From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from jackfruit.srv.cs.cmu.edu ([128.2.201.16]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JN6RJ-00079D-LY for linux-dvb@linuxtv.org; Thu, 07 Feb 2008 14:05:17 +0100 Received: from [192.168.1.129] (cm29.delta204.maxonline.com.sg [59.189.204.29]) (authenticated bits=0) by jackfruit.srv.cs.cmu.edu (8.13.6/8.13.6) with ESMTP id m17D5COh013897 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Thu, 7 Feb 2008 08:05:16 -0500 (EST) Message-ID: <47AB0219.8050408@cs.cmu.edu> Date: Thu, 07 Feb 2008 21:05:29 +0800 From: Rajesh Balan MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] HVR1300 not detected by ir_kbd_i2c module List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces@linuxtv.org List-ID: Hi, my new HVR-1300 is not being detected by the ir_kbd_i2c.ko module. I've tracked down the relevant info in the ir_probe component of the module. ir-kbd-i2c: in ir_probe. adap->id=40004 ir-kbd-i2c: in ir_probe. adap->id=1001b ir-kbd-i2cprobe 0x18 @ cx88[0]: no ir-kbd-i2cprobe 0x6b @ cx88[0]: no ir-kbd-i2cprobe 0x71 @ cx88[0]: no and then it exits. as for my card itself, it loads all the other modules fine. The intialization is exactly the same as shown at http://de.pastebin.ca/raw/891927 except that the ir-kbd-i2c parts are not there and this line is different tveeprom 0-0050: Hauppauge model 96019, rev C6A0, serial# 446394 my rev number is D6D3. What do I do to help debug this? Rajesh _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb