* [REGRESSION] boot failure on imx8mp due to e0203ddf9af7
@ 2026-03-04 17:03 Franz Schnyder
2026-03-04 22:43 ` Marco Felsch
0 siblings, 1 reply; 3+ messages in thread
From: Franz Schnyder @ 2026-03-04 17:03 UTC (permalink / raw)
To: ming.qian, linux-media
Cc: mchehab, hverkuil-cisco, nicolas, benjamin.gaignard, p.zabel,
sebastian.fricke, shawnguo, ulf.hansson, s.hauer, kernel,
festevam, linux-imx, l.stach, Frank.li, peng.fan, eagle.zhou, imx,
linux-pm, linux-kernel, linux-arm-kernel, regressions
Hello,
Our iMX8MP SoMs (Verdin and Toradex SMARC) fail to boot after
commit e0203ddf9af7 ("media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC").
On rare occasions, it's still able to boot.
It fails after having registered g1 VPU, probably when it tries to
register g2 VPU.
Ming: Any ideas on how to proceed here?
Success::
[ 9.040517] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
[ 9.052133] hantro-vpu 38310000.video-codec: registered nxp,imx8mq-vpu-g2-dec as /dev/video1
Failure with decoded stacktrace::
[ 9.004477] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
[ 9.027097] Unable to handle kernel paging request at virtual address ffffd9c18eb05000
[ 9.027132] Mem abort info:
[ 9.027139] ESR = 0x0000000096000007
[ 9.027147] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9.027156] SET = 0, FnV = 0
[ 9.027164] EA = 0, S1PTW = 0
[ 9.027171] FSC = 0x07: level 3 translation fault
[ 9.027180] Data abort info:
[ 9.027187] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
[ 9.027196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 9.027205] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 9.027215] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000004924f000
[ 9.027226] [ffffd9c18eb05000] pgd=0000000000000000, p4d=10000000496dd003, pud=1000000102e42403, pmd=100000010c33d403, pte=0000000000000000
[ 9.027258] Internal error: Oops: 0000000096000007 [#1] SMP
[ 9.101669] Modules linked in: snd_soc_fsl_sai crypto_engine rng_core imx_pcm_dma authenc snd_soc_fsl_aud2htx snd_soc_fsl_utils imx8mp_interconnect libdes i
mx8mp_hdmi_pai evdev imx8mp_hdmi_tx aes_ce_blk dw_hdmi ghash_ce drm_display_helper snd_soc_simple_card hantro_vpu phy_fsl_imx8mq_usb libaes phy_fsl_samsung_hdm
i snd_soc_simple_card_utils cec phy_fsl_imx8m_pcie v4l2_vp9 imx8mp_hdmi_pvi typec fsl_imx8_ddr_perf snd_soc_imx_hdmi gf128mul samsung_dsim v4l2_h264 etnaviv ti
_ads1015 industrialio_triggered_buffer snd_soc_nau8822 ina2xx lm75 gpu_sched i3c lontium_lt8912b kfifo_buf governor_userspace imx_sdma flexcan imx_aipstz dwc3_
imx8mp imx_bus can_dev spi_nxp_fspi caam spi_imx error pwm_imx27 imx8mm_thermal nvmem_snvs_lpgpr snvs_pwrkey usb_conn_gpio gpio_keys display_connector roles lo
op fuse ipv6 libsha1 autofs4
[ 9.173690] CPU: 3 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.19.0+ #47 PREEMPT
[ 9.181623] Hardware name: Toradex Verdin iMX8M Plus on Verdin Development Board (DT)
[ 9.189462] Workqueue: events_unbound deferred_probe_work_func
[ 9.195314] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 9.202284] pc : of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187)
[ 9.207869] lr : of_find_matching_node_and_match (drivers/of/base.c:1185)
[ 9.213452] sp : ffff8000805dbad0
[ 9.216771] x29: ffff8000805dbad0 x28: 0000000000000000 x27: 0000000000000000
[ 9.223927] x26: 0000000000000000 x25: 0000000000000000 x24: ffffd9c2060d48e0
[ 9.231078] x23: 0000000000000000 x22: ffffd9c18eb05000 x21: ffff0000ff79d7f8
[ 9.238231] x20: 0000000000000000 x19: ffffd9c18eb05000 x18: 00000000ffffffff
[ 9.245385] x17: ffff263ef9a67000 x16: ffffd9c2055d3d54 x15: ffff8000805db870
[ 9.252536] x14: 0000000000000000 x13: 006365646f632d6f x12: 0000000000000001
[ 9.259689] x11: 0000000000000003 x10: 0000000000000020 x9 : 0000000000000000
[ 9.266842] x8 : 0000000000000020 x7 : 00000000ffffffff x6 : ffff0000c4a9d8c8
[ 9.273995] x5 : 0000000000000014 x4 : 0000000000000000 x3 : 0000000000000001
[ 9.281145] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 9.288301] Call trace:
[ 9.290753] of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187) (P)
[ 9.296336] hantro_probe (./include/linux/of.h:983 drivers/media/platform/verisilicon/hantro_drv.c:1047 drivers/media/platform/verisilicon/hantro_drv.c:1225) hantro_vpu
[ 9.301144] platform_probe (drivers/base/platform.c:1449)
[ 9.304815] really_probe (drivers/base/dd.c:583 drivers/base/dd.c:661)
[ 9.308399] __driver_probe_device (drivers/base/dd.c:803)
[ 9.312765] driver_probe_device (drivers/base/dd.c:833)
[ 9.316956] __device_attach_driver (drivers/base/dd.c:962)
[ 9.321415] bus_for_each_drv (drivers/base/bus.c:500)
[ 9.325262] __device_attach (drivers/base/dd.c:1035)
[ 9.329109] device_initial_probe (drivers/base/dd.c:1088)
[ 9.333303] bus_probe_device (drivers/base/bus.c:576)
[ 9.337152] deferred_probe_work_func (drivers/base/dd.c:125 (discriminator 14))
[ 9.341697] process_one_work (kernel/workqueue.c:3268)
[ 9.345719] worker_thread (kernel/workqueue.c:3334 kernel/workqueue.c:3421)
[ 9.349477] kthread (kernel/kthread.c:467)
[ 9.352716] ret_from_fork (arch/arm64/kernel/entry.S:861)
[ 9.356303] Code: 6b14001f 9a93d35a 1a80d294 91032273 (39400264)
All code
========
0: 6b14001f cmp w0, w20
4: 9a93d35a csel x26, x26, x19, le
8: 1a80d294 csel w20, w20, w0, le
c: 91032273 add x19, x19, #0xc8
10:* 39400264 ldrb w4, [x19] <-- trapping instruction
Code starting with the faulting instruction
===========================================
0: 39400264 ldrb w4, [x19]
[ 9.362413] ---[ end trace 0000000000000000 ]---
[ 9.367037] note: kworker/u16:2[45] exited with irqs disabled
[ 9.367134] note: kworker/u16:2[45] exited with preempt_count 1
Thanks,
Franz
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [REGRESSION] boot failure on imx8mp due to e0203ddf9af7
2026-03-04 17:03 [REGRESSION] boot failure on imx8mp due to e0203ddf9af7 Franz Schnyder
@ 2026-03-04 22:43 ` Marco Felsch
2026-03-05 6:22 ` Ming Qian(OSS)
0 siblings, 1 reply; 3+ messages in thread
From: Marco Felsch @ 2026-03-04 22:43 UTC (permalink / raw)
To: Franz Schnyder
Cc: ming.qian, linux-media, linux-arm-kernel, imx, ulf.hansson,
benjamin.gaignard, kernel, sebastian.fricke, linux-pm, festevam,
s.hauer, Frank.li, peng.fan, nicolas, regressions, eagle.zhou,
linux-imx, p.zabel, hverkuil-cisco, mchehab, shawnguo,
linux-kernel, l.stach
Hi Franz,
On 26-03-04, Franz Schnyder wrote:
> Hello,
>
> Our iMX8MP SoMs (Verdin and Toradex SMARC) fail to boot after
> commit e0203ddf9af7 ("media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC").
> On rare occasions, it's still able to boot.
> It fails after having registered g1 VPU, probably when it tries to
> register g2 VPU.
>
> Ming: Any ideas on how to proceed here?
>
> Success::
> [ 9.040517] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
> [ 9.052133] hantro-vpu 38310000.video-codec: registered nxp,imx8mq-vpu-g2-dec as /dev/video1
>
>
> Failure with decoded stacktrace::
>
> [ 9.004477] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
> [ 9.027097] Unable to handle kernel paging request at virtual address ffffd9c18eb05000
This is quite a nasty bug you triggered here! I think the issue is that
the newly added imx8mq_vpu_shared_resources[] is of type __initconst
where as it should be __initconst_or_module. You can test this
assumption if you switch from a module [M] build for the hantro_vpu
driver to a builtin [x] build.
Regards,
Marco
> [ 9.027132] Mem abort info:
> [ 9.027139] ESR = 0x0000000096000007
> [ 9.027147] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 9.027156] SET = 0, FnV = 0
> [ 9.027164] EA = 0, S1PTW = 0
> [ 9.027171] FSC = 0x07: level 3 translation fault
> [ 9.027180] Data abort info:
> [ 9.027187] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
> [ 9.027196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> [ 9.027205] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> [ 9.027215] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000004924f000
> [ 9.027226] [ffffd9c18eb05000] pgd=0000000000000000, p4d=10000000496dd003, pud=1000000102e42403, pmd=100000010c33d403, pte=0000000000000000
> [ 9.027258] Internal error: Oops: 0000000096000007 [#1] SMP
> [ 9.101669] Modules linked in: snd_soc_fsl_sai crypto_engine rng_core imx_pcm_dma authenc snd_soc_fsl_aud2htx snd_soc_fsl_utils imx8mp_interconnect libdes i
> mx8mp_hdmi_pai evdev imx8mp_hdmi_tx aes_ce_blk dw_hdmi ghash_ce drm_display_helper snd_soc_simple_card hantro_vpu phy_fsl_imx8mq_usb libaes phy_fsl_samsung_hdm
> i snd_soc_simple_card_utils cec phy_fsl_imx8m_pcie v4l2_vp9 imx8mp_hdmi_pvi typec fsl_imx8_ddr_perf snd_soc_imx_hdmi gf128mul samsung_dsim v4l2_h264 etnaviv ti
> _ads1015 industrialio_triggered_buffer snd_soc_nau8822 ina2xx lm75 gpu_sched i3c lontium_lt8912b kfifo_buf governor_userspace imx_sdma flexcan imx_aipstz dwc3_
> imx8mp imx_bus can_dev spi_nxp_fspi caam spi_imx error pwm_imx27 imx8mm_thermal nvmem_snvs_lpgpr snvs_pwrkey usb_conn_gpio gpio_keys display_connector roles lo
> op fuse ipv6 libsha1 autofs4
> [ 9.173690] CPU: 3 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.19.0+ #47 PREEMPT
> [ 9.181623] Hardware name: Toradex Verdin iMX8M Plus on Verdin Development Board (DT)
> [ 9.189462] Workqueue: events_unbound deferred_probe_work_func
> [ 9.195314] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 9.202284] pc : of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187)
> [ 9.207869] lr : of_find_matching_node_and_match (drivers/of/base.c:1185)
> [ 9.213452] sp : ffff8000805dbad0
> [ 9.216771] x29: ffff8000805dbad0 x28: 0000000000000000 x27: 0000000000000000
> [ 9.223927] x26: 0000000000000000 x25: 0000000000000000 x24: ffffd9c2060d48e0
> [ 9.231078] x23: 0000000000000000 x22: ffffd9c18eb05000 x21: ffff0000ff79d7f8
> [ 9.238231] x20: 0000000000000000 x19: ffffd9c18eb05000 x18: 00000000ffffffff
> [ 9.245385] x17: ffff263ef9a67000 x16: ffffd9c2055d3d54 x15: ffff8000805db870
> [ 9.252536] x14: 0000000000000000 x13: 006365646f632d6f x12: 0000000000000001
> [ 9.259689] x11: 0000000000000003 x10: 0000000000000020 x9 : 0000000000000000
> [ 9.266842] x8 : 0000000000000020 x7 : 00000000ffffffff x6 : ffff0000c4a9d8c8
> [ 9.273995] x5 : 0000000000000014 x4 : 0000000000000000 x3 : 0000000000000001
> [ 9.281145] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
> [ 9.288301] Call trace:
> [ 9.290753] of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187) (P)
> [ 9.296336] hantro_probe (./include/linux/of.h:983 drivers/media/platform/verisilicon/hantro_drv.c:1047 drivers/media/platform/verisilicon/hantro_drv.c:1225) hantro_vpu
> [ 9.301144] platform_probe (drivers/base/platform.c:1449)
> [ 9.304815] really_probe (drivers/base/dd.c:583 drivers/base/dd.c:661)
> [ 9.308399] __driver_probe_device (drivers/base/dd.c:803)
> [ 9.312765] driver_probe_device (drivers/base/dd.c:833)
> [ 9.316956] __device_attach_driver (drivers/base/dd.c:962)
> [ 9.321415] bus_for_each_drv (drivers/base/bus.c:500)
> [ 9.325262] __device_attach (drivers/base/dd.c:1035)
> [ 9.329109] device_initial_probe (drivers/base/dd.c:1088)
> [ 9.333303] bus_probe_device (drivers/base/bus.c:576)
> [ 9.337152] deferred_probe_work_func (drivers/base/dd.c:125 (discriminator 14))
> [ 9.341697] process_one_work (kernel/workqueue.c:3268)
> [ 9.345719] worker_thread (kernel/workqueue.c:3334 kernel/workqueue.c:3421)
> [ 9.349477] kthread (kernel/kthread.c:467)
> [ 9.352716] ret_from_fork (arch/arm64/kernel/entry.S:861)
> [ 9.356303] Code: 6b14001f 9a93d35a 1a80d294 91032273 (39400264)
> All code
> ========
> 0: 6b14001f cmp w0, w20
> 4: 9a93d35a csel x26, x26, x19, le
> 8: 1a80d294 csel w20, w20, w0, le
> c: 91032273 add x19, x19, #0xc8
> 10:* 39400264 ldrb w4, [x19] <-- trapping instruction
>
> Code starting with the faulting instruction
> ===========================================
> 0: 39400264 ldrb w4, [x19]
> [ 9.362413] ---[ end trace 0000000000000000 ]---
> [ 9.367037] note: kworker/u16:2[45] exited with irqs disabled
> [ 9.367134] note: kworker/u16:2[45] exited with preempt_count 1
>
>
> Thanks,
> Franz
>
>
>
--
#gernperDu
#CallMeByMyFirstName
Pengutronix e.K. | |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [REGRESSION] boot failure on imx8mp due to e0203ddf9af7
2026-03-04 22:43 ` Marco Felsch
@ 2026-03-05 6:22 ` Ming Qian(OSS)
0 siblings, 0 replies; 3+ messages in thread
From: Ming Qian(OSS) @ 2026-03-05 6:22 UTC (permalink / raw)
To: Marco Felsch, Franz Schnyder
Cc: linux-media, linux-arm-kernel, imx, ulf.hansson,
benjamin.gaignard, kernel, sebastian.fricke, linux-pm, festevam,
s.hauer, Frank.li, peng.fan, nicolas, regressions, eagle.zhou,
linux-imx, p.zabel, hverkuil-cisco, mchehab, shawnguo,
linux-kernel, l.stach
Hi,
On 3/5/2026 6:43 AM, Marco Felsch wrote:
> Hi Franz,
>
> On 26-03-04, Franz Schnyder wrote:
>> Hello,
>>
>> Our iMX8MP SoMs (Verdin and Toradex SMARC) fail to boot after
>> commit e0203ddf9af7 ("media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC").
>> On rare occasions, it's still able to boot.
>> It fails after having registered g1 VPU, probably when it tries to
>> register g2 VPU.
>>
>> Ming: Any ideas on how to proceed here?
>>
>> Success::
>> [ 9.040517] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
>> [ 9.052133] hantro-vpu 38310000.video-codec: registered nxp,imx8mq-vpu-g2-dec as /dev/video1
>>
>>
>> Failure with decoded stacktrace::
>>
>> [ 9.004477] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
>> [ 9.027097] Unable to handle kernel paging request at virtual address ffffd9c18eb05000
>
> This is quite a nasty bug you triggered here! I think the issue is that
> the newly added imx8mq_vpu_shared_resources[] is of type __initconst
> where as it should be __initconst_or_module. You can test this
> assumption if you switch from a module [M] build for the hantro_vpu
> driver to a builtin [x] build.
I will correct __initconst to __initconst_or_module.
Thank you for pointing out the issue.
Regards,
Ming
>
> Regards,
> Marco
>
>
>> [ 9.027132] Mem abort info:
>> [ 9.027139] ESR = 0x0000000096000007
>> [ 9.027147] EC = 0x25: DABT (current EL), IL = 32 bits
>> [ 9.027156] SET = 0, FnV = 0
>> [ 9.027164] EA = 0, S1PTW = 0
>> [ 9.027171] FSC = 0x07: level 3 translation fault
>> [ 9.027180] Data abort info:
>> [ 9.027187] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
>> [ 9.027196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
>> [ 9.027205] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
>> [ 9.027215] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000004924f000
>> [ 9.027226] [ffffd9c18eb05000] pgd=0000000000000000, p4d=10000000496dd003, pud=1000000102e42403, pmd=100000010c33d403, pte=0000000000000000
>> [ 9.027258] Internal error: Oops: 0000000096000007 [#1] SMP
>> [ 9.101669] Modules linked in: snd_soc_fsl_sai crypto_engine rng_core imx_pcm_dma authenc snd_soc_fsl_aud2htx snd_soc_fsl_utils imx8mp_interconnect libdes i
>> mx8mp_hdmi_pai evdev imx8mp_hdmi_tx aes_ce_blk dw_hdmi ghash_ce drm_display_helper snd_soc_simple_card hantro_vpu phy_fsl_imx8mq_usb libaes phy_fsl_samsung_hdm
>> i snd_soc_simple_card_utils cec phy_fsl_imx8m_pcie v4l2_vp9 imx8mp_hdmi_pvi typec fsl_imx8_ddr_perf snd_soc_imx_hdmi gf128mul samsung_dsim v4l2_h264 etnaviv ti
>> _ads1015 industrialio_triggered_buffer snd_soc_nau8822 ina2xx lm75 gpu_sched i3c lontium_lt8912b kfifo_buf governor_userspace imx_sdma flexcan imx_aipstz dwc3_
>> imx8mp imx_bus can_dev spi_nxp_fspi caam spi_imx error pwm_imx27 imx8mm_thermal nvmem_snvs_lpgpr snvs_pwrkey usb_conn_gpio gpio_keys display_connector roles lo
>> op fuse ipv6 libsha1 autofs4
>> [ 9.173690] CPU: 3 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.19.0+ #47 PREEMPT
>> [ 9.181623] Hardware name: Toradex Verdin iMX8M Plus on Verdin Development Board (DT)
>> [ 9.189462] Workqueue: events_unbound deferred_probe_work_func
>> [ 9.195314] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>> [ 9.202284] pc : of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187)
>> [ 9.207869] lr : of_find_matching_node_and_match (drivers/of/base.c:1185)
>> [ 9.213452] sp : ffff8000805dbad0
>> [ 9.216771] x29: ffff8000805dbad0 x28: 0000000000000000 x27: 0000000000000000
>> [ 9.223927] x26: 0000000000000000 x25: 0000000000000000 x24: ffffd9c2060d48e0
>> [ 9.231078] x23: 0000000000000000 x22: ffffd9c18eb05000 x21: ffff0000ff79d7f8
>> [ 9.238231] x20: 0000000000000000 x19: ffffd9c18eb05000 x18: 00000000ffffffff
>> [ 9.245385] x17: ffff263ef9a67000 x16: ffffd9c2055d3d54 x15: ffff8000805db870
>> [ 9.252536] x14: 0000000000000000 x13: 006365646f632d6f x12: 0000000000000001
>> [ 9.259689] x11: 0000000000000003 x10: 0000000000000020 x9 : 0000000000000000
>> [ 9.266842] x8 : 0000000000000020 x7 : 00000000ffffffff x6 : ffff0000c4a9d8c8
>> [ 9.273995] x5 : 0000000000000014 x4 : 0000000000000000 x3 : 0000000000000001
>> [ 9.281145] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
>> [ 9.288301] Call trace:
>> [ 9.290753] of_find_matching_node_and_match (drivers/of/base.c:1129 drivers/of/base.c:1120 drivers/of/base.c:1187) (P)
>> [ 9.296336] hantro_probe (./include/linux/of.h:983 drivers/media/platform/verisilicon/hantro_drv.c:1047 drivers/media/platform/verisilicon/hantro_drv.c:1225) hantro_vpu
>> [ 9.301144] platform_probe (drivers/base/platform.c:1449)
>> [ 9.304815] really_probe (drivers/base/dd.c:583 drivers/base/dd.c:661)
>> [ 9.308399] __driver_probe_device (drivers/base/dd.c:803)
>> [ 9.312765] driver_probe_device (drivers/base/dd.c:833)
>> [ 9.316956] __device_attach_driver (drivers/base/dd.c:962)
>> [ 9.321415] bus_for_each_drv (drivers/base/bus.c:500)
>> [ 9.325262] __device_attach (drivers/base/dd.c:1035)
>> [ 9.329109] device_initial_probe (drivers/base/dd.c:1088)
>> [ 9.333303] bus_probe_device (drivers/base/bus.c:576)
>> [ 9.337152] deferred_probe_work_func (drivers/base/dd.c:125 (discriminator 14))
>> [ 9.341697] process_one_work (kernel/workqueue.c:3268)
>> [ 9.345719] worker_thread (kernel/workqueue.c:3334 kernel/workqueue.c:3421)
>> [ 9.349477] kthread (kernel/kthread.c:467)
>> [ 9.352716] ret_from_fork (arch/arm64/kernel/entry.S:861)
>> [ 9.356303] Code: 6b14001f 9a93d35a 1a80d294 91032273 (39400264)
>> All code
>> ========
>> 0: 6b14001f cmp w0, w20
>> 4: 9a93d35a csel x26, x26, x19, le
>> 8: 1a80d294 csel w20, w20, w0, le
>> c: 91032273 add x19, x19, #0xc8
>> 10:* 39400264 ldrb w4, [x19] <-- trapping instruction
>>
>> Code starting with the faulting instruction
>> ===========================================
>> 0: 39400264 ldrb w4, [x19]
>> [ 9.362413] ---[ end trace 0000000000000000 ]---
>> [ 9.367037] note: kworker/u16:2[45] exited with irqs disabled
>> [ 9.367134] note: kworker/u16:2[45] exited with preempt_count 1
>>
>>
>> Thanks,
>> Franz
>>
>>
>>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-03-05 6:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-04 17:03 [REGRESSION] boot failure on imx8mp due to e0203ddf9af7 Franz Schnyder
2026-03-04 22:43 ` Marco Felsch
2026-03-05 6:22 ` Ming Qian(OSS)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox