From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org,
Michal Simek <michal.simek@xilinx.com>,
Chris Kohn <christian.kohn@xilinx.com>,
Hyun Kwon <hyun.kwon@xilinx.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 11/13] v4l: xilinx: Add Xilinx Video IP core
Date: Wed, 05 Nov 2014 17:18:08 +0200 [thread overview]
Message-ID: <2617888.RhoObV0iJg@avalon> (raw)
In-Reply-To: <545754FF.9020208@xs4all.nl>
Hi Hans,
On Monday 03 November 2014 11:12:15 Hans Verkuil wrote:
> Hi Laurent,
>
> Some small nitpicks...
>
> On 11/02/2014 03:53 PM, Laurent Pinchart wrote:
> > Xilinx platforms have no hardwired video capture or video processing
> > interface. Users create capture and memory to memory processing
> > pipelines in the FPGA fabric to suit their particular needs, by
> > instantiating video IP cores from a large library.
> >
> > The Xilinx Video IP core is a framework that models a video pipeline
> > described in the device tree and expose the pipeline to userspace
> > through the media controller and V4L2 APIs.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
> > Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
> > Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> >
> > ---
> >
> > Cc: devicetree@vger.kernel.org
> >
> > Changes since v1:
> >
> > - Remove unnecessary fields from struct xvip_dma_buffer
> > - Fix querycap capabilities and bus_info reporting
> > - Refuse to set format when the queue is busy
> > - Return buffers to vb2 when start_streaming fails
> > - Use vb2 fops and ioctl ops
> >
> > v1 was made of the following individual patches.
> >
> > media: xilinx: vip: Add yuv444 and bayer formats
> > media: xilinx: vip: Remove _TIMING_ from register definition
> > media: xilinx: dma: Add vidioc_enum_fmt_vid_cap callback
> > media: xilinx: dma: Fix alignments of xvip_dma_fops definition
> > media: xilinx: dma: Workaround for bytesperline
> > media: xilinx: vip: Add default min/max height/width definitions
> > media: xilinx: vip: Add common sink/source pad IDs
> > media: xilinx: vip: Add xvip_set_format_size()
> > media: xilinx: vip: Add xvip_enum_mbus_code()
> > media: xilinx: vip: Add xvip_enum_frame_size()
> > media: xilinx: vip: Add register clear and set functions
> > media: xilinx: vip: Add xvip_start()
> > media: xilinx: vip: Add xvip_stop()
> > media: xilinx: vip: Add xvip_set_frame_size()
> > media: xilinx: vip: Add enable/disable reg update functions
> > media: xilinx: vip: Add xvip_print_version()
> > media: xilinx: vip: Add xvip_reset()
> > media: xilinx: vip: Add xvip_get_frame_size()
> > media: xilinx: vip: Add suspend/resume helper functions
> > media: xilinx: vip: Change the return value of xvip_get_format_by_code()
> > media: xilinx: vip: Change the return value of xvip_of_get_format()
> > media: xilinx: vip: Change the return value of xvip_get_format_by_fourcc()
> > media: xilinx: vipp: Remove of_match_ptr()
> > media: xilinx: vipp: Add control to inherit subdevice controls
> > media: xilinx: Make disconnected video nodes return -EPIPE at stream on
> > media: xilinx: Make links configurable
> > media: xilinx: Rename xvip_pipeline_entity to xvip_graph_entity
> > media: xilinx: Rename xvip_pipeline to xvip_composite_device
> > media: xilinx: Rename xvipp_pipeline_* functions to xvip_graph_*
> > media: xilinx: Rename xvipp_v4l2_* functions to xvip_composite_v4l2_*
> > media: xilinx: Rename xvipp_* functions to xvip_composite_*
> > media: xilinx: Move pipeline management code to xilinx-dma.c
> > media: xilinx: Add missing mutex_destroy call
> > media: xilinx: Create xvip_pipeline structure
> > media: xilinx: Support more than two VDMAs in DT
> > media: xilinx: dma: Change vdma configuration to cyclic-mode
> > Revert "media: xilinx: dma: Workaround for bytesperline"
> > media: xilinx: Added DMA error handling
> > media: xilinx: Fix error handling
> > media: xilinx: Reordered mutexes initialization
> > media: xilinx: vipp: Add devicetree bindings documentation
> > media: xilinx: Reordered mutexes initialization
> > media: xilinx: Set format description in enum_fmt
> > media: xilinx: Remove global control handler
> > media: xilinx: dma: Use the interleaved dmaengine API
> > xilinx: Remove .owner field for drivers
> > v4l: xilinx: video: Rename compatible string to xlnx,video
> > v4l: xilinx: Remove axi- prefix from DT properties
> > v4l: xilinx: dma: Give back queued buffers at streamoff time
> > ---
> >
> > .../devicetree/bindings/media/xilinx/video.txt | 52 ++
> > .../bindings/media/xilinx/xlnx,video.txt | 55 ++
> > MAINTAINERS | 9 +
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 2 +
> > drivers/media/platform/xilinx/Kconfig | 10 +
> > drivers/media/platform/xilinx/Makefile | 3 +
> > drivers/media/platform/xilinx/xilinx-dma.c | 770 ++++++++++++++++
> > drivers/media/platform/xilinx/xilinx-dma.h | 109 +++
> > drivers/media/platform/xilinx/xilinx-vip.c | 269 +++++++
> > drivers/media/platform/xilinx/xilinx-vip.h | 227 ++++++
> > drivers/media/platform/xilinx/xilinx-vipp.c | 669 ++++++++++++++++
> > drivers/media/platform/xilinx/xilinx-vipp.h | 49 ++
> > 13 files changed, 2225 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/xilinx/video.txt
> > create mode 100644
> > Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt create
> > mode 100644 drivers/media/platform/xilinx/Kconfig
> > create mode 100644 drivers/media/platform/xilinx/Makefile
> > create mode 100644 drivers/media/platform/xilinx/xilinx-dma.c
> > create mode 100644 drivers/media/platform/xilinx/xilinx-dma.h
> > create mode 100644 drivers/media/platform/xilinx/xilinx-vip.c
> > create mode 100644 drivers/media/platform/xilinx/xilinx-vip.h
> > create mode 100644 drivers/media/platform/xilinx/xilinx-vipp.c
> > create mode 100644 drivers/media/platform/xilinx/xilinx-vipp.h
>
> <snip>
>
> > diff --git a/drivers/media/platform/xilinx/xilinx-dma.c
> > b/drivers/media/platform/xilinx/xilinx-dma.c new file mode 100644
> > index 0000000..a438e4a
> > --- /dev/null
> > +++ b/drivers/media/platform/xilinx/xilinx-dma.c
>
> <snip>
>
> > +/* ----------------------------------------------------------------------
> > + * V4L2 ioctls
> > + */
> > +
> > +static int
> > +xvip_dma_querycap(struct file *file, void *fh, struct v4l2_capability
> > *cap)
> > +{
> > + struct v4l2_fh *vfh = file->private_data;
> > + struct xvip_dma *dma = to_xvip_dma(vfh->vdev);
> > +
> > + cap->capabilities = V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING
> > + | dma->xdev->v4l2_caps;
> > +
> > + if (dma->queue.type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
> > + else
> > + cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
> > +
> > + strlcpy(cap->driver, "xilinx-vipp", sizeof(cap->driver));
> > + strlcpy(cap->card, dma->video.name, sizeof(cap->card));
> > + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
> > + dma->xdev->dev->of_node->name, dma->port);
> > + cap->bus_info[sizeof(cap->bus_info) - 1] = '\0';
>
> I'm fairly certain that snprintf (at least the kernel version) will always
> 0-terminate the string.
Indeed. I'll fix that.
> > +
> > + return 0;
> > +}
> > +
> > +/* FIXME: without this callback function, some applications are not
> > configured
> > + * with correct formats, and it results in frames in wrong format.
> > Whether this
> > + * callback needs to be required is not clearly defined, so it should be
> > + * clarified through the mailing list.
> > + */
> > +static int
> > +xvip_dma_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f)
> > +{
> > + struct v4l2_fh *vfh = file->private_data;
> > + struct xvip_dma *dma = to_xvip_dma(vfh->vdev);
> > +
> > + if (f->index > 0)
> > + return -EINVAL;
> > +
> > + f->pixelformat = dma->format.pixelformat;
> > + strlcpy(f->description, dma->fmtinfo->description,
> > + sizeof(f->description));
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +xvip_dma_get_format(struct file *file, void *fh, struct v4l2_format
> > *format)
> > +{
> > + struct v4l2_fh *vfh = file->private_data;
> > + struct xvip_dma *dma = to_xvip_dma(vfh->vdev);
> > +
> > + format->fmt.pix = dma->format;
> > +
> > + return 0;
> > +}
> > +
> > +static void
> > +__xvip_dma_try_format(struct xvip_dma *dma, struct v4l2_pix_format *pix,
> > + const struct xvip_video_format **fmtinfo)
> > +{
> > + const struct xvip_video_format *info;
> > + unsigned int min_width;
> > + unsigned int max_width;
> > + unsigned int min_bpl;
> > + unsigned int max_bpl;
> > + unsigned int width;
> > + unsigned int align;
> > + unsigned int bpl;
> > +
> > + /* Retrieve format information and select the default format if the
> > + * requested format isn't supported.
> > + */
> > + info = xvip_get_format_by_fourcc(pix->pixelformat);
> > + if (IS_ERR(info))
> > + info = xvip_get_format_by_fourcc(XVIP_DMA_DEF_FORMAT);
> > +
> > + pix->pixelformat = info->fourcc;
> > + pix->colorspace = V4L2_COLORSPACE_SRGB;
>
> See my reply to your reply :-)
>
> > + pix->field = V4L2_FIELD_NONE;
>
> Interlaced formats are not supported at the moment?
No they're not.
> > +
> > + /* The transfer alignment requirements are expressed in bytes.
> > Compute
> > + * the minimum and maximum values, clamp the requested width and
> > convert
> > + * it back to pixels.
> > + */
> > + align = lcm(dma->align, info->bpp);
> > + min_width = roundup(XVIP_DMA_MIN_WIDTH, align);
> > + max_width = rounddown(XVIP_DMA_MAX_WIDTH, align);
> > + width = rounddown(pix->width * info->bpp, align);
> > +
> > + pix->width = clamp(width, min_width, max_width) / info->bpp;
> > + pix->height = clamp(pix->height, XVIP_DMA_MIN_HEIGHT,
> > + XVIP_DMA_MAX_HEIGHT);
> > +
> > + /* Clamp the requested bytes per line value. If the maximum bytes per
> > + * line value is zero, the module doesn't support user configurable
> > line
> > + * sizes. Override the requested value with the minimum in that case.
> > + */
> > + min_bpl = pix->width * info->bpp;
> > + max_bpl = rounddown(XVIP_DMA_MAX_WIDTH, dma->align);
> > + bpl = rounddown(pix->bytesperline, dma->align);
> > +
> > + pix->bytesperline = clamp(bpl, min_bpl, max_bpl);
> > + pix->sizeimage = pix->bytesperline * pix->height;
> > +
> > + if (fmtinfo)
> > + *fmtinfo = info;
> > +}
>
> <snip>
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-11-05 17:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-02 14:53 [PATCH v2 00/13] Xilinx Video IP Core support Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 01/13] media: entity: Document the media_entity_ops structure Laurent Pinchart
2014-11-05 13:52 ` Sakari Ailus
2014-11-02 14:53 ` [PATCH v2 02/13] v4l: Add RBG and RGB 8:8:8 media bus formats on 24 and 32 bit busses Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 03/13] v4l: Sort YUV formats of v4l2_mbus_pixelcode Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 04/13] v4l: Add VUY8 24 bits bus format Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 05/13] v4l: of: Add v4l2_of_parse_link() function Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 06/13] v4l: vb2: Fix race condition in vb2_fop_poll Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 07/13] v4l: vb2: Fix race condition in _vb2_fop_release Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 08/13] dma: xilinx: vdma: Check if the segment list is empty in a descriptor Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 09/13] dma: xilinx: vdma: Allow only one chunk in a line Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 10/13] dma: xilinx: vdma: icg should be difference of stride and hsize Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 11/13] v4l: xilinx: Add Xilinx Video IP core Laurent Pinchart
2014-11-03 10:12 ` Hans Verkuil
2014-11-05 15:18 ` Laurent Pinchart [this message]
2014-11-05 18:36 ` [PATCH v3 " Laurent Pinchart
2014-11-06 3:05 ` Chris Kohn
2014-11-02 14:53 ` [PATCH v2 12/13] v4l: xilinx: Add Video Timing Controller driver Laurent Pinchart
2014-11-02 14:53 ` [PATCH v2 13/13] v4l: xilinx: Add Test Pattern Generator driver Laurent Pinchart
2014-11-03 10:16 ` [PATCH v2 00/13] Xilinx Video IP Core support Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2617888.RhoObV0iJg@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=christian.kohn@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=hyun.kwon@xilinx.com \
--cc=linux-media@vger.kernel.org \
--cc=michal.simek@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).