From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, Sakari Ailus <sakari.ailus@iki.fi>,
Manivannan Sadhasivam <mani@kernel.org>
Subject: Re: [PATCH v1 01/15] media: i2c: imx290: Group functions in sections
Date: Wed, 23 Nov 2022 08:46:45 +0100 [thread overview]
Message-ID: <4790491.31r3eYUQgx@steina-w> (raw)
In-Reply-To: <20221122223250.21233-2-laurent.pinchart@ideasonboard.com>
Hello Laurent,
thanks for working on this.
Am Dienstag, 22. November 2022, 23:32:36 CET schrieb Laurent Pinchart:
> Move functions around to group them in logical sections, in order to
> improve readability. As a result, the IMX290_NUM_SUPPLIES macro has to
> be changed. No other code change is included, only moves.
LGFM.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/i2c/imx290.c | 626 +++++++++++++++++++------------------
> 1 file changed, 325 insertions(+), 301 deletions(-)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index 9954ad7376f7..aae4f51941a1 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -152,13 +152,7 @@
> #define IMX290_PIXEL_ARRAY_RECORDING_WIDTH 1920
> #define IMX290_PIXEL_ARRAY_RECORDING_HEIGHT 1080
>
> -static const char * const imx290_supply_name[] = {
> - "vdda",
> - "vddd",
> - "vdddo",
> -};
> -
> -#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name)
> +#define IMX290_NUM_SUPPLIES 3
>
> struct imx290_regval {
> u32 reg;
> @@ -199,31 +193,14 @@ struct imx290 {
> struct mutex lock;
> };
>
> -struct imx290_pixfmt {
> - u32 code;
> - u8 bpp;
> -};
> +static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
> +{
> + return container_of(_sd, struct imx290, sd);
> +}
>
> -static const struct imx290_pixfmt imx290_formats[] = {
> - { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
> - { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
> -};
> -
> -static const struct regmap_config imx290_regmap_config = {
> - .reg_bits = 16,
> - .val_bits = 8,
> -};
> -
> -static const char * const imx290_test_pattern_menu[] = {
> - "Disabled",
> - "Sequence Pattern 1",
> - "Horizontal Color-bar Chart",
> - "Vertical Color-bar Chart",
> - "Sequence Pattern 2",
> - "Gradation Pattern 1",
> - "Gradation Pattern 2",
> - "000/555h Toggle Pattern",
> -};
> +/*
> ---------------------------------------------------------------------------
> -- + * Modes and formats
> + */
>
> static const struct imx290_regval imx290_global_init_settings[] = {
> { IMX290_CTRL_07, IMX290_WINMODE_1080P },
> @@ -438,10 +415,19 @@ static inline int imx290_modes_num(const struct imx290
> *imx290) return ARRAY_SIZE(imx290_modes_4lanes);
> }
>
> -static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
> -{
> - return container_of(_sd, struct imx290, sd);
> -}
> +struct imx290_pixfmt {
> + u32 code;
> + u8 bpp;
> +};
> +
> +static const struct imx290_pixfmt imx290_formats[] = {
> + { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
> + { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
> +};
> +
> +/*
> ---------------------------------------------------------------------------
> -- + * Register access
> + */
>
> static int __always_unused imx290_read(struct imx290 *imx290, u32 addr, u32
> *value) {
> @@ -501,18 +487,94 @@ static int imx290_set_register_array(struct imx290
> *imx290, return 0;
> }
>
> -/* Stop streaming */
> -static int imx290_stop_streaming(struct imx290 *imx290)
> +static int imx290_set_data_lanes(struct imx290 *imx290)
> {
> - int ret = 0;
> + int ret = 0, laneval, frsel;
>
> - imx290_write(imx290, IMX290_STANDBY, 0x01, &ret);
> + switch (imx290->nlanes) {
> + case 2:
> + laneval = 0x01;
> + frsel = 0x02;
> + break;
> + case 4:
> + laneval = 0x03;
> + frsel = 0x01;
> + break;
> + default:
> + /*
> + * We should never hit this since the data lane count is
> + * validated in probe itself
> + */
> + dev_err(imx290->dev, "Lane configuration not
supported\n");
> + return -EINVAL;
> + }
>
> - msleep(30);
> + imx290_write(imx290, IMX290_PHY_LANE_NUM, laneval, &ret);
> + imx290_write(imx290, IMX290_CSI_LANE_MODE, laneval, &ret);
> + imx290_write(imx290, IMX290_FR_FDG_SEL, frsel, &ret);
>
> - return imx290_write(imx290, IMX290_XMSTA, 0x01, &ret);
> + return ret;
> }
>
> +static int imx290_write_current_format(struct imx290 *imx290)
> +{
> + int ret;
> +
> + switch (imx290->current_format.code) {
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + ret = imx290_set_register_array(imx290,
imx290_10bit_settings,
> + ARRAY_SIZE(
> +
imx290_10bit_settings));
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set format
registers\n");
> + return ret;
> + }
> + break;
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + ret = imx290_set_register_array(imx290,
imx290_12bit_settings,
> + ARRAY_SIZE(
> +
imx290_12bit_settings));
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set format
registers\n");
> + return ret;
> + }
> + break;
> + default:
> + dev_err(imx290->dev, "Unknown pixel format\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static inline u8 imx290_get_link_freq_index(struct imx290 *imx290)
> +{
> + return imx290->current_mode->link_freq_index;
> +}
> +
> +static s64 imx290_get_link_freq(struct imx290 *imx290)
> +{
> + u8 index = imx290_get_link_freq_index(imx290);
> +
> + return *(imx290_link_freqs_ptr(imx290) + index);
> +}
> +
> +static u64 imx290_calc_pixel_rate(struct imx290 *imx290)
> +{
> + s64 link_freq = imx290_get_link_freq(imx290);
> + u8 nlanes = imx290->nlanes;
> + u64 pixel_rate;
> +
> + /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
> + pixel_rate = link_freq * 2 * nlanes;
> + do_div(pixel_rate, imx290->bpp);
> + return pixel_rate;
> +}
> +
> +/*
> ---------------------------------------------------------------------------
> - + * Controls
> + */
> +
> static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct imx290 *imx290 = container_of(ctrl->handler,
> @@ -566,6 +628,187 @@ static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
> .s_ctrl = imx290_set_ctrl,
> };
>
> +static const char * const imx290_test_pattern_menu[] = {
> + "Disabled",
> + "Sequence Pattern 1",
> + "Horizontal Color-bar Chart",
> + "Vertical Color-bar Chart",
> + "Sequence Pattern 2",
> + "Gradation Pattern 1",
> + "Gradation Pattern 2",
> + "000/555h Toggle Pattern",
> +};
> +
> +static int imx290_ctrl_init(struct imx290 *imx290)
> +{
> + struct v4l2_fwnode_device_properties props;
> + unsigned int blank;
> + int ret;
> +
> + ret = v4l2_fwnode_device_parse(imx290->dev, &props);
> + if (ret < 0)
> + return ret;
> +
> + v4l2_ctrl_handler_init(&imx290->ctrls, 9);
> + imx290->ctrls.lock = &imx290->lock;
> +
> + /*
> + * The sensor has an analog gain and a digital gain, both controlled
> + * through a single gain value, expressed in 0.3dB increments.
Values
> + * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher
values
> + * up to 72.0dB (240) add further digital gain. Limit the range to
> + * analog gain only, support for digital gain can be added
separately
> + * if needed.
> + *
> + * The IMX327 and IMX462 are largely compatible with the IMX290, but
> + * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital
> + * gain. When support for those sensors gets added to the driver,
the
> + * gain control should be adjusted accordingly.
> + */
> + v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
> +
> + v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_EXPOSURE, 1, IMX290_VMAX_DEFAULT - 2,
1,
> + IMX290_VMAX_DEFAULT - 2);
> +
> + imx290->link_freq =
> + v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_LINK_FREQ,
> + imx290_link_freqs_num(imx290) -
1, 0,
> + imx290_link_freqs_ptr(imx290));
> + if (imx290->link_freq)
> + imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls,
&imx290_ctrl_ops,
> + V4L2_CID_PIXEL_RATE,
> + 1, INT_MAX, 1,
> +
imx290_calc_pixel_rate(imx290));
> +
> + v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> +
ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> + 0, 0, imx290_test_pattern_menu);
> +
> + blank = imx290->current_mode->hmax - imx290->current_mode->width;
> + imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_HBLANK, blank,
blank, 1,
> + blank);
> + if (imx290->hblank)
> + imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + blank = IMX290_VMAX_DEFAULT - imx290->current_mode->height;
> + imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_VBLANK, blank,
blank, 1,
> + blank);
> + if (imx290->vblank)
> + imx290->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + v4l2_ctrl_new_fwnode_properties(&imx290->ctrls, &imx290_ctrl_ops,
> + &props);
> +
> + imx290->sd.ctrl_handler = &imx290->ctrls;
> +
> + if (imx290->ctrls.error) {
> + ret = imx290->ctrls.error;
> + v4l2_ctrl_handler_free(&imx290->ctrls);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/*
> ---------------------------------------------------------------------------
> - + * Subdev operations
> + */
> +
> +/* Start streaming */
> +static int imx290_start_streaming(struct imx290 *imx290)
> +{
> + int ret;
> +
> + /* Set init register settings */
> + ret = imx290_set_register_array(imx290, imx290_global_init_settings,
> + ARRAY_SIZE(
> +
imx290_global_init_settings));
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set init registers\n");
> + return ret;
> + }
> +
> + /* Apply the register values related to current frame format */
> + ret = imx290_write_current_format(imx290);
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set frame format\n");
> + return ret;
> + }
> +
> + /* Apply default values of current mode */
> + ret = imx290_set_register_array(imx290, imx290->current_mode->data,
> + imx290->current_mode-
>data_size);
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set current mode\n");
> + return ret;
> + }
> +
> + ret = imx290_write(imx290, IMX290_HMAX, imx290->current_mode->hmax,
> + NULL);
> + if (ret)
> + return ret;
> +
> + /* Apply customized values from user */
> + ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> + if (ret) {
> + dev_err(imx290->dev, "Could not sync v4l2 controls\n");
> + return ret;
> + }
> +
> + imx290_write(imx290, IMX290_STANDBY, 0x00, &ret);
> +
> + msleep(30);
> +
> + /* Start streaming */
> + return imx290_write(imx290, IMX290_XMSTA, 0x00, &ret);
> +}
> +
> +/* Stop streaming */
> +static int imx290_stop_streaming(struct imx290 *imx290)
> +{
> + int ret = 0;
> +
> + imx290_write(imx290, IMX290_STANDBY, 0x01, &ret);
> +
> + msleep(30);
> +
> + return imx290_write(imx290, IMX290_XMSTA, 0x01, &ret);
> +}
> +
> +static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct imx290 *imx290 = to_imx290(sd);
> + int ret = 0;
> +
> + if (enable) {
> + ret = pm_runtime_resume_and_get(imx290->dev);
> + if (ret < 0)
> + goto unlock_and_return;
> +
> + ret = imx290_start_streaming(imx290);
> + if (ret) {
> + dev_err(imx290->dev, "Start stream failed\n");
> + pm_runtime_put(imx290->dev);
> + goto unlock_and_return;
> + }
> + } else {
> + imx290_stop_streaming(imx290);
> + pm_runtime_put(imx290->dev);
> + }
> +
> +unlock_and_return:
> +
> + return ret;
> +}
> +
> static struct v4l2_mbus_framefmt *
> imx290_get_pad_format(struct imx290 *imx290, struct v4l2_subdev_state
> *state, u32 which)
> @@ -627,30 +870,6 @@ static int imx290_get_fmt(struct v4l2_subdev *sd,
> return 0;
> }
>
> -static inline u8 imx290_get_link_freq_index(struct imx290 *imx290)
> -{
> - return imx290->current_mode->link_freq_index;
> -}
> -
> -static s64 imx290_get_link_freq(struct imx290 *imx290)
> -{
> - u8 index = imx290_get_link_freq_index(imx290);
> -
> - return *(imx290_link_freqs_ptr(imx290) + index);
> -}
> -
> -static u64 imx290_calc_pixel_rate(struct imx290 *imx290)
> -{
> - s64 link_freq = imx290_get_link_freq(imx290);
> - u8 nlanes = imx290->nlanes;
> - u64 pixel_rate;
> -
> - /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
> - pixel_rate = link_freq * 2 * nlanes;
> - do_div(pixel_rate, imx290->bpp);
> - return pixel_rate;
> -}
> -
> static int imx290_set_fmt(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_format *fmt)
> @@ -774,151 +993,31 @@ static int imx290_entity_init_cfg(struct v4l2_subdev
> *subdev, return 0;
> }
>
> -static int imx290_write_current_format(struct imx290 *imx290)
> -{
> - int ret;
> -
> - switch (imx290->current_format.code) {
> - case MEDIA_BUS_FMT_SRGGB10_1X10:
> - ret = imx290_set_register_array(imx290,
imx290_10bit_settings,
> - ARRAY_SIZE(
> -
imx290_10bit_settings));
> - if (ret < 0) {
> - dev_err(imx290->dev, "Could not set format
registers\n");
> - return ret;
> - }
> - break;
> - case MEDIA_BUS_FMT_SRGGB12_1X12:
> - ret = imx290_set_register_array(imx290,
imx290_12bit_settings,
> - ARRAY_SIZE(
> -
imx290_12bit_settings));
> - if (ret < 0) {
> - dev_err(imx290->dev, "Could not set format
registers\n");
> - return ret;
> - }
> - break;
> - default:
> - dev_err(imx290->dev, "Unknown pixel format\n");
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -/* Start streaming */
> -static int imx290_start_streaming(struct imx290 *imx290)
> -{
> - int ret;
> -
> - /* Set init register settings */
> - ret = imx290_set_register_array(imx290, imx290_global_init_settings,
> - ARRAY_SIZE(
> -
imx290_global_init_settings));
> - if (ret < 0) {
> - dev_err(imx290->dev, "Could not set init registers\n");
> - return ret;
> - }
> -
> - /* Apply the register values related to current frame format */
> - ret = imx290_write_current_format(imx290);
> - if (ret < 0) {
> - dev_err(imx290->dev, "Could not set frame format\n");
> - return ret;
> - }
> -
> - /* Apply default values of current mode */
> - ret = imx290_set_register_array(imx290, imx290->current_mode->data,
> - imx290->current_mode-
>data_size);
> - if (ret < 0) {
> - dev_err(imx290->dev, "Could not set current mode\n");
> - return ret;
> - }
> -
> - ret = imx290_write(imx290, IMX290_HMAX, imx290->current_mode->hmax,
> - NULL);
> - if (ret)
> - return ret;
> -
> - /* Apply customized values from user */
> - ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> - if (ret) {
> - dev_err(imx290->dev, "Could not sync v4l2 controls\n");
> - return ret;
> - }
> -
> - imx290_write(imx290, IMX290_STANDBY, 0x00, &ret);
> -
> - msleep(30);
> -
> - /* Start streaming */
> - return imx290_write(imx290, IMX290_XMSTA, 0x00, &ret);
> -}
> -
> -static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
> -{
> - struct imx290 *imx290 = to_imx290(sd);
> - int ret = 0;
> -
> - if (enable) {
> - ret = pm_runtime_resume_and_get(imx290->dev);
> - if (ret < 0)
> - goto unlock_and_return;
> -
> - ret = imx290_start_streaming(imx290);
> - if (ret) {
> - dev_err(imx290->dev, "Start stream failed\n");
> - pm_runtime_put(imx290->dev);
> - goto unlock_and_return;
> - }
> - } else {
> - imx290_stop_streaming(imx290);
> - pm_runtime_put(imx290->dev);
> - }
> -
> -unlock_and_return:
> -
> - return ret;
> -}
> -
> -static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
> -{
> - unsigned int i;
> -
> - for (i = 0; i < ARRAY_SIZE(imx290->supplies); i++)
> - imx290->supplies[i].supply = imx290_supply_name[i];
> -
> - return devm_regulator_bulk_get(dev, ARRAY_SIZE(imx290->supplies),
> - imx290->supplies);
> -}
> -
> -static int imx290_set_data_lanes(struct imx290 *imx290)
> -{
> - int ret = 0, laneval, frsel;
> -
> - switch (imx290->nlanes) {
> - case 2:
> - laneval = 0x01;
> - frsel = 0x02;
> - break;
> - case 4:
> - laneval = 0x03;
> - frsel = 0x01;
> - break;
> - default:
> - /*
> - * We should never hit this since the data lane count is
> - * validated in probe itself
> - */
> - dev_err(imx290->dev, "Lane configuration not
supported\n");
> - return -EINVAL;
> - }
> -
> - imx290_write(imx290, IMX290_PHY_LANE_NUM, laneval, &ret);
> - imx290_write(imx290, IMX290_CSI_LANE_MODE, laneval, &ret);
> - imx290_write(imx290, IMX290_FR_FDG_SEL, frsel, &ret);
> -
> - return ret;
> -}
> +static const struct v4l2_subdev_video_ops imx290_video_ops = {
> + .s_stream = imx290_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
> + .init_cfg = imx290_entity_init_cfg,
> + .enum_mbus_code = imx290_enum_mbus_code,
> + .enum_frame_size = imx290_enum_frame_size,
> + .get_fmt = imx290_get_fmt,
> + .set_fmt = imx290_set_fmt,
> + .get_selection = imx290_get_selection,
> +};
> +
> +static const struct v4l2_subdev_ops imx290_subdev_ops = {
> + .video = &imx290_video_ops,
> + .pad = &imx290_pad_ops,
> +};
> +
> +static const struct media_entity_operations imx290_subdev_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/*
> ---------------------------------------------------------------------------
> - + * Power management
> + */
>
> static int imx290_power_on(struct device *dev)
> {
> @@ -966,105 +1065,30 @@ static const struct dev_pm_ops imx290_pm_ops = {
> SET_RUNTIME_PM_OPS(imx290_power_off, imx290_power_on, NULL)
> };
>
> -static const struct v4l2_subdev_video_ops imx290_video_ops = {
> - .s_stream = imx290_set_stream,
> -};
> -
> -static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
> - .init_cfg = imx290_entity_init_cfg,
> - .enum_mbus_code = imx290_enum_mbus_code,
> - .enum_frame_size = imx290_enum_frame_size,
> - .get_fmt = imx290_get_fmt,
> - .set_fmt = imx290_set_fmt,
> - .get_selection = imx290_get_selection,
> -};
> +/*
> ---------------------------------------------------------------------------
> - + * Probe & remove
> + */
>
> -static const struct v4l2_subdev_ops imx290_subdev_ops = {
> - .video = &imx290_video_ops,
> - .pad = &imx290_pad_ops,
> +static const struct regmap_config imx290_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> };
>
> -static const struct media_entity_operations imx290_subdev_entity_ops = {
> - .link_validate = v4l2_subdev_link_validate,
> +static const char * const imx290_supply_name[IMX290_NUM_SUPPLIES] = {
> + "vdda",
> + "vddd",
> + "vdddo",
> };
>
> -static int imx290_ctrl_init(struct imx290 *imx290)
> +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
> {
> - struct v4l2_fwnode_device_properties props;
> - unsigned int blank;
> - int ret;
> + unsigned int i;
>
> - ret = v4l2_fwnode_device_parse(imx290->dev, &props);
> - if (ret < 0)
> - return ret;
> + for (i = 0; i < ARRAY_SIZE(imx290->supplies); i++)
> + imx290->supplies[i].supply = imx290_supply_name[i];
>
> - v4l2_ctrl_handler_init(&imx290->ctrls, 9);
> - imx290->ctrls.lock = &imx290->lock;
> -
> - /*
> - * The sensor has an analog gain and a digital gain, both controlled
> - * through a single gain value, expressed in 0.3dB increments.
Values
> - * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher
values
> - * up to 72.0dB (240) add further digital gain. Limit the range to
> - * analog gain only, support for digital gain can be added
separately
> - * if needed.
> - *
> - * The IMX327 and IMX462 are largely compatible with the IMX290, but
> - * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital
> - * gain. When support for those sensors gets added to the driver,
the
> - * gain control should be adjusted accordingly.
> - */
> - v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
> -
> - v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_EXPOSURE, 1, IMX290_VMAX_DEFAULT - 2,
1,
> - IMX290_VMAX_DEFAULT - 2);
> -
> - imx290->link_freq =
> - v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_LINK_FREQ,
> - imx290_link_freqs_num(imx290) -
1, 0,
> - imx290_link_freqs_ptr(imx290));
> - if (imx290->link_freq)
> - imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> -
> - imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls,
&imx290_ctrl_ops,
> - V4L2_CID_PIXEL_RATE,
> - 1, INT_MAX, 1,
> -
imx290_calc_pixel_rate(imx290));
> -
> - v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_TEST_PATTERN,
> -
ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> - 0, 0, imx290_test_pattern_menu);
> -
> - blank = imx290->current_mode->hmax - imx290->current_mode->width;
> - imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_HBLANK, blank,
blank, 1,
> - blank);
> - if (imx290->hblank)
> - imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> -
> - blank = IMX290_VMAX_DEFAULT - imx290->current_mode->height;
> - imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_VBLANK, blank,
blank, 1,
> - blank);
> - if (imx290->vblank)
> - imx290->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> -
> - v4l2_ctrl_new_fwnode_properties(&imx290->ctrls, &imx290_ctrl_ops,
> - &props);
> -
> - imx290->sd.ctrl_handler = &imx290->ctrls;
> -
> - if (imx290->ctrls.error) {
> - ret = imx290->ctrls.error;
> - v4l2_ctrl_handler_free(&imx290->ctrls);
> - return ret;
> - }
> -
> - return 0;
> + return devm_regulator_bulk_get(dev, ARRAY_SIZE(imx290->supplies),
> + imx290->supplies);
> }
>
> /*
next prev parent reply other threads:[~2022-11-23 7:46 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-22 22:32 [PATCH v1 00/15] media: i2c: imx290: Miscellaneous improvements Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 01/15] media: i2c: imx290: Group functions in sections Laurent Pinchart
2022-11-23 7:46 ` Alexander Stein [this message]
2022-11-22 22:32 ` [PATCH v1 02/15] media: i2c: imx290: Factor out subdev init and cleanup to functions Laurent Pinchart
2022-11-23 7:44 ` Alexander Stein
2022-11-23 10:04 ` Laurent Pinchart
2022-11-24 18:31 ` Dave Stevenson
2022-11-24 19:25 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 03/15] media: i2c: imx290: Factor out control update code to a function Laurent Pinchart
2022-11-23 7:51 ` Alexander Stein
2022-11-23 10:08 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 04/15] media: i2c: imx290: Access link_freq_index directly Laurent Pinchart
2022-11-23 7:53 ` Alexander Stein
2022-11-22 22:32 ` [PATCH v1 05/15] media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate() Laurent Pinchart
2022-11-23 9:06 ` Alexander Stein
2022-11-22 22:32 ` [PATCH v1 06/15] media: i2c: imx290: Compute pixel rate and blanking in one place Laurent Pinchart
2022-11-23 7:59 ` Alexander Stein
2022-11-23 9:58 ` Dave Stevenson
2022-11-22 22:32 ` [PATCH v1 07/15] media: i2c: imx290: Factor out black level setting to a function Laurent Pinchart
2022-11-23 8:03 ` Alexander Stein
2022-11-23 10:08 ` Dave Stevenson
2022-11-23 11:00 ` Laurent Pinchart
2022-11-24 15:10 ` Dave Stevenson
2022-11-24 16:57 ` Laurent Pinchart
2022-11-24 17:16 ` David Plowman
2022-11-24 18:02 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 08/15] media: i2c: imx290: Factor out DT parsing to separate function Laurent Pinchart
2022-11-23 8:14 ` Alexander Stein
2022-11-23 10:16 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 09/15] media: i2c: imx290: Use dev_err_probe() Laurent Pinchart
2022-11-23 8:16 ` Alexander Stein
2022-11-22 22:32 ` [PATCH v1 10/15] media: i2c: imx290: Factor out clock initialization to separate function Laurent Pinchart
2022-11-23 8:18 ` Alexander Stein
2022-11-22 22:32 ` [PATCH v1 11/15] media: i2c: imx290: Use V4L2 subdev active state Laurent Pinchart
2022-11-23 8:42 ` Alexander Stein
2022-11-23 10:49 ` Laurent Pinchart
2022-11-28 15:33 ` Alexander Stein
2022-11-28 18:11 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 12/15] media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt Laurent Pinchart
2022-11-23 8:53 ` Alexander Stein
2022-11-22 22:32 ` [PATCH v1 13/15] media: i2c: imx290: Use runtime PM autosuspend Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 14/15] media: i2c: imx290: Configure data lanes at start time Laurent Pinchart
2022-11-23 9:01 ` Alexander Stein
2022-11-23 10:16 ` Dave Stevenson
2022-11-23 14:28 ` Laurent Pinchart
2022-11-24 18:02 ` Dave Stevenson
2022-11-24 19:19 ` Laurent Pinchart
2022-11-22 22:32 ` [PATCH v1 15/15] media: i2c: imx290: Simplify imx290_set_data_lanes() Laurent Pinchart
2022-11-23 9:04 ` Alexander Stein
2022-11-23 10:25 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4790491.31r3eYUQgx@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mani@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox