From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <linux-dvb-bounces@linuxtv.org>
Received: from chokecherry.srv.cs.cmu.edu ([128.2.185.41])
	by www.linuxtv.org with esmtp (Exim 4.63)
	(envelope-from <rajesh@cs.cmu.edu>) id 1JN6Vw-0007iz-Sz
	for linux-dvb@linuxtv.org; Thu, 07 Feb 2008 14:10:05 +0100
Received: from [192.168.1.129] (cm29.delta204.maxonline.com.sg [59.189.204.29])
	(authenticated bits=0)
	by chokecherry.srv.cs.cmu.edu (8.13.6/8.13.6) with ESMTP id
	m17D9xrr015240
	(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO)
	for <linux-dvb@linuxtv.org>; Thu, 7 Feb 2008 08:10:03 -0500 (EST)
Message-ID: <47AB0337.3050208@cs.cmu.edu>
Date: Thu, 07 Feb 2008 21:10:15 +0800
From: Rajesh Balan <rajesh@cs.cmu.edu>
MIME-Version: 1.0
To: linux-dvb@linuxtv.org
References: <47AB0219.8050408@cs.cmu.edu>
In-Reply-To: <47AB0219.8050408@cs.cmu.edu>
Subject: Re: [linux-dvb] HVR1300 not detected by ir_kbd_i2c module
List-Unsubscribe: <http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb>,
	<mailto:linux-dvb-request@linuxtv.org?subject=unsubscribe>
List-Archive: <http://www.linuxtv.org/pipermail/linux-dvb>
List-Post: <mailto:linux-dvb@linuxtv.org>
List-Help: <mailto:linux-dvb-request@linuxtv.org?subject=help>
List-Subscribe: <http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb>,
	<mailto:linux-dvb-request@linuxtv.org?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: linux-dvb-bounces@linuxtv.org
Errors-To: linux-dvb-bounces@linuxtv.org
List-ID: <linux-dvb@linuxtv.org>


forgot to add. I've tried the current hg sources of both the main v4l 
repo and the hvr1300 specific repo. neither works.

Rajesh

Rajesh Balan wrote:
> Hi,
>
> my new HVR-1300 is not being detected by the ir_kbd_i2c.ko module. I've 
> tracked down the relevant info in the ir_probe component of the module.
>
> ir-kbd-i2c: in ir_probe. adap->id=40004
> ir-kbd-i2c: in ir_probe. adap->id=1001b
> ir-kbd-i2cprobe 0x18 @ cx88[0]: no
> ir-kbd-i2cprobe 0x6b @ cx88[0]: no
> ir-kbd-i2cprobe 0x71 @ cx88[0]: no
>
> and then it exits.
>
> as for my card itself, it loads all the other modules fine. The 
> intialization is exactly the same as shown at   
> http://de.pastebin.ca/raw/891927
>
> except that the ir-kbd-i2c parts are not there and this line is different
>
> tveeprom 0-0050: Hauppauge model 96019, rev C6A0, serial# 446394
>
> my rev number is D6D3.
>
> What do I do to help debug this?
>
> Rajesh
>
>
>
>
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>   


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb