From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.gmx.net ([213.165.64.20]) by www.linuxtv.org with smtp (Exim 4.63) (envelope-from ) id 1JOuCT-0003Xj-8r for linux-dvb@linuxtv.org; Tue, 12 Feb 2008 13:25:25 +0100 Message-ID: <47B19015.20208@gmx.net> Date: Tue, 12 Feb 2008 13:24:53 +0100 From: "P. van Gaans" MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] DiSEqC trouble with TT S-1500 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces@linuxtv.org List-ID: Hi, I've got a Technotrend S-1500 (if it matters: I use it with Kaffeine 0.8.3). It works mostly fine, but there's a strange problem. With my Spaun 4/1 DiSEqC switch (they cost approx 25-40 euro), I can only switch without trouble to position 1 and 2. If I tune directly to position 3 it won't lock. However, if I first tune to a channel on position 1 or 2 and try a channel on position 3 after that, it will work. Position 4 however is completely unreachable. On a standalone receiver, there's no trouble with the same cable. Now Spaun is a really expensive and respected brand. So their switches possibly work in a different way, because a cheap Maximum 4/1 switch works perfectly with the S-1500. Position 1, 2, 3 and 4 all work perfectly. I also did some "dry testing" indoors and it looks like a 7 euro Satconn 4/1 switch would also work fine, but a 17 euro Axing SPU 41-02 probably won't. I'm guessing this could be solved in stv0299.c but I'm not much of an expert. I took a look at the code but I'm not really sure what to do. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb