Re: [linux-dvb] Update to au-Melbourne scan list

Re: [linux-dvb] Update to au-Melbourne scan list

[Bruce Schultz]

[-- Attachment #1.1: Type: text/plain, Size: 1595 bytes --]


On 21/01/08 08:13, Peter D. wrote:
> On Monday 21 January 2008, Bruce Schultz wrote:
>   
>> On 20/01/08 20:47, Peter D. wrote:
>>     
>>> On Sunday 20 January 2008, Jeff Bailes wrote:
>>>       
>>>> Hi,
>>>> 	Back in November, channel Seven changed their fec_hi from 2/3 to 3/4
>>>> causing scans to not pick it up
>>>> ( http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news
>>>> ). The new entry in the au-Melbourne file for channel seven should be:
>>>> # Seven
>>>> T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
>>>>
>>>> I attached the complete updated file anyway.
>>>> 	Jeff
>>>>         
>>> They are a pain.
>>>
>>> Anyway, according to the web site that you quoted, all tuners that
>>> comply with Australian standards will cope without adjustment. 
>>> Unfortunately not all tuners comply with Australian standards.  :-(
>>>
>>> Presumably all au-tuning_files should have their channel 7 entry
>>> updated. Can this be done at the data base end, or do all files have to
>>> be re-submitted?  Also the GI in Brisbane is noted as changing as well.
>>>       
>> I can confirm that the au-Brisbane scan file needs to change. It works
>> now for me with the same channel 7 line that Jeff included above. Scan
>> wasn't finding channel 7 without the change.
>>     
>
> Did you just change fec_hi, or did you change the Guard Interval as 
> well?  The quoted web page states that the GI is now 1/16.  (It is 
> possible that your card is smart enough to sort out GI by itself, 
> but not fec_hi.)  
>   
Sorry about the belated reply.... Yes, I changed the GI to 1/16.



[-- Attachment #1.2: Type: text/html, Size: 2224 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Update to au-Melbourne scan list

[Peter D.]

On Monday 11 February 2008, Bruce Schultz wrote:
> On 21/01/08 08:13, Peter D. wrote:
> > On Monday 21 January 2008, Bruce Schultz wrote:
> >> On 20/01/08 20:47, Peter D. wrote:
> >>> On Sunday 20 January 2008, Jeff Bailes wrote:
> >>>> Hi,
> >>>> 	Back in November, channel Seven changed their fec_hi from 2/3 to
> >>>> 3/4 causing scans to not pick it up
> >>>> (
> >>>> http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news
> >>>> ). The new entry in the au-Melbourne file for channel seven should
> >>>> be: # Seven
> >>>> T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
> >>>>
> >>>> I attached the complete updated file anyway.
> >>>> 	Jeff
> >>>
> >>> They are a pain.
> >>>
> >>> Anyway, according to the web site that you quoted, all tuners that
> >>> comply with Australian standards will cope without adjustment.
> >>> Unfortunately not all tuners comply with Australian standards.  :-(
> >>>
> >>> Presumably all au-tuning_files should have their channel 7 entry
> >>> updated. Can this be done at the data base end, or do all files have
> >>> to be re-submitted?  Also the GI in Brisbane is noted as changing as
> >>> well.
> >>
> >> I can confirm that the au-Brisbane scan file needs to change. It works
> >> now for me with the same channel 7 line that Jeff included above. Scan
> >> wasn't finding channel 7 without the change.
> >
> > Did you just change fec_hi, or did you change the Guard Interval as
> > well?  The quoted web page states that the GI is now 1/16.  (It is
> > possible that your card is smart enough to sort out GI by itself,
> > but not fec_hi.)
>
> Sorry about the belated reply.... Yes, I changed the GI to 1/16.

Bruce, 

That's OK.  

Do you feel competent to submit an updated file for Brisbane?  


-- 
sig goes here...
Peter D.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Update to au-Melbourne scan list

[Christoph Pfister]

Am Samstag 16 Februar 2008 schrieb Peter D.:
> On Monday 11 February 2008, Bruce Schultz wrote:
> > On 21/01/08 08:13, Peter D. wrote:
> > > On Monday 21 January 2008, Bruce Schultz wrote:
<snip>
> > >> I can confirm that the au-Brisbane scan file needs to change. It works
> > >> now for me with the same channel 7 line that Jeff included above. Scan
> > >> wasn't finding channel 7 without the change.
> > >
> > > Did you just change fec_hi, or did you change the Guard Interval as
> > > well?  The quoted web page states that the GI is now 1/16.  (It is
> > > possible that your card is smart enough to sort out GI by itself,
> > > but not fec_hi.)
> >
> > Sorry about the belated reply.... Yes, I changed the GI to 1/16.
>
> Bruce,
>
> That's OK.
>
> Do you feel competent to submit an updated file for Brisbane?

I've already updated the files in the repo (the au-* files containing the 
string "seven"), including the 1/8-->1/16 change for Brisbane.

Christoph

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb