From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Andreas Nagel <andreasnagel@gmx.net>
Cc: linux-media@vger.kernel.org
Subject: Re: Integrate camera interface of OMAP3530 in Angstrom Linux
Date: Mon, 01 Oct 2012 16:08:50 +0200 [thread overview]
Message-ID: <3292965.2Sq8LgAABn@avalon> (raw)
In-Reply-To: <5069958E.3090407@gmx.net>
Hi Andreas,
On Monday 01 October 2012 15:07:26 Andreas Nagel wrote:
> Hi Laurent,
>
> thanks for your reply.
>
> Using a current mainline kernel is a little problematic. Recently I
> compiled the 2.6.39 and it wasn't able to boot at all. The reason for
> this are probably the chips, that are built on the CPU module. Usually,
> a working kernel for this module was undergoing some modifications by
> Technexion because of these chips.
That's why vendors should push board support to the mainline kernel.
> Currently, Technexion only offers the 2.6.32. and 2.6.37 kernel. The
> latter one makes a new device node /dev/media0 available (after
> activating some 'experimental' marked options in the kernel config), but
> I wasn't able to capture any signal.
>
> I'm going to try the latest mainline kernel, but I doubt it will work.
Probably not out of the box, you will likely have to port board support from
the vendor-specific kernel to mainline.
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2012-10-01 14:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 18:00 Integrate camera interface of OMAP3530 in Angstrom Linux Andreas Nagel
2012-09-26 11:41 ` Laurent Pinchart
2012-10-01 13:07 ` Andreas Nagel
2012-10-01 14:08 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3292965.2Sq8LgAABn@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=andreasnagel@gmx.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).