Re: [linux-dvb] Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and DVB-S2

["Jens Krehbiel-Gräther" <linux-dvb@okg-computer.de>]

Hi!

Here is the complete log.

syslog from loading the modules:

Feb 12 13:57:34 dev kernel: usb 3-6: new high speed USB device using 
ehci_hcd and address 3
Feb 12 13:57:34 dev kernel: usb 3-6: configuration #1 chosen from 1 choice
Feb 12 13:57:34 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state.
Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 1
Feb 12 13:57:34 dev kernel: dvb-usb: will pass the complete MPEG2 
transport stream to the software demuxer.
Feb 12 13:57:34 dev kernel: DVB: registering new adapter (PCTV HDTV USB)
Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Enter
Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1b6]: 02
Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c2]: 00
Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c3]: 00
Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf141]: 02
Feb 12 13:57:34 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=81
Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: ID reg=[0x81]
Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Device ID=[8], Release=[1]
Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base 
address=[0x00000400], Offset=[0xf334], Data=[0x444d4431]
Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base 
address=[0x00000400], Offset=[0xf33c], Data=[0x00000001]
Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Demodulator Core 
ID=[DMD1], Version=[1]
Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base 
address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331]
Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base 
address=[0x00000800], Offset=[0xfa34], Data=[0x00000001]
Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], 
Version=[1]
Feb 12 13:57:34 dev kernel: stb0899_attach: Attaching STB0899
Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0)
Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 0x60)
Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Leave Ok
Feb 12 13:57:34 dev kernel: DVB: registering frontend 0 (STB0899 
Multistandard)...
Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Enter
Feb 12 13:57:34 dev kernel: stb6100_attach: Attaching STB6100
Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Leave
Feb 12 13:57:34 dev kernel: input: IR-receiver inside an USB DVB 
receiver as /class/input/input5
Feb 12 13:57:34 dev kernel: dvb-usb: schedule remote query interval to 
100 msecs.
Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 0
Feb 12 13:57:34 dev kernel: dvb-usb: PCTV HDTV USB successfully 
initialized and connected.
Feb 12 13:57:34 dev kernel: usbcore: registered new interface driver 
pctv452e


And a complete log from a complete scan on Astra 19,2°E can you download 
here (about 1,6MB uncompressed, for Download 37kB gzip-File):
http://www.rz.uni-karlsruhe.de/~ry52/syslog.gz

If you see anything that can help me, please let me know. I don't 
believe that the new device has also a hardware failiure, because (as I 
wrote) it works for one time scanning and one time tuning... :-(

Hope to get help here,

Jens

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb