public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Hans Verkuil <hverkuil@xs4all.nl>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	tomoharu.fukawa.eb@renesas.com,
	Kieran Bingham <kieran.bingham@ideasonboard.com>
Subject: Re: [PATCH v9 27/28] rcar-vin: enable support for r8a7796
Date: Fri, 08 Dec 2017 12:25:18 +0200	[thread overview]
Message-ID: <3711108.iWgUgp5RvI@avalon> (raw)
In-Reply-To: <20171208010842.20047-28-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas,

Thank you for the patch.

On Friday, 8 December 2017 03:08:41 EET Niklas Söderlund wrote:
> Add the SoC specific information for Renesas r8a7796.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/media/rcar_vin.txt         |  1 +
>  drivers/media/platform/rcar-vin/rcar-core.c        | 64 +++++++++++++++++++
>  2 files changed, 65 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt
> b/Documentation/devicetree/bindings/media/rcar_vin.txt index
> 5a95d9668d2c7dfd..314743532bbb4523 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -20,6 +20,7 @@ on Gen3 to a CSI-2 receiver.
>     - "renesas,vin-r8a7793" for the R8A7793 device
>     - "renesas,vin-r8a7794" for the R8A7794 device
>     - "renesas,vin-r8a7795" for the R8A7795 device
> +   - "renesas,vin-r8a7796" for the R8A7796 device

I would move this to patch 01/28, it would nicely separate code changes from 
DT bindings changes.

Apart from that, and the fact that I'll trust that the routing table is 
correct,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

All this applies to patch 28/28 as well.

>     - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
>       device.
>     - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device.
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c
> b/drivers/media/platform/rcar-vin/rcar-core.c index
> 66a8144fbba437d3..ed7fbb58ad6846c1 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -1085,6 +1085,66 @@ static const struct rvin_info rcar_info_r8a7795es1 =
> { },
>  };
> 
> +static const struct rvin_info rcar_info_r8a7796 = {
> +	.chip = RCAR_GEN3,
> +	.use_mc = true,
> +	.max_width = 4096,
> +	.max_height = 4096,
> +
> +	.num_chsels = 5,
> +	.chsels = {
> +		{
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +		}, {
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 1 },
> +			{ .csi = RVIN_CSI20, .chan = 1 },
> +		}, {
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 2 },
> +			{ .csi = RVIN_CSI20, .chan = 2 },
> +		}, {
> +			{ .csi = RVIN_CSI40, .chan = 1 },
> +			{ .csi = RVIN_CSI20, .chan = 1 },
> +			{ .csi = RVIN_NC, .chan = 1 },
> +			{ .csi = RVIN_CSI40, .chan = 3 },
> +			{ .csi = RVIN_CSI20, .chan = 3 },
> +		}, {
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +		}, {
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 1 },
> +			{ .csi = RVIN_CSI20, .chan = 1 },
> +		}, {
> +			{ .csi = RVIN_NC, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 0 },
> +			{ .csi = RVIN_CSI20, .chan = 0 },
> +			{ .csi = RVIN_CSI40, .chan = 2 },
> +			{ .csi = RVIN_CSI20, .chan = 2 },
> +		}, {
> +			{ .csi = RVIN_CSI40, .chan = 1 },
> +			{ .csi = RVIN_CSI20, .chan = 1 },
> +			{ .csi = RVIN_NC, .chan = 1 },
> +			{ .csi = RVIN_CSI40, .chan = 3 },
> +			{ .csi = RVIN_CSI20, .chan = 3 },
> +		},
> +	},
> +};
> +
>  static const struct of_device_id rvin_of_id_table[] = {
>  	{
>  		.compatible = "renesas,vin-r8a7778",
> @@ -1118,6 +1178,10 @@ static const struct of_device_id rvin_of_id_table[] =
> { .compatible = "renesas,vin-r8a7795",
>  		.data = &rcar_info_r8a7795,
>  	},
> +	{
> +		.compatible = "renesas,vin-r8a7796",
> +		.data = &rcar_info_r8a7796,
> +	},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, rvin_of_id_table);

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2017-12-08 10:25 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-08  1:08 [PATCH v9 00/28] rcar-vin: Add Gen3 with media controller Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
2017-12-08  7:46   ` Laurent Pinchart
2017-12-08 12:55     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions Niklas Söderlund
2017-12-08  7:49   ` Laurent Pinchart
2017-12-08 12:58     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 03/28] rcar-vin: unregister video device on driver removal Niklas Söderlund
2017-12-08  7:54   ` Laurent Pinchart
2017-12-08  8:46     ` Hans Verkuil
2017-12-08  8:49       ` Laurent Pinchart
2017-12-08 13:09     ` Niklas Söderlund
2017-12-08 19:07       ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks Niklas Söderlund
2017-12-08  8:03   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 05/28] rcar-vin: move chip information to own struct Niklas Söderlund
2017-12-08  8:08   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 06/28] rcar-vin: move max width and height information to chip information Niklas Söderlund
2017-12-08  8:10   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 07/28] rcar-vin: change name of video device Niklas Söderlund
2017-12-08  8:17   ` Laurent Pinchart
2017-12-14 14:25     ` Sakari Ailus
2017-12-14 15:50       ` Laurent Pinchart
2017-12-20 15:20         ` Niklas Söderlund
2018-01-08 16:35           ` Laurent Pinchart
2018-01-08 16:42             ` Niklas Söderlund
2018-01-08 17:48               ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 08/28] rcar-vin: move functions regarding scaling Niklas Söderlund
2017-12-08  8:28   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
2017-12-08  8:33   ` Laurent Pinchart
2017-12-20 16:17     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 10/28] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
2017-12-08  9:04   ` Laurent Pinchart
2017-12-08 14:14     ` Niklas Söderlund
2017-12-08 19:20       ` Laurent Pinchart
2017-12-20 16:26         ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
2017-12-08  9:11   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
2017-12-08  9:35   ` Laurent Pinchart
2017-12-08 14:06     ` Niklas Söderlund
2017-12-08 19:30       ` Laurent Pinchart
2017-12-20 17:17         ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
2017-12-08  9:40   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
2017-12-08  9:47   ` Laurent Pinchart
2017-12-20 21:09     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value Niklas Söderlund
2017-12-08  9:52   ` Laurent Pinchart
2017-12-20 21:20     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
2017-12-08  9:52   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 18/28] rcar-vin: break out format alignment and checking Niklas Söderlund
2017-12-08 10:01   ` Laurent Pinchart
2017-12-21  0:25     ` Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
2017-12-08 10:14   ` Laurent Pinchart
2017-12-08 10:24     ` Hans Verkuil
2017-12-08 19:31       ` Laurent Pinchart
2018-01-19  0:46     ` Niklas Söderlund
2018-03-02 11:33       ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
2017-12-08 10:20   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 21/28] rcar-vin: add group allocator functions Niklas Söderlund
2017-12-08 20:12   ` Laurent Pinchart
2018-01-08 17:24     ` Niklas Söderlund
2018-01-08 17:57       ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info Niklas Söderlund
2017-12-08 20:37   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 23/28] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 24/28] rcar-vin: add link notify for Gen3 Niklas Söderlund
2017-12-08  1:08 ` [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
2017-12-08 20:45   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 26/28] rcar-vin: enable support for r8a7795 Niklas Söderlund
2017-12-08 10:21   ` Laurent Pinchart
2017-12-08  1:08 ` [PATCH v9 27/28] rcar-vin: enable support for r8a7796 Niklas Söderlund
2017-12-08 10:25   ` Laurent Pinchart [this message]
2017-12-08  1:08 ` [PATCH v9 28/28] rcar-vin: enable support for r8a77970 Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3711108.iWgUgp5RvI@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=hverkuil@xs4all.nl \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=tomoharu.fukawa.eb@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox