public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1
Date: Mon, 06 Mar 2017 00:01:13 +0200	[thread overview]
Message-ID: <2336275.pnkIsF6lvT@avalon> (raw)
In-Reply-To: <591c0ba30211d53613a456d51f2bb523e6ef5e06.1488729419.git-series.kieran.bingham+renesas@ideasonboard.com>

Hi Kieran,

Thank you for the patch.

On Sunday 05 Mar 2017 16:00:04 Kieran Bingham wrote:
> Currently we process page flip events on every display interrupt,
> however this does not take into consideration the processing time needed
> by the VSP1 utilised in the pipeline.
> 
> Register a callback with the VSP driver to obtain completion events, and
> track them so that we only perform page flips when the full display
> pipeline has completed for the frame.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c |  8 ++++++--
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h |  1 +
>  drivers/gpu/drm/rcar-du/rcar_du_vsp.c  |  9 +++++++++
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 2aceb84fc15d..caaaa1812e20
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -299,7 +299,7 @@ static void rcar_du_crtc_update_planes(struct
> rcar_du_crtc *rcrtc) * Page Flip
>   */
> 
> -static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
> +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc)
>  {
>  	struct drm_pending_vblank_event *event;
>  	struct drm_device *dev = rcrtc->crtc.dev;
> @@ -571,6 +571,7 @@ static const struct drm_crtc_funcs crtc_funcs = {
>  static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
>  {
>  	struct rcar_du_crtc *rcrtc = arg;
> +	struct rcar_du_device *rcdu = rcrtc->group->dev;
>  	irqreturn_t ret = IRQ_NONE;
>  	u32 status;
> 
> @@ -579,7 +580,10 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
> 
>  	if (status & DSSR_FRM) {
>  		drm_crtc_handle_vblank(&rcrtc->crtc);
> -		rcar_du_crtc_finish_page_flip(rcrtc);
> +
> +		if (rcdu->info->gen < 3)
> +			rcar_du_crtc_finish_page_flip(rcrtc);
> +
>  		ret = IRQ_HANDLED;
>  	}
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h index a7194812997e..ebdbff9d8e59
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -71,5 +71,6 @@ void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc);
> 
>  void rcar_du_crtc_route_output(struct drm_crtc *crtc,
>  			       enum rcar_du_output output);
> +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc);
> 
>  #endif /* __RCAR_DU_CRTC_H__ */
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b0ff304ce3dc..cbb6f54c99ef
> 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> @@ -28,6 +28,13 @@
>  #include "rcar_du_kms.h"
>  #include "rcar_du_vsp.h"
> 
> +static void rcar_du_vsp_complete(void *private)
> +{
> +	struct rcar_du_crtc *crtc = (struct rcar_du_crtc *)private;

I'll remove the cast when applying, as pointed out by Sergei.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +	rcar_du_crtc_finish_page_flip(crtc);
> +}
> +
>  void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
>  {
>  	const struct drm_display_mode *mode = &crtc->crtc.state-
>adjusted_mode;
> @@ -35,6 +42,8 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
>  	struct vsp1_du_lif_config cfg = {
>  		.width = mode->hdisplay,
>  		.height = mode->vdisplay,
> +		.callback = rcar_du_vsp_complete,
> +		.callback_data = crtc,
>  	};
>  	struct rcar_du_plane_state state = {
>  		.state = {

-- 
Regards,

Laurent Pinchart

      parent reply	other threads:[~2017-03-05 22:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-05 16:00 [PATCH v3 0/3] RCAR-DU, VSP1: Prevent pre-emptive frame flips on VSP1-DRM pipelines Kieran Bingham
2017-03-05 16:00 ` [PATCH v3 1/3] v4l: vsp1: Postpone frame end handling in event of display list race Kieran Bingham
2017-03-05 21:58   ` Laurent Pinchart
2017-03-05 16:00 ` [PATCH v3 2/3] v4l: vsp1: Extend VSP1 module API to allow DRM callbacks Kieran Bingham
2017-03-05 21:58   ` Laurent Pinchart
2017-03-05 22:01     ` Kieran Bingham
2017-03-05 16:00 ` [PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1 Kieran Bingham
2017-03-05 16:57   ` Sergei Shtylyov
2017-03-05 22:01   ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2336275.pnkIsF6lvT@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox