Re: [PATCH 1/3] arm64: dts: sc7180: Add Venus video codec DT node

[dikshita@codeaurora.org]

Hi Stan,

Thanks for the review!
I will address all the comments in the next version.

On 2019-12-20 15:04, Stanimir Varbanov wrote:
> Hi Dikshita,
> 
> Thanks for the patch.
> 
> On 12/20/19 9:59 AM, Dikshita Agarwal wrote:
>> This adds Venus video codec DT node for sc7180.
>> 
>> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 36 
>> ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 6876aae2..42c70f5 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -10,6 +10,7 @@
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/clock/qcom,videocc-sc7180.h>
>> 
>>  / {
>>  	interrupt-parent = <&intc>;
>> @@ -66,6 +67,11 @@
>>  			compatible = "qcom,cmd-db";
>>  			no-map;
>>  		};
>> +
>> +		venus_mem: memory@8F600000 {
>> +			reg = <0 0x8F600000 0 0x500000>;
> 
> Please use lower-case for hex numbers.
> 
>> +			no-map;
>> +		};
>>  	};
>> 
>>  	cpus {
>> @@ -1042,6 +1048,36 @@
>>  			};
>>  		};
>> 
>> +		venus: video-codec@aa00000 {
>> +			compatible = "qcom,sc7180-venus";
>> +			reg = <0 0x0aa00000 0 0xff000>;
>> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>> +			power-domains = <&videocc VENUS_GDSC>,
>> +					<&videocc VCODEC0_GDSC>;
>> +			power-domain-names = "venus", "vcodec0";
>> +			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>> +				<&videocc VIDEO_CC_VENUS_AHB_CLK>,
>> +				<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
>> +				<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
>> +				<&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
> 
> could you align those entries to the first one (you can use tabs and
> after that spaces to align)
> 
>> +			clock-names = "core", "iface", "bus",
>> +					"vcodec0_core", "vcodec0_bus";
>> +			iommus = <&apps_smmu 0x0C00 0x60>;
> 
> lower-case please
> 
>> +			memory-region = <&venus_mem>;
>> +
>> +			video-core0 {
>> +					compatible = "venus-decoder";
> 
> something is wrong with the indentation?
> 
> Please run checkpatch with --strict
> 
>> +			};
>> +
>> +			video-core1 {
>> +					compatible = "venus-encoder";
>> +			};
>> +
>> +			video-firmware {
>> +					iommus = <&apps_smmu 0x0C42 0x0>;
> 
> lower-case
> 
>> +			};
> 
> This subnode should be in sc7180-idp.dts, because we assume that by
> default the qcom platforms have TZ.
> 
>> +		};
>> +
>>  		pdc: interrupt-controller@b220000 {
>>  			compatible = "qcom,sc7180-pdc", "qcom,pdc";
>>  			reg = <0 0x0b220000 0 0x30000>;
>>