From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
tomoharu.fukawa.eb@renesas.com,
Kieran Bingham <kieran.bingham@ideasonboard.com>
Subject: Re: [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic
Date: Fri, 08 Dec 2017 10:33:32 +0200 [thread overview]
Message-ID: <2356040.iMAtxJm5sQ@avalon> (raw)
In-Reply-To: <20171208010842.20047-10-niklas.soderlund+renesas@ragnatech.se>
Hi Niklas,
Thank you for the patch.
On Friday, 8 December 2017 03:08:23 EET Niklas Söderlund wrote:
> The logic to preserve the requested format width and height are too
> complex and come from a premature optimization for Gen3. All Gen2 SoC
> can scale and the Gen3 implementation will not use these functions at
> all so simply preserve the width and height when interacting with the
> subdevice much like the field is preserved simplifies the logic quite a
> bit.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> drivers/media/platform/rcar-vin/rcar-dma.c | 8 --------
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 22 ++++++++++------------
> drivers/media/platform/rcar-vin/rcar-vin.h | 2 --
> 3 files changed, 10 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> b/drivers/media/platform/rcar-vin/rcar-dma.c index
> a7cda3922cb74baa..fd14be20a6604d7a 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -585,14 +585,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
> 0, 0);
> }
>
> -void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
> - u32 width, u32 height)
> -{
> - /* All VIN channels on Gen2 have scalers */
> - pix->width = width;
> - pix->height = height;
> -}
> -
> /*
> ---------------------------------------------------------------------------
> -- * Hardware setup
> */
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> 19de99133f048960..1c5e7f6d5b963740 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -166,6 +166,7 @@ static int __rvin_try_format_source(struct rvin_dev
> *vin, .which = which,
> };
> enum v4l2_field field;
> + u32 width, height;
> int ret;
>
> sd = vin_to_source(vin);
> @@ -178,7 +179,10 @@ static int __rvin_try_format_source(struct rvin_dev
> *vin,
>
> format.pad = vin->digital->source_pad;
>
> + /* Allow the video device to override field and to scale */
> field = pix->field;
> + width = pix->width;
> + height = pix->height;
>
> ret = v4l2_subdev_call(sd, pad, set_fmt, pad_cfg, &format);
> if (ret < 0 && ret != -ENOIOCTLCMD)
> @@ -191,6 +195,9 @@ static int __rvin_try_format_source(struct rvin_dev
> *vin, source->width = pix->width;
> source->height = pix->height;
>
I would move the pix->field = field line not shown above to here.
Apart from that,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + pix->width = width;
> + pix->height = height;
> +
> vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
> source->height);
>
> @@ -204,13 +211,9 @@ static int __rvin_try_format(struct rvin_dev *vin,
> struct v4l2_pix_format *pix,
> struct rvin_source_fmt *source)
> {
> - u32 rwidth, rheight, walign;
> + u32 walign;
> int ret;
>
> - /* Requested */
> - rwidth = pix->width;
> - rheight = pix->height;
> -
> /* Keep current field if no specific one is asked for */
> if (pix->field == V4L2_FIELD_ANY)
> pix->field = vin->format.field;
> @@ -248,10 +251,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
> break;
> }
>
> - /* If source can't match format try if VIN can scale */
> - if (source->width != rwidth || source->height != rheight)
> - rvin_scale_try(vin, pix, rwidth, rheight);
> -
> /* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
>
> @@ -270,9 +269,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
> return -EINVAL;
> }
>
> - vin_dbg(vin, "Requested %ux%u Got %ux%u bpl: %d size: %d\n",
> - rwidth, rheight, pix->width, pix->height,
> - pix->bytesperline, pix->sizeimage);
> + vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> + pix->width, pix->height, pix->bytesperline, pix->sizeimage);
>
> return 0;
> }
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
> b/drivers/media/platform/rcar-vin/rcar-vin.h index
> 646f897f5c05ec4e..36d0f0cc4ce01a6e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -176,8 +176,6 @@ void rvin_v4l2_unregister(struct rvin_dev *vin);
> const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
>
> /* Cropping, composing and scaling */
> -void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
> - u32 width, u32 height);
> void rvin_crop_scale_comp(struct rvin_dev *vin);
>
> #endif
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2017-12-08 8:33 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 1:08 [PATCH v9 00/28] rcar-vin: Add Gen3 with media controller Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
2017-12-08 7:46 ` Laurent Pinchart
2017-12-08 12:55 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions Niklas Söderlund
2017-12-08 7:49 ` Laurent Pinchart
2017-12-08 12:58 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 03/28] rcar-vin: unregister video device on driver removal Niklas Söderlund
2017-12-08 7:54 ` Laurent Pinchart
2017-12-08 8:46 ` Hans Verkuil
2017-12-08 8:49 ` Laurent Pinchart
2017-12-08 13:09 ` Niklas Söderlund
2017-12-08 19:07 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks Niklas Söderlund
2017-12-08 8:03 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 05/28] rcar-vin: move chip information to own struct Niklas Söderlund
2017-12-08 8:08 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 06/28] rcar-vin: move max width and height information to chip information Niklas Söderlund
2017-12-08 8:10 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 07/28] rcar-vin: change name of video device Niklas Söderlund
2017-12-08 8:17 ` Laurent Pinchart
2017-12-14 14:25 ` Sakari Ailus
2017-12-14 15:50 ` Laurent Pinchart
2017-12-20 15:20 ` Niklas Söderlund
2018-01-08 16:35 ` Laurent Pinchart
2018-01-08 16:42 ` Niklas Söderlund
2018-01-08 17:48 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 08/28] rcar-vin: move functions regarding scaling Niklas Söderlund
2017-12-08 8:28 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
2017-12-08 8:33 ` Laurent Pinchart [this message]
2017-12-20 16:17 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 10/28] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
2017-12-08 9:04 ` Laurent Pinchart
2017-12-08 14:14 ` Niklas Söderlund
2017-12-08 19:20 ` Laurent Pinchart
2017-12-20 16:26 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
2017-12-08 9:11 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
2017-12-08 9:35 ` Laurent Pinchart
2017-12-08 14:06 ` Niklas Söderlund
2017-12-08 19:30 ` Laurent Pinchart
2017-12-20 17:17 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
2017-12-08 9:40 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
2017-12-08 9:47 ` Laurent Pinchart
2017-12-20 21:09 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value Niklas Söderlund
2017-12-08 9:52 ` Laurent Pinchart
2017-12-20 21:20 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
2017-12-08 9:52 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 18/28] rcar-vin: break out format alignment and checking Niklas Söderlund
2017-12-08 10:01 ` Laurent Pinchart
2017-12-21 0:25 ` Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
2017-12-08 10:14 ` Laurent Pinchart
2017-12-08 10:24 ` Hans Verkuil
2017-12-08 19:31 ` Laurent Pinchart
2018-01-19 0:46 ` Niklas Söderlund
2018-03-02 11:33 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
2017-12-08 10:20 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 21/28] rcar-vin: add group allocator functions Niklas Söderlund
2017-12-08 20:12 ` Laurent Pinchart
2018-01-08 17:24 ` Niklas Söderlund
2018-01-08 17:57 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info Niklas Söderlund
2017-12-08 20:37 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 23/28] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 24/28] rcar-vin: add link notify for Gen3 Niklas Söderlund
2017-12-08 1:08 ` [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
2017-12-08 20:45 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 26/28] rcar-vin: enable support for r8a7795 Niklas Söderlund
2017-12-08 10:21 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 27/28] rcar-vin: enable support for r8a7796 Niklas Söderlund
2017-12-08 10:25 ` Laurent Pinchart
2017-12-08 1:08 ` [PATCH v9 28/28] rcar-vin: enable support for r8a77970 Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2356040.iMAtxJm5sQ@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=hverkuil@xs4all.nl \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=tomoharu.fukawa.eb@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).