTABLE and STATIC route flags Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 58/73] media: imx219: Add internal image pad for Common Raw Sensor Model Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 59/73] media: imx219: Add image stream Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 60/73] media: imx219: Report internal routes to userspace Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 61/73] media: imx219: Report streams using frame descriptors Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 62/73] media: imx219: Add embedded data support Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 63/73] media: imx219: Add support for generic raw formats Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 64/73] media: imx219: Add V4L2_CID_BINNING_FACTORS Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 65/73] media: imx219: Allow configuring cropping and binning through CRSM Sakari Ailus
2026-11-18 13:28 ` Sakari Ailus [this message]
2026-11-18 13:28 ` [PATCH v13 67/73] media: v4l2-common: Add helper function media_bus_fmt_to_csi2_(bpp|dt)() Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 68/73] media: bcm2835-unicam: Support generic raw formats Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 69/73] media: ipu6: Add support for raw CFA-agnostic formats Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 70/73] media: ipu6: Add support for generic unpacked pixel and metadata formats Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 71/73] Documentation: media: Reword blanking control documentation Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 72/73] media: uapi: Add generic raw pixelformat for 16 bpp Sakari Ailus
2026-11-18 13:28 ` [PATCH v13 73/73] media: uapi: Add generic CSI-2 raw pixelformats for 16, 20, 24 and 28 bpp Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118132819.213473-67-sakari.ailus@linux.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=antti.laakso@linux.intel.com \
    --cc=benjamin.mugnier@foss.st.com \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=david.plowman@raspberrypi.com \
    --cc=divyamani.tripathi@intel.com \
    --cc=dongcheng.yan@intel.com \
    --cc=git@apitzsch.eu \
    --cc=hans@jjverkuil.nl \
    --cc=hansg@kernel.org \
    --cc=heimir.sverrisson@gmail.com \
    --cc=hpa@redhat.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=julien.massot@collabora.com \
    --cc=khai.wen.ng@intel.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=manik.bajpai@intel.com \
    --cc=mehdi.djait@linux.intel.com \
    --cc=mirela.rabulea@nxp.com \
    --cc=mkorpershoek@kernel.org \
    --cc=naush@raspberrypi.com \
    --cc=ong.hock.yu@intel.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=r-donadkar@ti.com \
    --cc=ribalda@kernel.org \
    --cc=stefan.klug@ideasonboard.com \
    --cc=sylvain.petinot@foss.st.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=tomm.merciai@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox