From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, pavel@ucw.cz
Subject: Re: [PATCH v2.2 5/5] omap3isp: Quit using struct v4l2_subdev.host_priv field
Date: Wed, 16 Aug 2017 20:24:19 +0300 [thread overview]
Message-ID: <2067172.E4Ie4fgXf9@avalon> (raw)
In-Reply-To: <20170816170552.27961-1-sakari.ailus@linux.intel.com>
Hi Sakari,
Thank you for the patch.
On Wednesday 16 Aug 2017 20:05:52 Sakari Ailus wrote:
> struct v4l2_subdev.host_priv is intended to be used by another driver. This
> is hardly good design but back in the days of platform data was a quick
> hack to get things done.
>
> As the sub-device specific bus information can be stored to the ISP driver
> specific struct allocated along with v4l2_async_subdev, keep the
> information there and only there.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This looks better to me than the previous approach. Please see below for one
last comment.
> ---
> since v2.1:
>
> - Remove struct isp_async_subdev.sd field as it is now redundant.
>
> drivers/media/platform/omap3isp/isp.c | 31 ++++++++------------------
> drivers/media/platform/omap3isp/isp.h | 1 -
> drivers/media/platform/omap3isp/ispccdc.c | 20 ++++++++++++-------
> drivers/media/platform/omap3isp/ispccp2.c | 4 +++-
> drivers/media/platform/omap3isp/ispcsi2.c | 3 ++-
> drivers/media/platform/omap3isp/ispcsiphy.c | 11 +++++-----
> 6 files changed, 33 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c index 6cb1f0495804..27c577fac8e9
> 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -2188,26 +2188,12 @@ static int isp_fwnodes_parse(struct device *dev,
> return -EINVAL;
> }
>
> -static int isp_subdev_notifier_bound(struct v4l2_async_notifier *async,
> - struct v4l2_subdev *subdev,
> - struct v4l2_async_subdev *asd)
> -{
> - struct isp_async_subdev *isd =
> - container_of(asd, struct isp_async_subdev, asd);
> -
> - isd->sd = subdev;
> - isd->sd->host_priv = &isd->bus;
> -
> - return 0;
> -}
> -
> static int isp_subdev_notifier_complete(struct v4l2_async_notifier *async)
> {
> struct isp_device *isp = container_of(async, struct isp_device,
> notifier);
> struct v4l2_device *v4l2_dev = &isp->v4l2_dev;
> struct v4l2_subdev *sd;
> - struct isp_bus_cfg *bus;
> int ret;
>
> ret = media_entity_enum_init(&isp->crashed, &isp->media_dev);
> @@ -2215,13 +2201,15 @@ static int isp_subdev_notifier_complete(struct
> v4l2_async_notifier *async) return ret;
>
> list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
> - /* Only try to link entities whose interface was set on bound
*/
> - if (sd->host_priv) {
> - bus = (struct isp_bus_cfg *)sd->host_priv;
> - ret = isp_link_entity(isp, &sd->entity, bus-
>interface);
> - if (ret < 0)
> - return ret;
> - }
> + struct isp_async_subdev *isd;
> +
> + if (!sd->asd)
> + continue;
> +
> + isd = container_of(sd->asd, struct isp_async_subdev, asd);
> + ret = isp_link_entity(isp, &sd->entity, isd->bus.interface);
> + if (ret < 0)
> + return ret;
> }
>
> ret = v4l2_device_register_subdev_nodes(&isp->v4l2_dev);
> @@ -2399,7 +2387,6 @@ static int isp_probe(struct platform_device *pdev)
> if (ret < 0)
> goto error_register_entities;
>
> - isp->notifier.bound = isp_subdev_notifier_bound;
> isp->notifier.complete = isp_subdev_notifier_complete;
>
> ret = v4l2_async_notifier_register(&isp->v4l2_dev, &isp->notifier);
> diff --git a/drivers/media/platform/omap3isp/isp.h
> b/drivers/media/platform/omap3isp/isp.h index 2f2ae609c548..25472c81dcdd
> 100644
> --- a/drivers/media/platform/omap3isp/isp.h
> +++ b/drivers/media/platform/omap3isp/isp.h
> @@ -226,7 +226,6 @@ struct isp_device {
> };
>
> struct isp_async_subdev {
> - struct v4l2_subdev *sd;
> struct isp_bus_cfg bus;
> struct v4l2_async_subdev asd;
> };
> diff --git a/drivers/media/platform/omap3isp/ispccdc.c
> b/drivers/media/platform/omap3isp/ispccdc.c index
> 4947876cfadf..0145b3dcd7a7 100644
> --- a/drivers/media/platform/omap3isp/ispccdc.c
> +++ b/drivers/media/platform/omap3isp/ispccdc.c
> @@ -1139,8 +1139,12 @@ static void ccdc_configure(struct isp_ccdc_device
> *ccdc) pad = media_entity_remote_pad(&ccdc->pads[CCDC_PAD_SINK]);
> sensor = media_entity_to_v4l2_subdev(pad->entity);
> if (ccdc->input == CCDC_INPUT_PARALLEL) {
> - parcfg = &((struct isp_bus_cfg *)sensor->host_priv)
> - ->bus.parallel;
> + struct isp_pipeline *pipe =
> + to_isp_pipeline(&ccdc->subdev.entity);
> +
> + parcfg = &container_of(pipe->external->asd,
> + struct isp_async_subdev,
> + asd)->bus.bus.parallel;
You use this construct in many places, how about adding
struct isp_bus_cfg *to_bus_cfg(struct v4l2_subdev *sd)
{
return &container_of(sd->asd, struct isp_async_subdev, asd)->bus;
}
or possibly a macro to handle the const/non-const cases.
> ccdc->bt656 = parcfg->bt656;
> }
>
> @@ -2412,11 +2416,13 @@ static int ccdc_link_validate(struct v4l2_subdev
> *sd,
>
> /* We've got a parallel sensor here. */
> if (ccdc->input == CCDC_INPUT_PARALLEL) {
> - struct isp_parallel_cfg *parcfg =
> - &((struct isp_bus_cfg *)
> - media_entity_to_v4l2_subdev(link->source->entity)
> - ->host_priv)->bus.parallel;
> - parallel_shift = parcfg->data_lane_shift;
> + struct isp_pipeline *pipe =
> + to_isp_pipeline(&ccdc->subdev.entity);
> +
> + parallel_shift =
> + container_of(pipe->external->asd,
> + struct isp_async_subdev,
> + asd)->bus.bus.parallel.data_lane_shift;
> } else {
> parallel_shift = 0;
> }
> diff --git a/drivers/media/platform/omap3isp/ispccp2.c
> b/drivers/media/platform/omap3isp/ispccp2.c index
> 3db8df09cd9a..8561c4e4c5ac 100644
> --- a/drivers/media/platform/omap3isp/ispccp2.c
> +++ b/drivers/media/platform/omap3isp/ispccp2.c
> @@ -350,6 +350,7 @@ static void ccp2_lcx_config(struct isp_ccp2_device
> *ccp2, */
> static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
> {
> + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
> const struct isp_bus_cfg *buscfg;
> struct v4l2_mbus_framefmt *format;
> struct media_pad *pad;
> @@ -361,7 +362,8 @@ static int ccp2_if_configure(struct isp_ccp2_device
> *ccp2)
>
> pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
> sensor = media_entity_to_v4l2_subdev(pad->entity);
> - buscfg = sensor->host_priv;
> + buscfg = &container_of(pipe->external->asd,
> + struct isp_async_subdev, asd)->bus;
>
> ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
> if (ret < 0)
> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c
> b/drivers/media/platform/omap3isp/ispcsi2.c index
> 3ec37fed710b..2802f70fc8b3 100644
> --- a/drivers/media/platform/omap3isp/ispcsi2.c
> +++ b/drivers/media/platform/omap3isp/ispcsi2.c
> @@ -566,7 +566,8 @@ static int csi2_configure(struct isp_csi2_device *csi2)
>
> pad = media_entity_remote_pad(&csi2->pads[CSI2_PAD_SINK]);
> sensor = media_entity_to_v4l2_subdev(pad->entity);
> - buscfg = sensor->host_priv;
> + buscfg = &container_of(pipe->external->asd,
> + struct isp_async_subdev, asd)->bus;
>
> csi2->frame_skip = 0;
> v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip);
> diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c
> b/drivers/media/platform/omap3isp/ispcsiphy.c index
> ed1eb9907ae0..ef79bf37c2dd 100644
> --- a/drivers/media/platform/omap3isp/ispcsiphy.c
> +++ b/drivers/media/platform/omap3isp/ispcsiphy.c
> @@ -165,10 +165,9 @@ static int csiphy_set_power(struct isp_csiphy *phy, u32
> power) static int omap3isp_csiphy_config(struct isp_csiphy *phy)
> {
> struct isp_pipeline *pipe = to_isp_pipeline(phy->entity);
> - struct isp_async_subdev *isd =
> - container_of(pipe->external->asd, struct isp_async_subdev,
asd);
> - struct isp_bus_cfg *buscfg = pipe->external->host_priv ?
> - pipe->external->host_priv : &isd->bus;
> + struct isp_bus_cfg *buscfg =
> + &container_of(pipe->external->asd,
> + struct isp_async_subdev, asd)->bus;
> struct isp_csiphy_lanes_cfg *lanes;
> int csi2_ddrclk_khz;
> unsigned int num_data_lanes, used_lanes = 0;
> @@ -311,7 +310,9 @@ void omap3isp_csiphy_release(struct isp_csiphy *phy)
> mutex_lock(&phy->mutex);
> if (phy->entity) {
> struct isp_pipeline *pipe = to_isp_pipeline(phy->entity);
> - struct isp_bus_cfg *buscfg = pipe->external->host_priv;
> + struct isp_bus_cfg *buscfg =
> + &container_of(pipe->external->asd,
> + struct isp_async_subdev, asd)->bus;
>
> csiphy_routing_cfg(phy, buscfg->interface, false,
> buscfg->bus.ccp2.phy_layer);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2017-08-16 17:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 12:51 [PATCH v2 0/5] Omap3isp CCP2 support Sakari Ailus
2017-08-16 12:51 ` [PATCH v2 1/5] omap3isp: Parse CSI1 configuration from the device tree Sakari Ailus
2017-08-16 12:51 ` [PATCH v2 2/5] omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 mode Sakari Ailus
2017-08-16 12:51 ` [PATCH v2 3/5] omap3isp: Always initialise isp and mutex for csiphy1 Sakari Ailus
2017-08-16 12:51 ` [PATCH v2 4/5] omap3isp: csiphy: Don't assume the CSI receiver is a CSI2 module Sakari Ailus
2017-08-16 12:54 ` Laurent Pinchart
2017-08-16 12:51 ` [PATCH v2 5/5] omap3isp: Correctly configure routing in PHY release Sakari Ailus
2017-08-16 16:52 ` [PATCH v2.1 5/5] omap3isp: Quit using struct v4l2_subdev.host_priv field Sakari Ailus
2017-08-16 17:05 ` [PATCH v2.2 " Sakari Ailus
2017-08-16 17:24 ` Laurent Pinchart [this message]
2017-08-16 17:26 ` Sakari Ailus
2017-08-16 17:39 ` [PATCH v2.3 " Sakari Ailus
2017-08-16 19:32 ` Laurent Pinchart
2017-08-16 20:39 ` [PATCH v2.4 " Sakari Ailus
2017-08-17 13:27 ` [PATCH v2.5 " Sakari Ailus
2017-08-17 18:29 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2067172.E4Ie4fgXf9@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).