From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from perceval.ideasonboard.com ([95.142.166.194]:59079 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753608AbaFQLPK convert rfc822-to-8bit (ORCPT ); Tue, 17 Jun 2014 07:15:10 -0400 From: Laurent Pinchart To: =?utf-8?B?0JzQuNGF0LDQudC70L4g0J3QvtCy0L7RgtC90LjQuQ==?= Cc: linux-media@vger.kernel.org Subject: Re: omap3-isp driver in CSI2 mode Date: Tue, 17 Jun 2014 13:15:50 +0200 Message-ID: <4441884.LLcx2kbRvM@avalon> In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Content-Type: text/plain; charset="utf-8" Sender: linux-media-owner@vger.kernel.org List-ID: Hi Michael, (Removing linux-sh and dridevel from the CC list as they're not related) On Tuesday 17 June 2014 12:00:52 Михайло Новотний wrote: > Hi Laurent Pinchart! > > I'm working on multimedia project. And use processor DM3730. > Now I am try capture image from sensor OV5640 over MIPI interface. > I can see that you are author of omap3-isp driver for linux-2.6.37. > I spent more then month try do it, but can't do it. > > I asked on TI forum: > http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/537/p/33699 > 1/1182836.aspx#1182836 > http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/537/p/3030 > 66/1220093.aspx#1220093 > > Is your driver really can work on DM3730 in CSI2 mode? Did you test it on > DM3730? The OMAP3 ISP driver present in the mainline kernel supports the CSI2 receiver. However, the CSI2 interface is not officially available on the DM3730. I have seen reports claiming that the interface is present in the DM3730, but I haven't tested it myself due to lack of hardware. -- Regards, Laurent Pinchart