Linux Media Controller development
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bod@kernel.org>
To: Jiawen Liu <1298662399@qq.com>, mchehab@kernel.org
Cc: hverkuil+cisco@kernel.org, kees@kernel.org,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH v2] media: as102: drop device reference on probe failure
Date: Tue, 23 Jun 2026 09:50:19 +0100	[thread overview]
Message-ID: <2d51a6ab-2d1e-4fa1-9d06-24de1ed9badf@kernel.org> (raw)
In-Reply-To: <tencent_F35CBD76D113E494EEA8930320DCEF7B6506@qq.com>

On 23/06/2026 05:39, Jiawen Liu wrote:
> as102_usb_probe() initializes the kref and takes a USB device reference
> before registering the USB minor.
> 
> The change named in the Fixes tag avoided freeing as102_dev directly
> after usb_register_dev() succeeds, because userspace can open the minor
> before a later probe failure and hold an extra kref until release.
> 
> However, the stream-allocation and DVB-registration failure paths now
> deregister the USB minor and return without dropping the probe path
> initial kref. That leaves the USB device reference held by as102_dev
> leaked.
> 
> Drop the initial reference with kref_put() after usb_deregister_dev(). If
> no userspace file is open, as102_usb_release() releases the USB device
> and frees as102_dev immediately. If a file is open, the final free is
> deferred until the last file release drops the remaining kref.
> 
> Fixes: 8bd29dbe03fc ("media: as102: fix to not free memory after the device is registered in as102_usb_probe()")
> Cc: stable@vger.kernel.org
> Signed-off-by: Jiawen Liu <1298662399@qq.com>
> ---
>   drivers/media/usb/as102/as102_usb_drv.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/media/usb/as102/as102_usb_drv.c b/drivers/media/usb/as102/as102_usb_drv.c
> index a11024451ceb..ad6c5837f1d7 100644
> --- a/drivers/media/usb/as102/as102_usb_drv.c
> +++ b/drivers/media/usb/as102/as102_usb_drv.c
> @@ -405,6 +405,7 @@ static int as102_usb_probe(struct usb_interface *intf,
>   failed_stream:
>   	usb_set_intfdata(intf, NULL);
>   	usb_deregister_dev(intf, &as102_usb_class_driver);
> +	kref_put(&as102_dev->kref, as102_usb_release);
>   	return ret;
>   failed:
>   	usb_put_dev(as102_dev->bus_adap.usb_dev);
> 
> base-commit: 9e7e6633458362db72427b48effad8d759131c35
> --
> 2.34.1
> 

Your kref_put() is correct but, the jump labels should be collapsed down 
to a single return.

diff --git a/drivers/media/usb/as102/as102_usb_drv.c 
b/drivers/media/usb/as102/as102_usb_drv.c
index a11024451cebd..2e6c9b50ee5ff 100644
--- a/drivers/media/usb/as102/as102_usb_drv.c
+++ b/drivers/media/usb/as102/as102_usb_drv.c
@@ -403,13 +403,10 @@ static int as102_usb_probe(struct usb_interface *intf,
  failed_dvb:
         as102_free_usb_stream_buffer(as102_dev);
  failed_stream:
-       usb_set_intfdata(intf, NULL);
         usb_deregister_dev(intf, &as102_usb_class_driver);
-       return ret;
  failed:
-       usb_put_dev(as102_dev->bus_adap.usb_dev);
         usb_set_intfdata(intf, NULL);
-       kfree(as102_dev);
+       kref_put(&as102_dev->kref, as102_usb_release);
         return ret;
  }

---
bod

      reply	other threads:[~2026-06-23  8:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <tmWO8aa9slCLa1R6aBLH7HXyONblpSZfVKYyTaxSL7PYmxsEXUkEpSfd7qvoeuPHxof-wx3-QqD1PoqkUddhOQ==@protonmail.internalid>
2026-06-23  4:39 ` [PATCH v2] media: as102: drop device reference on probe failure Jiawen Liu
2026-06-23  8:50   ` Bryan O'Donoghue [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2d51a6ab-2d1e-4fa1-9d06-24de1ed9badf@kernel.org \
    --to=bod@kernel.org \
    --cc=1298662399@qq.com \
    --cc=hverkuil+cisco@kernel.org \
    --cc=kees@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox