public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Jammy Huang <jammy_huang@aspeedtech.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "eajames@linux.ibm.com" <eajames@linux.ibm.com>,
	"joel@jms.id.au" <joel@jms.id.au>,
	"andrew@aj.id.au" <andrew@aj.id.au>,
	"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
	"openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-aspeed@lists.ozlabs.org" <linux-aspeed@lists.ozlabs.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] media: aspeed: Use runtime configuration
Date: Wed, 15 Dec 2021 09:04:36 +0800	[thread overview]
Message-ID: <387e8181-c943-9372-48b1-3caadac4caac@aspeedtech.com> (raw)
In-Reply-To: <20211214161216.607df557@coco.lan>

Hi Mauro,

OK, I didn't notice previouso one has been applied.
Thank you.

On 2021/12/14 下午 11:12, Mauro Carvalho Chehab wrote:
> Hi Jammy,
>
> A different version of this patch was already applied. If it still makes
> change, please rebase this one on the top of the media upstream and
> re-send.
>
> Thanks,
> Mauro
>
> Em Tue, 7 Dec 2021 09:55:44 +0800
> Jammy Huang <jammy_huang@aspeedtech.com> escreveu:
>
>> The aspeed video IP has some differences between SoC families. Currently
>> the driver decides which registers to use at compile time, which means
>> a single kernel can not be used between platforms.
>>
>> Switch to using runtime configuration of the registers that vary between
>> SoC families.
>>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>> ---
>>   drivers/media/platform/aspeed-video.c | 71 ++++++++++++++++++++-------
>>   1 file changed, 52 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index d2335d669fb3..ba8ee82b38c3 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -75,11 +75,8 @@
>>   #define  VE_SEQ_CTRL_CAP_BUSY		BIT(16)
>>   #define  VE_SEQ_CTRL_COMP_BUSY		BIT(18)
>>   
>> -#ifdef CONFIG_MACH_ASPEED_G4
>> -#define  VE_SEQ_CTRL_JPEG_MODE		BIT(8)	/* AST2400 */
>> -#else
>> -#define  VE_SEQ_CTRL_JPEG_MODE		BIT(13)	/* AST2500/2600 */
>> -#endif
>> +#define AST2500_VE_SEQ_CTRL_JPEG_MODE	BIT(13)
>> +#define AST2400_VE_SEQ_CTRL_JPEG_MODE	BIT(8)
>>   
>>   #define VE_CTRL				0x008
>>   #define  VE_CTRL_HSYNC_POL		BIT(0)
>> @@ -136,9 +133,8 @@
>>   #define  VE_COMP_CTRL_HQ_DCT_CHR	GENMASK(26, 22)
>>   #define  VE_COMP_CTRL_HQ_DCT_LUM	GENMASK(31, 27)
>>   
>> -#define VE_OFFSET_COMP_STREAM		0x078
>> -
>> -#define VE_JPEG_COMP_SIZE_READ_BACK	0x084
>> +#define AST2400_VE_COMP_SIZE_READ_BACK	0x078
>> +#define AST2600_VE_COMP_SIZE_READ_BACK	0x084
>>   
>>   #define VE_SRC_LR_EDGE_DET		0x090
>>   #define  VE_SRC_LR_EDGE_DET_LEFT	GENMASK(11, 0)
>> @@ -233,6 +229,8 @@ struct aspeed_video {
>>   	struct video_device vdev;
>>   	struct mutex video_lock;	/* v4l2 and videobuf2 lock */
>>   
>> +	struct aspeed_video_config config;
>> +
>>   	wait_queue_head_t wait;
>>   	spinlock_t lock;		/* buffer list lock */
>>   	struct delayed_work res_work;
>> @@ -258,6 +256,30 @@ struct aspeed_video {
>>   
>>   #define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>>   
>> +struct aspeed_video_config {
>> +	u32 version;
>> +	u32 jpeg_mode;
>> +	u32 comp_size_read;
>> +};
>> +
>> +static const struct aspeed_video_config ast2400_config = {
>> +	.version = 4,
>> +	.jpeg_mode = AST2400_VE_SEQ_CTRL_JPEG_MODE,
>> +	.comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK,
>> +};
>> +
>> +static const struct aspeed_video_config ast2500_config = {
>> +	.version = 5,
>> +	.jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
>> +	.comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK,
>> +};
>> +
>> +static const struct aspeed_video_config ast2600_config = {
>> +	.version = 6,
>> +	.jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
>> +	.comp_size_read = AST2600_VE_COMP_SIZE_READ_BACK,
>> +};
>> +
>>   static const u32 aspeed_video_jpeg_header[ASPEED_VIDEO_JPEG_HEADER_SIZE] = {
>>   	0xe0ffd8ff, 0x464a1000, 0x01004649, 0x60000101, 0x00006000, 0x0f00feff,
>>   	0x00002d05, 0x00000000, 0x00000000, 0x00dbff00
>> @@ -640,7 +662,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
>>   	if (sts & VE_INTERRUPT_COMP_COMPLETE) {
>>   		struct aspeed_video_buffer *buf;
>>   		u32 frame_size = aspeed_video_read(video,
>> -						   VE_JPEG_COMP_SIZE_READ_BACK);
>> +						   video->config.comp_size_read);
>>   
>>   		update_perf(&video->perf);
>>   
>> @@ -973,7 +995,7 @@ static void aspeed_video_update_regs(struct aspeed_video *video)
>>   		FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>>   		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
>>   	u32 ctrl = 0;
>> -	u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
>> +	u32 seq_ctrl = video->config.jpeg_mode;
>>   
>>   	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
>>   		 video->frame_rate);
>> @@ -993,7 +1015,7 @@ static void aspeed_video_update_regs(struct aspeed_video *video)
>>   
>>   	/* Set control registers */
>>   	aspeed_video_update(video, VE_SEQ_CTRL,
>> -			    VE_SEQ_CTRL_JPEG_MODE | VE_SEQ_CTRL_YUV420,
>> +			    video->config.jpeg_mode | VE_SEQ_CTRL_YUV420,
>>   			    seq_ctrl);
>>   	aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
>>   	aspeed_video_update(video, VE_COMP_CTRL,
>> @@ -1790,8 +1812,18 @@ static int aspeed_video_init(struct aspeed_video *video)
>>   	return rc;
>>   }
>>   
>> +static const struct of_device_id aspeed_video_of_match[] = {
>> +	{ .compatible = "aspeed,ast2400-video-engine", .data = &ast2400_config },
>> +	{ .compatible = "aspeed,ast2500-video-engine", .data = &ast2500_config },
>> +	{ .compatible = "aspeed,ast2600-video-engine", .data = &ast2600_config },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
>> +
>>   static int aspeed_video_probe(struct platform_device *pdev)
>>   {
>> +	const struct aspeed_video_config *config;
>> +	const struct of_device_id *match;
>>   	int rc;
>>   	struct resource *res;
>>   	struct aspeed_video *video =
>> @@ -1815,6 +1847,13 @@ static int aspeed_video_probe(struct platform_device *pdev)
>>   	if (IS_ERR(video->base))
>>   		return PTR_ERR(video->base);
>>   
>> +	match = of_match_node(aspeed_video_of_match, pdev->dev.of_node);
>> +	if (!match)
>> +		return -EINVAL;
>> +
>> +	config = match->data;
>> +	video->config = *config;
>> +
>>   	rc = aspeed_video_init(video);
>>   	if (rc)
>>   		return rc;
>> @@ -1828,6 +1867,8 @@ static int aspeed_video_probe(struct platform_device *pdev)
>>   
>>   	aspeed_video_debugfs_create(video);
>>   
>> +	dev_info(video->dev, "compatible for g%d\n", config->version);
>> +
>>   	return 0;
>>   }
>>   
>> @@ -1860,14 +1901,6 @@ static int aspeed_video_remove(struct platform_device *pdev)
>>   	return 0;
>>   }
>>   
>> -static const struct of_device_id aspeed_video_of_match[] = {
>> -	{ .compatible = "aspeed,ast2400-video-engine" },
>> -	{ .compatible = "aspeed,ast2500-video-engine" },
>> -	{ .compatible = "aspeed,ast2600-video-engine" },
>> -	{}
>> -};
>> -MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
>> -
>>   static struct platform_driver aspeed_video_driver = {
>>   	.driver = {
>>   		.name = DEVICE_NAME,
>
>
> Thanks,
> Mauro

-- 
Best Regards
Jammy


      reply	other threads:[~2021-12-15  1:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07  1:55 [PATCH] media: aspeed: Use runtime configuration Jammy Huang
2021-12-14 15:12 ` Mauro Carvalho Chehab
2021-12-15  1:04   ` Jammy Huang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=387e8181-c943-9372-48b1-3caadac4caac@aspeedtech.com \
    --to=jammy_huang@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=eajames@linux.ibm.com \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox