From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from chokecherry.srv.cs.cmu.edu ([128.2.185.41]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JNKik-0001af-FC for linux-dvb@linuxtv.org; Fri, 08 Feb 2008 05:20:14 +0100 Received: from [192.168.1.129] (cm29.delta204.maxonline.com.sg [59.189.204.29]) (authenticated bits=0) by chokecherry.srv.cs.cmu.edu (8.13.6/8.13.6) with ESMTP id m184K4Aw011393 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Thu, 7 Feb 2008 23:20:12 -0500 (EST) Message-ID: <47ABD87B.1040602@cs.cmu.edu> Date: Fri, 08 Feb 2008 12:20:11 +0800 From: Rajesh Balan MIME-Version: 1.0 To: linux-dvb@linuxtv.org References: <47AB0219.8050408@cs.cmu.edu> <47AB0337.3050208@cs.cmu.edu> In-Reply-To: <47AB0337.3050208@cs.cmu.edu> Subject: [linux-dvb] Solved!: Re: HVR1300 not detected by ir_kbd_i2c module List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces@linuxtv.org List-ID: Darron Broad pointed me to the patches available at http://dev.kewl.org/hauppauge/ (get the sfe version for the 1300). The patches applied cleanly about the v4l main tree mercurial source. That fixed the problem. both ir-kbd-i2c and lirc-i2c detect and initialize the IR receiver on the HVR1300 now. Thanks for your help Darron! Rajesh Rajesh Balan wrote: > forgot to add. I've tried the current hg sources of both the main v4l > repo and the hvr1300 specific repo. neither works. > > Rajesh > > Rajesh Balan wrote: > >> Hi, >> >> my new HVR-1300 is not being detected by the ir_kbd_i2c.ko module. I've >> tracked down the relevant info in the ir_probe component of the module. >> >> ir-kbd-i2c: in ir_probe. adap->id=40004 >> ir-kbd-i2c: in ir_probe. adap->id=1001b >> ir-kbd-i2cprobe 0x18 @ cx88[0]: no >> ir-kbd-i2cprobe 0x6b @ cx88[0]: no >> ir-kbd-i2cprobe 0x71 @ cx88[0]: no >> >> and then it exits. >> >> as for my card itself, it loads all the other modules fine. The >> intialization is exactly the same as shown at >> http://de.pastebin.ca/raw/891927 >> >> except that the ir-kbd-i2c parts are not there and this line is different >> >> tveeprom 0-0050: Hauppauge model 96019, rev C6A0, serial# 446394 >> >> my rev number is D6D3. >> >> What do I do to help debug this? >> >> Rajesh >> >> >> >> >> >> >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> >> >> > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb