[linux-dvb] Hauppauge WinTV-HVR 1600

[linux-dvb] Hauppauge WinTV-HVR 1600

[Andreas]

Hallo,
I bought the card today and naturally I am wondering how/what/when the card 
is supported?

Thank you

-- 
Gruß
Andreas

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Steven Toth]

Andreas wrote:
> Hallo,
> I bought the card today and naturally I am wondering how/what/when the card 
> is supported?
> 
> Thank you
> 

Look for the cx18 development trees on linuxtv.org

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Andreas]

Am Montag, 11. Februar 2008 17:49:51 schrieben Sie:
> Andreas wrote:
> > Hallo,
> > I bought the card today and naturally I am wondering how/what/when the
> > card is supported?
> >
> > Thank you
>
> Look for the cx18 development trees on linuxtv.org
>
> - Steve

Steve,
Thank you, I checked out Hans' cx18 tree and tried to compile the moduiles. 
On my AMD x86-64 (Kernel 2.6.24.1) I get an error during compilation. Any 
idea how I can fix that? Going further with make -k compiles the other 
modules, but then make install fails with an error about stripping the 
debug info.

=============================================
make -C ../../../linux-2.6.24.1-35 O=../linux-2.6.24.1-35-obj/x86_64/default 
modules
  CC [M]  /home/andreas/Documents/cx18/v4l/em28xx-audio.o
In file included from /home/andreas/Documents/cx18/v4l/em28xx-audio.c:39:
/usr/src/linux-2.6.24.1-35/include/sound/core.h:281: error: 'SNDRV_CARDS' 
undeclared here (not in a function)
/home/andreas/Documents/cx18/v4l/em28xx-audio.c:58: error: array index in 
initializer not of integer type
/home/andreas/Documents/cx18/v4l/em28xx-audio.c:58: error: (near 
initialization for 'index')
=============================================

-- 
Gruß
Andreas

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Steven Toth]

Andreas wrote:
> Am Montag, 11. Februar 2008 17:49:51 schrieben Sie:
>> Andreas wrote:
>>> Hallo,
>>> I bought the card today and naturally I am wondering how/what/when the
>>> card is supported?
>>>
>>> Thank you
>> Look for the cx18 development trees on linuxtv.org
>>
>> - Steve
> 
> Steve,
> Thank you, I checked out Hans' cx18 tree and tried to compile the moduiles. 
> On my AMD x86-64 (Kernel 2.6.24.1) I get an error during compilation. Any 
> idea how I can fix that? Going further with make -k compiles the other 
> modules, but then make install fails with an error about stripping the 
> debug info.

No idea, the last time I built it (3-4 weeks ago) it was fine.

Does the master tree (http://linuxtv.org/hg/v4l-dvb) build cleanly in 
your environment?

(See the wiki for build instructions).

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Andreas]

Am Dienstag, 12. Februar 2008 06:54:28 schrieben Sie:
> Andreas wrote:
> > Am Montag, 11. Februar 2008 17:49:51 schrieben Sie:
> >> Andreas wrote:
> >>> Hallo,
> >>> I bought the card today and naturally I am wondering how/what/when
> >>> the card is supported?
> >>>
> >>> Thank you
> >>
> >> Look for the cx18 development trees on linuxtv.org
> >>
> >> - Steve
> >
> > Steve,
> > Thank you, I checked out Hans' cx18 tree and tried to compile the
> > moduiles. On my AMD x86-64 (Kernel 2.6.24.1) I get an error during
> > compilation. Any idea how I can fix that? Going further with make -k
> > compiles the other modules, but then make install fails with an error
> > about stripping the debug info.
>
> No idea, the last time I built it (3-4 weeks ago) it was fine.
>
> Does the master tree (http://linuxtv.org/hg/v4l-dvb) build cleanly in
> your environment?
>
> (See the wiki for build instructions).
>
> - Steve

I got the cx18 tree to bulid, installed the card and the driver, and now 
dvbscan gives:
andreas@hal9004:~> dvbscan us-atsc/Cable-Standard-center-frequencies-QAM256
Unable to query frontend status

I get the same message with any of the files in scan/atsc. The card is 
connected to my cable tv outlet.

The card shows up in /dev/dvb/adapter0:
andreas@hal9004:~> ls /dev/dvb/adapter0/
demux0  dvr0  frontend0  net0

What am I missing here? Any pointers?

Thanks!

-- 
Gruß
Andreas

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Steven Toth]

Andreas wrote:
> Am Dienstag, 12. Februar 2008 06:54:28 schrieben Sie:
>> Andreas wrote:
>>> Am Montag, 11. Februar 2008 17:49:51 schrieben Sie:
>>>> Andreas wrote:
>>>>> Hallo,
>>>>> I bought the card today and naturally I am wondering how/what/when
>>>>> the card is supported?
>>>>>
>>>>> Thank you
>>>> Look for the cx18 development trees on linuxtv.org
>>>>
>>>> - Steve
>>> Steve,
>>> Thank you, I checked out Hans' cx18 tree and tried to compile the
>>> moduiles. On my AMD x86-64 (Kernel 2.6.24.1) I get an error during
>>> compilation. Any idea how I can fix that? Going further with make -k
>>> compiles the other modules, but then make install fails with an error
>>> about stripping the debug info.
>> No idea, the last time I built it (3-4 weeks ago) it was fine.
>>
>> Does the master tree (http://linuxtv.org/hg/v4l-dvb) build cleanly in
>> your environment?
>>
>> (See the wiki for build instructions).
>>
>> - Steve
> 
> I got the cx18 tree to bulid, installed the card and the driver, and now 
> dvbscan gives:
> andreas@hal9004:~> dvbscan us-atsc/Cable-Standard-center-frequencies-QAM256
> Unable to query frontend status
> 
> I get the same message with any of the files in scan/atsc. The card is 
> connected to my cable tv outlet.
> 
> The card shows up in /dev/dvb/adapter0:
> andreas@hal9004:~> ls /dev/dvb/adapter0/
> demux0  dvr0  frontend0  net0
> 
> What am I missing here? Any pointers?

ATSC isn't supported yet. Try analog.

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Andreas]

Am Dienstag, 12. Februar 2008 13:18:27 schrieben Sie:
> > What am I missing here? Any pointers?
>
> ATSC isn't supported yet. Try analog.
>
> - Steve

Oh well, that explains it of course :P

Do you know if dvb support is planned for the near future?
I can still return the card... 

-- 
Gruß
Andreas

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Hauppauge WinTV-HVR 1600

[Steven Toth]

Andreas wrote:
> Am Dienstag, 12. Februar 2008 13:18:27 schrieben Sie:
>>> What am I missing here? Any pointers?
>> ATSC isn't supported yet. Try analog.
>>
>> - Steve
> 
> Oh well, that explains it of course :P
> 
> Do you know if dvb support is planned for the near future?
> I can still return the card... 
> 

It's on my todo list.

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb