From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sriram V <vshrirama@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: OMAP3 Multiple camera support
Date: Thu, 18 Sep 2014 11:25:25 +0300 [thread overview]
Message-ID: <25198985.8uoHdSYb8S@avalon> (raw)
In-Reply-To: <CAH9_wRM_wd_GkS=j-7pkYTFRg4U1oN=NO+Wfhp56vKturYb+cg@mail.gmail.com>
Hi Sriram,
On Wednesday 17 September 2014 23:06:42 Sriram V wrote:
> Hi
>
> Does OMAP3 camera driver support multiple cameras at the same time.
>
> As i understand - You can have simultaneous YUV422 (Directly to memory)
> and another one passing through camera controller ISP?
>
> I Also, wanted to check if anyone has tried having multiple cameras on omap3
> with the existing driver.
The driver does support capturing from multiple cameras at the same time,
provided one of them is connected to the CSI2A receiver. You can then capture
raw frames from the CSI2A receiver output while processing frames from the
other camera (connected to CSI1/CCP2, CSI2C or parallel interface) using the
whole ISP pipeline.
Please note that the consumer OMAP3 variants are documented by TI as not
including the CSI receivers. However, several developers have reported that
the receivers are present and usable at least in some of the chips.
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-09-18 8:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-17 17:36 OMAP3 Multiple camera support Sriram V
2014-09-18 8:25 ` Laurent Pinchart [this message]
2014-09-18 9:40 ` Sriram V
2014-09-18 9:51 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=25198985.8uoHdSYb8S@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=vshrirama@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox