From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: linux-arm-kernel@lists.infradead.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-imx@nxp.com, kernel@pengutronix.de,
Shawn Guo <shawnguo@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Subject: Re: [PATCH v1 2/2] arm64: dts: imx8mp: Add ISI DT node
Date: Mon, 17 Apr 2023 08:13:04 +0200 [thread overview]
Message-ID: <2678521.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20230417055627.16482-3-laurent.pinchart@ideasonboard.com>
Hi Laurent,
thanks for those ISI patches.
Am Montag, 17. April 2023, 07:56:27 CEST schrieb Laurent Pinchart:
> Add a DT node for the i.MX8MP ISI instance, and model to connection to
> two CSI-2 receivers (CSIS).
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 38 +++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> 2a374a4c14a2..cc7a938b6f73 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1239,6 +1239,38 @@ ldb_lvds_ch1: endpoint {
> };
> };
>
> + isi_0: isi@32e00000 {
> + compatible = "fsl,imx8mp-isi";
> + reg = <0x32e00000 0x4000>;
> + interrupts = <GIC_SPI 16
IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 42
IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
IMX8MP_CLK_MEDIA_AXI_ROOT>,
> + <&clk
IMX8MP_CLK_MEDIA_APB_ROOT>;
> + clock-names = "axi", "apb";
> + fsl,blk-ctrl = <&media_blk_ctrl>;
> + power-domains = <&media_blk_ctrl
IMX8MP_MEDIABLK_PD_ISI>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + isi_in_0: endpoint
{
I'm not sure if DT graph is different, but usually there is an empty line
between properties and subnodes.
Best regards,
Alexander
> + remote-
endpoint = <&mipi_csi_0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + isi_in_1: endpoint
{
> + remote-
endpoint = <&mipi_csi_1_out>;
> + };
> + };
> + };
> + };
> +
> mipi_csi_0: csi@32e40000 {
> compatible = "fsl,imx8mp-mipi-csi2",
"fsl,imx8mm-mipi-csi2";
> reg = <0x32e40000 0x10000>;
> @@ -1265,6 +1297,9 @@ port@0 {
>
> port@1 {
> reg = <1>;
> + mipi_csi_0_out:
endpoint {
> + remote-
endpoint = <&isi_in_0>;
> + };
> };
> };
> };
> @@ -1295,6 +1330,9 @@ port@0 {
>
> port@1 {
> reg = <1>;
> + mipi_csi_1_out:
endpoint {
> + remote-
endpoint = <&isi_in_1>;
> + };
> };
> };
> };
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2023-04-17 6:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-17 5:56 [PATCH v1 0/2] arm64: dts: imx8mp: Enable CSIS and ISI in DT Laurent Pinchart
2023-04-17 5:56 ` [PATCH v1 1/2] arm64: dts: imx8mp: Add CSIS DT nodes Laurent Pinchart
2023-04-17 6:50 ` Marco Felsch
2023-04-17 7:41 ` Laurent Pinchart
2023-04-17 8:01 ` Marco Felsch
2023-04-17 8:15 ` Laurent Pinchart
2023-04-17 8:23 ` Marco Felsch
2023-04-17 9:59 ` Alexander Stein
2023-04-17 12:45 ` Adam Ford
2023-04-17 13:15 ` Marco Felsch
2023-07-07 23:55 ` Tim Harvey
2023-11-29 3:17 ` Adam Ford
2023-11-29 10:55 ` Laurent Pinchart
2023-11-29 20:14 ` Kieran Bingham
2023-11-29 20:55 ` Adam Ford
2023-04-17 5:56 ` [PATCH v1 2/2] arm64: dts: imx8mp: Add ISI DT node Laurent Pinchart
2023-04-17 6:13 ` Alexander Stein [this message]
2023-04-18 9:02 ` [PATCH v1 0/2] arm64: dts: imx8mp: Enable CSIS and ISI in DT Paul Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2678521.mvXUDI8C0e@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox