From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m1E10ap1017731 for ; Wed, 13 Feb 2008 20:00:36 -0500 Received: from mailout05.sul.t-online.com (mailout05.sul.t-online.de [194.25.134.82]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m1E10EPm032109 for ; Wed, 13 Feb 2008 20:00:14 -0500 Message-ID: <47B392A5.2030908@t-online.de> Date: Thu, 14 Feb 2008 02:00:21 +0100 From: Hartmut Hackmann MIME-Version: 1.0 To: LInux DVB , Linux and Kernel Video Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Cc: Subject: Mdeion / Creatix CTX948 DVB-S driver is ready for testing List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi, folks In my personal repository: http://linuxtv.org/hg/~hhackmann/v4l-dvb-experimental/ you will find a driver that supports this card, DVB-T and DVB-S It might also work for - one section of the MD8800 - similar boards based on saa713x, tda10086, tda826x, isl6405 The board will show up as MD8800. According to Hermann, the configurations for analog TV and DVB-T are identical. If you want to use the board with DVB-S, you will need to load the saa7134-dvb module with the option "use_frontend=1". The default 0 is DVB-T. For those who got the board from a second source: don't forget to connect the 12v (the floppy supply) connector. I don't have a dish, so i depend on your reports. To get the MD8800 running, i need a volunteer who does the testing for me. He should be able to apply patches, compile the driver and read kernel logs. Good luck Hartmut -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list